Projects of village houses with a Russian stove. Layout of houses with a stove

Stove heating makes its own adjustments to the architecture of the house - professionals begin designing a building by choosing the type of hearth and the place for its construction. The project of a house with a Russian stove is always different from a project in which the main role is played by a "Swede" or a modern cast-iron convection oven. The main task of the designer is to correctly determine the place of installation of the heating device and plan the placement of rooms so that each room is warm and dry.

Features of the design of housing with stove heating

Stove heating, which does not have a water circuit, will only be effective if the stove becomes the center of all adjacent rooms. To achieve this, the hearth is installed in the wall between the rooms, and the firebox is taken out into the corridor or into the kitchen.

One hearth for four isolated rooms

Some architects offer another option for solving the problem - the installation of two or even three hearths in different rooms. However, a central heating unit is preferable to the construction of several heat sources - this allows you to do with one chimney and significantly saves fuel consumption.

In projects of two-story houses with stove heating, they adhere to the same rules, but they necessarily provide for a reliable overlap between floors that can withstand the mass of a brick building. All heavy parts (stove bench, oven, hob) are placed on the ground floor, and at the top they are limited only by the heating shield.

If the house is planned according to the principle of a studio and consists of one large room, the Russian stove is made the central link, simultaneously entrusting it with the tasks of separating the space. Thus, the hearth can separate the kitchen and living room, sleeping area and common room.

Russian stove with a stove bench in a house with a large living room and bedroom

Enlarged doorway in the bedroom does not impede air exchange

Examples of interesting layouts of houses with stove heating

Considering projects of houses with a stove, it is worth considering not only the size of buildings and layout features, but also the materials used for the construction of buildings. Not all options designed for brick structures are suitable for wooden structures.

Small country house with a veranda

This small house has one living room of 15 sq. meters and a kitchen-dining room with an area of ​​8 sq. meters. The project provides for a small bathroom, the entrance to which is in the kitchen, and an unheated veranda.

House project with stove heating (building dimensions 5 * 7 meters)

The heating device is located in the center of the building and heats all the internal premises: the kitchen, the room and the bathroom. The firebox is located on the side of the kitchen; here it is recommended to equip a hob and an oven. If hot water is needed in the house, then the authors of the project consider the bathroom as the best place for a hot water tank.

From the side of the living room, it is easy to supplement the stove with a false fireplace, providing a small depression in the wall. A decorative fireplace insert will not only decorate the room, but also increase heat transfer, playing the role of traditional stoves used in the construction of Russian stoves.

Wooden house with two living rooms and a bathroom

This log house has two adjoining rooms - a bedroom and a living room with a kitchen-dining room. The hearth in the wall heats all four rooms, including the hallway and the bathroom. The couch is brought out to the bedroom, where it serves as a resting place and increases the heat transfer of the heating device, remaining warm for a long time.

The plan of the hut with a Russian stove

There is a dryer in the hallway - it is convenient to dry wet shoes and clothes on it. The kitchen has a stove. For the warm season, a summer course is provided, which allows you to use only the stove without using the heating.

Layout of a house with two bedrooms and a living room

This house is designed for permanent residence and includes two bedrooms, a living room with a kitchen, a bathroom and a storage room. The stove is in the wall and heats the kitchen-living room and both bedrooms. The bathroom is not heated, but it borders on the hallway, into which one of the stove corners is led out. If a woodburning hearth is the main source of heat, it makes sense to increase its efficiency with air ducts.

Residential building project with stove heating

The kitchen is equipped with a hob and oven. There is no door in the living room, so the heat is evenly distributed throughout the house. If you plan to build a Russian stove with a stove bench, then it is best to build a trestle bed in one of the bedrooms.

Brick house project with two ovens

In a large house for permanent residence, in some cases, two separate stoves are installed. This building has two bedrooms, a living room and a separate kitchen. The main reversible heating stove is installed between the living room and the children's room. The furnace door and the building's body open into the living room, and the nursery is heated roughly - this arrangement prevents carbon monoxide from entering the children's bedroom.

A second fireplace with stove and oven is located in the kitchen and heats the adults' bedroom. The design of this model can work in winter and summer - in the warm season, summer dampers are opened, through which hot gases quickly go into the chimney.

Heat enters the corridor from the kitchen, the room is small, so it is enough to leave the door open to ensure a comfortable temperature in the hallway. There is no heat leakage to the street, since the cold air flow is cut off by the glazed veranda.

With all the variety of ready-made projects for houses with a stove, we recommend that you contact a specialist and order an individual plan, expressing your wishes. If you choose one of the schemes, you need to show the drawing to a professional, perhaps he will make useful adjustments and advise how to make stove heating as efficient as possible, and the house - comfortable and cozy.

Video: stove in a home heating system

Building your own home in most cases starts with a desire. And also after the moment when a person realizes that he can afford to build a suburban real estate. In such cases, there is often only a rough idea of ​​how the interior of the building should look like, what systems will be used, etc. While working with builders, many questions arise, one of which concerns the method of heating the premises. And if a stove is chosen as the main source of heat, then how to design a house? Consider options with different oven sizes.

Collapse

Projects of houses with a Russian stove

The size of the stove largely depends on the planned size of the house itself and the purposes for which it will be used. Therefore, it is worth deciding in advance on the main functionality that you plan to endow the house with. Now we will consider one-story house designs with a Russian stove.

5x6 meters

Such a small house is suitable only for temporary stay. An example of such a structure is shown in the picture below. For such a log house, a large furnace is not required, and it is more profitable to put it as an object for zoning the adjacent territory.

In this case, it is much more effective to leave the rooms without separation, then the heat will be evenly distributed over the necessary places and not be retained by the walls.

6x6 meters

Such a layout can be done for, again, a small country house, where you can move in in the summer, and go home when frost comes. At the same time, for heating and for cooking, you can build the same small oven. For her, it is not necessary to make a stove bench, if you can get by with a Europeanized version of the stove.

6x9 meters

When you plan to build a house in which you can live with a small family almost all year round, you should think in advance about the heating system. In many regions of Russia, using electricity for heating in cold winters will lead to high electricity bills. At the same time, not all regions have access to the use of gas. Plus, you will need a special permit to conduct it. Thus, the classic Russian stove becomes one of the saving heating options.

7x7 meters

This is a more spacious house, which requires much more heat. To live like this all year round, some people want to install diesel heating. However, to implement this idea, it will be necessary to create a special storage facility, which will contain at least 3 tons of diesel fuel. At the same time, a properly folded stove will help provide the home with the necessary level of heat, and no room will remain cold.

8x8 meters

This construction method is usually used for a square cottage, only larger than a 6x6 building. In both cases, the most optimal solution is to build a house so that the stove is in the very center of the structure. With this layout, you can count on the fact that the stove will be able to evenly warm up all the rooms adjacent to it. The most important thing in houses with a large area is not to put the stove next to the wall, as this will lead to the release of heat towards the street, and not towards the living rooms. This is a great house project with a Russian stove with a stove bench.

9x12 meters

The layout of the house with a Russian stove 9 × 12 meters. This type of building can include, for example, a covered and insulated terrace. In the example below, without taking it into account, the area of ​​the house turns into a standard square, only with sides of 9x9 meters. In this case, you can simply go in the same way as in other square houses, since terraces are usually not used as living quarters, but serve as a pleasant pastime in the summer.

Features of designing houses with stove heating

Central location

As already mentioned, one of the most viable options for installing a stove in a home that does not use a water circuit for heating is a central location. The most common way is to make the stove become a single point for all adjacent rooms. In such cases, the hearth is installed in the partition between the rooms, and the firebox is brought out either to the kitchen or to the corridor.

Multiple heat sources

Another option that those who want to get a house with stove heating are offered to use is the creation of several sources of heat. The disadvantage of the idea is that each of them will need to be heated separately and, accordingly, spend more fuel to heat the premises. Centralized placement of the stove solves the problem much more efficiently.

Swords size

Another nuance that is not taken into account by many customers who want to build their home with stove heating is the size of the stove. A common misconception is that the larger the oven, the more heat you can get from it, and the more efficient it will be. On the one hand, this is indeed the case. However, one must understand that the larger the stove, the more difficult it will be to heat it to the required temperature. At the same time, it will spend much more fuel than a small one.

The best way out in this situation is to build a small oven, but of a design that will allow you to keep heat longer and lose it less. Then heating will be more budgetary.

Two-storey house

If you have to deal with a two-story house where stove heating is used, then a different approach is applied here. A special stove system is installed, when the lower part has all the necessary attributes - a stove bench, a hob and an oven - and only a heating shield is used on the second floor. For such a house, very strong materials and an accurate calculation are needed so that the brick structure on the second floor does not lead to damage to the house.

In some designs, the oven can be made so that only the part suitable for cooking is used. In this case, heating is not performed, which is very convenient in the warm season.

Let's summarize

Building stove-heated houses can be more profitable compared to other heating methods for a country house. However, it is possible to build housing with such a system only with the help of a specialist who will design a convenient and functional layout of the premises and will be able to take into account the main features of this heating method.

← Previous article Next article →
















You can't just go and build a house. It is important to carefully plan each stage of its construction and the cost of all materials. Even before choosing a project plan, you need to figure out what kind of heating will be. The main thing is that the heating runs quickly and evenly. Of course, the house should only be equipped with an economical option that will save money in the cold season. In addition to solutions with traditional gas or electric heating, there is a project for a house with a stove.

Source sr.aviarydecor.com

Modern Russian brick ovens

A stove is a time-tested way to heat your home. The modern Russian stove has undergone some qualitative changes. The material and shape of the structure have changed. Despite the modernization, it does its job well. It is still possible to heat a small room thanks to the correct installation and carefully planned construction site. Modern bricks are able to withstand high temperatures and store heat. As a result, even if the flame goes out, the walls will give off heat for some time, which will make it possible to save a little.

Source stroisovet.com

The transition to a new kind of comfort maintenance is quite difficult and requires a lot of effort. Before deciding on the final result, it is important to weigh the pros and cons well. It is necessary to understand how difficult it can be to erect a structure and what problems may arise during operation. It is important to study in detail all the pros and cons that are associated with stove heating. It will not hurt to disassemble several projects of houses in which this type of autonomous heating is implemented. This is the only way to choose the ideal option with a good price-quality ratio.

Varieties of Russian stoves

Almost all designs have a similar principle, but some differences still stand out. The following types of heat source can be installed in the house:

  1. With stove and built-in drain. Plates can be mounted in the base of the structure; in the classic form, they are made in the form of a dead space.
  2. With built-in fireplace. Such a stove can be arranged in the living room or in the hall, because it is always pleasant to look at a burning fire.
  3. With a trestle bed (place to rest). Such a stove is equipped with a separate place for rest and sleep, as it was in the old Russian models. A constantly warm bed is the best medicine for aching joints. That is why in ancient Russia it was customary to give up a warm rookery to sick and elderly people.
  4. With a hob. An irreplaceable thing in any country house. Such a device provides a comfortable home climate and a place for preparing food.

Source oooarsenal.ru

Advantages of stove heating

The main advantage of this type of heating is its autonomy. Now there is no need to depend on the central heating system with its planned shutdowns, breakdowns and insufficient heat. It is solid fuel heaters that are in great demand in the modern market. Unfortunately, the current reality is that it is impossible to heat normally with electricity or gas. Electricity bills are so high that residents with electric heating systems give up comfortable living and start saving. If we talk about gas, then not all residential buildings have a gas pipeline.

Source dom-steny.ru

Saving

In Russia, it was allowed to collect dry forests, so it's time to buy solid fuel heating systems. The stove will be able to work on almost any combustible material - this is a weighty argument in favor of the construction plan, especially given the difficult financial situation. Coal, wood, dry branches, cardboard and even fuel oil are quite suitable for the firebox. It all depends on your imagination and financial capabilities. The main thing to know is that certain materials can cause inconvenience in the form of an unpleasant odor and traces of soot.

Source sanigrif.es

You can control the heating mode yourself. Modern systems allow you to adjust the indoor temperature. Thus, you can start saving by lowering the overall degree, or turn on the spark and feel comfortable. Some modifications have a bed that can be heated. So, you can provide good prevention of certain diseases.

On our website you can find contacts of construction companies that offer the service of building fireplaces and stoves. You can communicate directly with representatives by visiting the Low-Rise Country exhibition of houses.

Interior addition

A classic oven can be a great design solution. Now the classics and open fire are in trend. All this is present in the Russian stove. In addition, it will well emphasize the style of a wooden house from a bar. A warm atmosphere of home comfort is created. It is pleasant to be in such a room, as you feel the safety of the family hearth.

The stove can become a real decoration of the interior. Source lt.aviarydecor.com

But, despite all the advantages, the layout of a village house with stove heating has its drawbacks. In order to understand whether life will be comfortable, it is important to study them properly.

Disadvantages of stove heating

When installing stove heating, you will face the following difficulties:

  1. Small soot may collect inside the house. A similar effect will be with improper use of the chimney device or low-quality fuel.
  2. If the damper is used incorrectly, there is a risk of carbon monoxide poisoning. The poisonous gas replaces oxygen, and the person simply suffocates. This condition has no symptoms other than fatigue and drowsiness.
  3. Stove heating implies an open fire, which is very dangerous, especially for a wooden house from a bar. One small spark is enough - and a fire is inevitable.
  4. Structural elements have hot parts, which are very easy to burn. Everyone, especially young children, is at risk.
  5. From active use, the chimney will become clogged with soot, which needs to be cleaned. If the chimney is clogged, then all the soot and soot will settle on furniture and walls, which are then very difficult to clean.
  6. It is necessary to constantly clean the grates to suck in combustion air. During cleaning, usually the entire surrounding surface is covered with a small layer of ash - and unscheduled cleaning becomes inevitable.

Source ukrmarket.net

Layout of houses with a stove

A new house project with stove heating always involves tough decisions. Before considering a specific construction plan, it is necessary not only to determine the size of the total area, but also to consider the number and convenient location of living rooms. In addition, it does not hurt to decide on the material from which the future home will be made.

Compact one-room house

The building consists of one living room of 15 squares. In the middle there is a stove, next to which there is a kitchen with an area of ​​8 m 2. The last heated room is a bathroom. There is a veranda in front of the house.

House project with a Russian stove Source v-teplo.ru

Advantages

  1. Small rooms heats up quickly.
  2. A small amount of fuel is required.
  3. It is easy to keep the whole house clean and healthy.
  4. There is a veranda where you can relax in the summer.

Source pinterest.com

disadvantages

  1. Poorly suitable for a family of three or more.
  2. The veranda is not heated, which means it is not used in winter.

Two-room wooden house

This plan includes two living rooms, bathrooms and a terrace. The house has the shape of a square with a side of 9 m. The stove is installed in such a way that all rooms are heated. This project uses wood as the base for the walls, ceiling and floor. The wooden structure does not allow cold to pass through and retains heat well.

Source a-bishop.spb.ru

Advantages

  1. The project includes a drying rack in the hallway and a warm bed in the bedroom.
  2. The laid out Russian stove effectively accumulates heat and slowly releases it. Paired with the thermal insulation properties of wood, an economical heating option is obtained.
  3. A dryer in the hallway is useful during the winter season. It allows you to dry your clothes and shoes and also helps keep the whole house warm.
  4. The oven has a stove on which you can cook. In the summer, it is possible not to operate the entire system, using only the stove.

Source sdelaipotolok.com

disadvantages

  1. There is still little space.
  2. There is no separate living room or kitchen.

Three-room layout of the building

A more serious project that is designed for a large family. And although the house is large, the correct location of the heat source can equally warm every room. Two bedrooms and a living room have hot wall access. The only unheated places are a pantry and a bathroom. As in the previous case, the kitchen is combined with the hall.

Layout of a three-room house with a stove Source apartments.com

Advantages

  1. Plenty of free space, there are separate bedrooms. One can be equipped as a children's room.
  2. Competent distribution of work space, no empty useless rooms or outbuildings.
  3. The corridor is combined with the kitchen, which means that light will penetrate there well. In addition, this approach visually increases the volume of the room.
  4. The pantry has no windows and no active heating, which means it is perfect for storing food. It can serve as a cellar.

Design project of a modern kitchen-living room with a stove Source svoimy-rukami.ru

disadvantages

  1. The bathroom is not heated. A cold bathroom or toilet can be uncomfortable.
  2. The corridor does not close, which means that some of the heat from the kitchen will go through the front door.

These are the main projects, variations of which usually include a catalog of winter houses with a Russian stove. These buildings have their pros and cons. You need to choose the right option for yourself. If the building meets the necessary requirements, life in it will become quite comfortable and economical.

Video description

Read more about placing the stove in the house - in this video:

Basic rules of operation

The oven is a complex mechanism that requires special care. Open fire is a great danger, especially for wooden buildings. It is proper care and adherence to safety rules that guarantee a safe and comfortable life.

Security

The first and basic rule is not to leave an open fire unattended. Before leaving, it is important to make sure that absolutely all the embers are extinguished, and there is not a single spark around. Negligence and inept operation of the stove is the main cause of fires. If everything is properly arranged, then the risk of an unwanted fire is practically excluded. The second and no less important condition is to keep children away from the system. No matter how smart the child is, he is incapable of giving a full account. It is important not to leave children alone with a hot stove.

The project of a house with a Russian stove will appeal to all family members Source tunnel.ru

For safety, it is necessary to upholster the floor in the place of possible fire hit with non-combustible material. Usually, a sheet of thin metal or tile is used for such purposes. It also does not hurt to put a screen or a protective screen to trap dangerous hot chips and coals.

Service

The elements of the heating system must always be in good condition. For long-term work without complications and breakdowns, it is important to carry out regular diagnostics and prevention. This work includes cleaning the chimney from ash and cleaning ash from the grate. Before each heating season, it is important to inspect all elements and, if there are any faults, try to eliminate them.

Source kaznews.kz

Conclusion

The embodiment of such a serious decision, which is the construction of your own home, requires a lot of time and effort. Unfortunately, some today do not have the opportunity to follow even the creation of a project, and there is no longer any question of construction. Therefore, you should pay attention to houses with turnkey stove heating. Such a construction includes fully autonomous work at all stages of construction. You will be disturbed when the house is completely ready and all you need to do is move in.

Ordering projects of houses with turnkey stove heating is an ideal option for obtaining safe, well-thought-out housing Source kelohouse.ru

Conclusion

In addition, the construction of a separate building is a rather difficult task that requires additional skills and construction experience. High qualifications are especially needed in building planning for even heat distribution. In the old days, special people were hired to build a Russian stove, who accurately determined the area of ​​the building and built a heating system directly in the center of the hut. Today, for these purposes, they use the services of a special design department.

Rating: 1 726

Many people living in cities are tired of the constant noise of vehicles outside the window, the buzzing of the factory, noisy enterprises (for example, restaurants) work, so they want to settle at least for a short time somewhere far outside the city, or at least live in the country. And so we will consider what projects there are for houses with stove heating from brickwork.

However, there are a lot of amenities in apartment buildings, and residents want to see them in their own private house, because it is quite possible to live in their own house and enjoy the benefits of civilization if projects of houses with stove heating are made. They are most comfortable if there is no gas nearby.

Advantages of stove heating

In principle, a house can be built completely from any material. Such, for example, as brick, wood, stone. Many heating systems do not have such advantages as a stove. In addition, what to do if the gas pipeline is like the Moon, and the electricity will be supplied only next autumn? Is it possible to sit without warmth and freeze in your own house?

Consider the advantages of a stove heating system with a specific example. Let's say that our private house is made of stone. Then heating with a stove will be very productive, and all because the stone has one very interesting property - it can accumulate heat. To heat a house with a stove, it is enough to purchase any solid fuel. It can be either cardboard. If there is a forest nearby, then you can go and bring some branches. And if there are logging organizations nearby - firewood. You should not, however, stuff anything your heart desires into the stove.

Another plus of heating with a stove is that you do not need to wait until they finally bring it, because you can safely heat it with another type of fuel. It is recommended to come up with a fuel storage room in advance and stock up on various. Then the stove will give out heat without interruption. Also, in the work of electricity, there are constantly various failures, or even emergencies. But this will not affect the oven in any way.

The stove works quietly by itself in stand-alone mode. In this case, it is possible to install the stove heating system as the main element, as well as as an additional one.

For example, in a private house there is already some kind of heating system, but it is quite possible to install a stove as well. After all, she creates coziness, gives comfort and warmth.

Imagine: winter, snow outside, severe cold, and the whole family is going to have dinner together by the warm stove. There is also a fire that calms, relaxes. You can sit near it with your loved one, with your pet. Surely someone saw pictures of people sitting in an armchair near the stove with a dog or cat. Many people do not like wood-burning stoves, but they still stand in private houses and, for sure, will stand for more than a decade.

Initially, it is necessary to make projects of houses with stove heating from brickwork. The furnace design plan must be on paper, that is, drawn up. It should indicate all the required norms, necessary rules and various nuances. It turns out, as it were, an instruction that may be quite useful in the future.

The house may have more than one floor, then you should definitely allocate a small room in it for the boiler room.

In the case when the stove is made of such a building material as stone, then its maximum temperature cannot be more than 120 degrees. If it is made of metal, then in this case the temperature will be much higher.

Brick stoves

With the help of a furnace, it will have a certain area. In order to calculate it, it is necessary to find out initially such important nuances: how many windows, doors are in the house, what is the material of the walls, how the house is insulated, the area of ​​this house. At the same time, it is taken into account that a building area equal to one square meter can heat 35 square meters of a house. However, this takes into account the temperature outside the window at minus 25 degrees.

In the case of installing a coil, you need to invite a master. In this case, the coil must be made of sheet steel. Or metal can be used in pipes 5 millimeters thick. The coil provides the maximum room temperature under specific conditions.

Brick oven masonry scheme

Some people say: let the stove be somewhere in the hallway or even in the kitchen. She should not interfere with the passage, and there is no need for her to catch the eye once again. However, this is not the most important criterion for choosing the right place for installing the stove. The rules for the construction of stoves say that it should stand somewhere in the center of the room, while the firebox goes somewhere to the kitchen or to the veranda, and the hob should also go there. Part of the stove, made of stone, goes into the bedroom or hall.

Professionals say that a stove, as a rule, can heat two rooms if they are located next to each other. If the house is very large, it has many floors, then the stove will most likely need not one, but two or even three. There is the following designation - a heated circuit. It is used by professional stove-makers for laying stoves and installing all kinds of heaters, such as, for example, a Russian stove or a fireplace.

Furnace heating project

The main thing is to choose the right plan from all projects of houses with stove heating.

Then, if desired, even a two-story house can be heated. At the same time, the stove heating system can be organized in such a way that people will live on the second floor only in warm weather. If the oven needs to be repaired, or if there are any problems with it, it is best to immediately call a specialist. When replacing a gas burner, you also need to call a professional.

Requires very cheap fuels. It is quite possible to do it yourself, but before that you need to read everything that is possible for this project. The stove is very efficient and can beautify absolutely any interior.

In addition to the fact that the stove heats the room, you can cook delicious food in it. Therefore, they put a Russian stove on which there are beds, and it is very convenient to lie on them. It is worth considering that if you carry gas into the house, then you need to obtain a permit. In this case, a boiler for liquid fuel will require the use of a container in which diesel fuel will be placed, and the volume of such a container should be about three tons. Imagine that you have a small house in the country.

Why such waste? Well, maybe only if several people constantly live there, but this is completely useless. The stove warms up the air well, heat is transferred from it to the floors and walls. It is not recommended to make a stove of metal, it does not collect heat, and when the firebox is not working, the stove will cool down quickly.

Your contacts in this article are from 500 rubles per month. Other mutually beneficial cooperation options are possible. Write to us at [email protected]

    What was done

    Project: the Innsbruck project was adapted to the site and the wishes of the customer's family, a solution was proposed to move the terrace.
    foundation: based on geology and the architect's calculations, the house was erected on a pile-grillage foundation.
    floors: basement - solid concrete; interfloor - reinforced concrete floor slabs.
    box: walls made of aerated concrete blocks, laying on masonry glue. Windows are made to order, with one-sided lamination, on-site installation.
    roof: metal tiles.
    exterior decoration: walls are insulated with basalt facade insulation and plastered, finishing elements are made of wood, made on site, based on TZ-visualization, painted. The plinth is lined with decorative stone.
    interior finishing: finishing was carried out according to the design project, where the combination of decorative plaster with stone and wood was taken as a basis. False beams were installed on the ceilings.
    additionally: a fireplace is installed and finished.

    What was done

    The very case when our Customer and we speak the same language and are inspired by the ECO high-tech style! Designer Ilya came to us with a ready-made Design of his future home! Our team liked the project - after all, such unusual and stylish solutions are always a professional challenge!
    We prepared estimates for Ilya and developed unique design solutions - all this allowed us to implement this project! The frame house is made in our proven Canadian technology with 200 mm insulation along the entire contour! Outside, the house is sheathed with imitation timber. All windows are custom-made and laminated in the colors of the project. Additional accents are highlighted by the professional timber imitation dyeing and color matching.

    What was done

    What does it cost us to build a house? Indeed, having a team of professionals and knowledge - building a house from scratch is a matter of time! But sometimes the task is more difficult! We have introductory - an already existing foundation, or buildings on the site, extensions to existing buildings and much more! For the Matsuev family, it was just such a difficult task. They had a foundation from an old burnt-out house, and a landscaped area around it! The new house had to be built in a short time on the existing foundation. Dmitry and his family had a desire to build a new high-tech house. After careful measurements, a project was made that took into account the old layout, but had a new modern shape with interesting innovations! The house now has an entrance group where you can sit at a table on cozy evenings and a complex but possible exploited roof in our lane. For the implementation of such a roof, we called on our knowledge and modern building materials for LVL beams, welded roofing and much more. Now in the summer on such a roof you can arrange an unusual dinner or watch the stars at night! In the decoration, our architect also emphasized the minimalist and graphic high-tech style. Smooth plastered walls with painted planken details, wood beams at the entrance added personality. Inside, the house is finished with imitation timber, which is painted in different colors depending on the purpose of the room! Large windows in the kitchen of the living room overlooking the plot - created the desired effect of illumination and airiness of the space! The house of the Matsuev family - decorated our photo gallery in the section of suburban architecture in the high-tech style, in the style chosen by courageous Customers with excellent taste.

    What was done

    Olga and her family have long dreamed of a country house! A reliable, solid home for life, which will perfectly fit into their difficult narrow area! With the advent of children, it was decided to make the dream come true, children grow up quickly and in their own home in nature there are many opportunities and fresh air. We, in turn, were happy to work on an individual project of a classic-style red brick house with a bay window! After the first acquaintance with our company in a cozy office, we invited Olga to take a look at our existing construction site: evaluate the order and construction processes, storage of materials on the site, get acquainted with the construction team, and make sure of the quality of the work. After visiting the facility, Olga decided to work with us! And we were glad to do our favorite job again to make another country dream come true!

    What was done

    Project: changes were made to the San Rafael project and redevelopment was made according to the wishes of the Customer.
    floors: basement -zhb floor slabs; interfloor - reinforced concrete floor slabs
    box: walls made of expanded clay concrete blocks, laying on mortar ??? Windows inserted.
    roof: metal tiles
    terrace: rough enclosing elements are made, flooring is made.

    What was done

    Dmitry contacted our company with an interesting draft design to calculate the cost. Our experience allows us to carry out such calculations for draft designs with minimal errors, no more than 2%. Having visited our construction sites and received the construction cost, Dmitry chose us from many of our colleagues in the workshop to complete the project. Our team has embarked on a challenging and expressive countryside project with spacious rooms and a garage, large windows and sophisticated architecture. After the project was completed, Dmitry chose us as a contractor company, and we, in turn, wanted to do further work at the same high level! Since the object is large, Dmitry proposed a phased cooperation, namely, upon successful completion of the foundation work, we proceeded to the second part of the project - walls + ceilings + roof. Also, for Dmitry, the exact timing of construction was important, in order to speed up the construction processes, the team was strengthened by 2 experienced bricklayers.
    The box on the pile-grillage foundation was delivered on time! The result pleased us and the customer. All stages of the work were coordinated and worked out for Dmitry and his individual project, from which all participants in the process benefited!

    What was done

    Project: The project of our company Inkerman, was changed taking into account the wishes of the customer's family, the house was planted on the site, taking into account the existing situation on the site and the relief
    foundation: based on geology and the architect's calculations, the house was erected on a reinforced pile-grillage foundation.
    floors: wooden on wooden beams, in places of large spans, installation of LVL beams. The basement floor is insulated with 200mm basalt insulation; interfloor overlap with noise insulation 150mm.
    box: box: walls made of expanded clay concrete blocks, laying on mortar. Windows inserted.
    roof: installation of metal tiles.
    exterior finish: the facade is insulated with 100 mm basalt facade slabs, the facades are covered with facing bricks; the color scheme was proposed by the architect and agreed with the customer.

    What was done

    The Krutov family decided to build a spacious house for the whole family!
    Olga and other family members went from idea to implementation in several stages! The choice of technology, long work on the project, construction of the foundation, construction of a house with exterior decoration and then work on interior decoration! The frame technology has been chosen as energy-saving, pre-fabricated and high-tech! Why did the Krutovs choose our company? They liked the quality of work on our construction site and the workers who gave a detailed tour! We also worked on the estimate for a long time, combining different options for finishes, comparing their cost. This made it possible to choose the best option from a wide variety of finishing materials and configurations.
    The project was created by a friend of the architect, but we had to work out the constructive part of it. After that, the most reliable and effective foundation was erected - the USP. Next, work began on the box. A frame house with 200 mm insulation along the entire contour and a unique roof insulation technology of 300 mm. For the exterior, siding was chosen in a spectacular combination of colors - coffee and cream. The accents are highlighted by the powerful overhangs, the interfloor belt and large windows!

    What was done

    When you decide to become the happy owner of your own home and move to a new home for permanent residence, first of all you think about what the house will be like; what to build it from; how much will it cost and, most importantly, WHO will do all this?
    Alexander, came to our company with the desire to move to his own country house. He liked the Avignon project and there was already a strip foundation on the site. After the initial visit to the site, measurements and examination of the foundation, we gave our conclusions and recommendations. Strengthen the foundation, change and adapt the project to the dimensions of the existing foundation! After agreeing on the cost, it was decided to build in winter. Alexander received as a gift reinforced concrete floors, one of the leading construction teams and a house according to the project he liked, which stood on a site with an external finish by the spring! Alexander watched every stage of construction, regularly visiting the construction site and was pleased with the result, and we were with our work. This is an individually designed Avignon project, realized in stone technology with external insulation and siding!

    What was done

    Each house is a separate story of creation and implementation! Once we built a house for good people and they recommended us to another good person! Andrey Rumyantsev came to our company with a desire to build a one-story spacious country house with a fireplace for warm family evenings instead of an old country house ... It was decided to build the house from aerated concrete blocks so that the future handsome country man would delight the owner for decades! The customer voiced his wishes for finishing - and we, in turn, made everything come true. Thanks to the detailed visualization of the project, each element of the exterior finish is a member of a friendly ensemble! Bavarian masonry, as the final stage of exterior decoration, looks noble and solid. Without a doubt, such a tandem - aerated concrete and brick can be safely called the best solution in the field of stone housing construction - warm, affordable, beautiful, reliable. Modern technologies have stepped forward so much that such unique configurations become available in a short time, because we built this project during the winter months. The main thing is to have the necessary knowledge and constantly replenish their stock!

    What was done

    Project: the project of a European company was taken as a basis and was adapted to the site and the wishes of the Customer's family, a terrace and patio were proposed, taking into account the cardinal points of the Customer's site.
    foundation: on the basis of geology and the architect's calculations, the house was erected on a pile foundation.
    floors: basement - solid concrete; interfloor - wooden on beams with 150 mm soundproofing device.
    box: walls made of aerated concrete blocks, laying on masonry glue. Windows are custom made with one-sided lamination, on-site assembly.
    roof: metal tiles.
    exterior finish: walls are insulated with basalt facade insulation and plastered. Based on the visualization, the facade panels under the Tolento stone have been added. The enclosing elements of the terrace, balcony are made of wood, made on site, based on the TK-visualization, painted. Roof overhangs are lined with soffits in the color of the roof.

    Vladimir Murashkin,

    The owner of the house "brought to life according to his idea and sketch!"

    House parameters:

    What was done

    When Customers come to us with bright, modern ideas for the future home, we light up twice! After all, it is always interesting to work on a new stylish project and a kind of challenge, how to implement all bold ideas from a constructive point of view, what materials to use in this case? Vladimir bought a plot with picturesque views of the Oka River! This view could not be ignored, so a dizzying terrace (51.1 m2) and a large balcony, oriented towards beauty, became an indispensable attribute of the future house! Vladimir wanted to have a rest in nature in a wooden house, but it was necessary to build a house in a short time and frame construction technology became an ideal solution for such tasks! If you are to be different, then in everything! The house was made even more spectacular by a vertical finish imitating a timber made of durable larch, painted in natural shades with an emphasized wood texture. Complementing the modern look of the house - laminated windows! It turned out to be a great country house, with a twist and at the same time incredibly functional.

    It all started with an individual project found by the Customer's family on a European website. It was with him that she first came to our office. We made preliminary calculations for the project, took a tour of the existing construction site, shook hands and the work began to boil! The architect improved and adapted the project for the site and the customer's family; the foreman "planted" the house on the site. On the fact of geological surveys, it was decided to put the house on bored piles. The frame has grown in a few weeks, then the roof, insulation, exterior decoration! During the winter period, a house has grown on the site. The customer invited a third-party technical supervision, who monitored the process independently of our multi-stage control. The color of the color scheme for painting the imitation of a bar was selected by our manager and here we have a bright and cozy country house of the Pushkov family's dreams!