Do-it-yourself children's garden swing. Children's swing for giving with their own hands: photos, diagrams, useful tips

A solid wooden swing suitable for the general style of the landscape at the summer cottage is a joy for children and adults. Purchased publicly available models usually do not differ in quality and variety. It is much more interesting and useful to approach the process on your own and make a summer cottage swing, giving your site a unique flavor. After all, there is nothing particularly complicated in this.

Wooden swings are classified into three main types:

• • frame, standing on stationary supports (classic version);

Frame swing

• • suspended on ropes or cables, such as "bungee";

Hanging swing, "bungee"

• swing - "scales" or balancing. This type of swing is for two.

Any model is played in such a way that all neighbors will envy, and households will choose their favorite corner of the garden or yard.

Where to locate?

If the choice is made in favor of the classic "bungee", we hang on the nearest tree that inspires confidence in terms of strength. When choosing a place for other types of structures, it is reasonable to take into account the following factors:

• sufficient distance from walls, fences, trees, wires, thorny bushes and pointed objects;
• illumination. It is advisable that the sun hits the site until the evening. So the wooden material is insured against dampness;
• it is better to immediately pick up the surface relief so that you do not have to carry out additional work;
• the place should not be “blown by all winds”. Drafts are fraught with quick colds.

It is good if there is sand or soft lawn under the swing. This will help prevent serious injury from the stone or reinforcement in the event of a fall.

Drawing

You can do without it. But if a serious project is conceived with a claim to a long-term service, then it is better to prepare a swing drawing for reasons of economy of material. Designing a homemade swing is not difficult.

General provisions that reflect the drawings of a garden swing from a log:

• frame structure;
• sizes. For a swing, this is the height and area of ​​the base;
• the places of fasteners and reinforcing elements must be marked;
• the number of seats and their type;
• the length of the suspensions and their appearance.

An example of a drawing of a wooden swing

Material selection

It is important to focus on the quality of the material from which the swing will be made. High-quality wood will not only ensure the durability of the structure, but also guarantee the safety of use.

Species such as cedar, oak and larch will not disappoint. Spruce, pine and birch are also quite strong.

The lumber must be selected dry, without traces of mold or foci of decay. There should be no knots falling out, crevices, holes made by pests. A large volume is not required on a wooden swing, so you can check every board and beam.

Instruments

To make a wooden swing you will need:

Strong branch on

• mix for concrete mortar;
• nails, screws, bolts, corners (in accordance with the project);
• tape measure and plumb line;
• hacksaw;
• hammer;
• antiseptic for processing wooden parts;
• grinder (or drill with attachment);
• screwdriver.

This is the main arsenal. When everything is ready (material, drawings and tools), we begin to make a garden swing from logs.

Wooden swing care

1. Annual processing with a special composition or painting will save the product from decay and pests.
2. From the end to the beginning of the season, it is necessary to cover the swing with waterproof material.
3. Avoid the appearance of rust on metal parts.
4. Do not give disproportionate loads.

Such a swing will delight more than one generation, provided that these simple and clear rules are followed.

And if they fit better into the design of your garden, then it will be more difficult to make them. But they will last you longer.

(18 estimates, average: 4,00 out of 5)

Kindergarten swing in the country Is a casual game, great leisure and fun. There is always a lot of children's laughter and joy around them. By installing them in your summer cottage, you can get another place for a pleasant time. Observing the simple rules for creating a structure and safety, you can make a children's swing for a summer residence with your own hands.

To get it right calculate the possibilities and strength, you must first determine the preferences of family members and get acquainted with the manufacturing options (photos and drawings of a swing for a garden can help in this). Some people prefer to languidly lie with a book or a tablet, while others need to swing with a whistle in their ears.

Types of homemade swings

Garden swing are divided into several main groups:

• balancing or sofa swing for giving. This type of swing is for two;
• hanging swings on chains, ropes or ropes, like a "bungee";
• swing from logs, which are on stationary supports (classic view).

Each model can be beat in this way that household members will choose her as their favorite corner of the garden or summer cottage, and all the neighbors will begin to envy.

Where to install?

When the choice made in favor of "bungee", then the answer to the question is obvious - we install it on the nearest tree, which inspires confidence in terms of strength. And when choosing a place for other types of swing for a summer residence, it is necessary to take into account the following factors:

• illumination. The best thing, so that the sun's rays got to the site until the evening. Thus, a garden swing made of wood will be insured against dampness;
• sufficient distance from fences, walls, wires, trees, pointed objects and thorny bushes;
• the site should not " be blown by all the winds". Constant drafts are fraught with colds;
• it is advisable to immediately choose a smooth surface relief so that there is no need to perform additional work.

It's great when there is soft lawn or sand... This will make it possible to avoid injury from reinforcement or stone during the fall.

Gallery: DIY garden swing (25 photos)

Drawings of a swing for a summer residence

You can do without them... However, when a serious project is meant with a claim for long-term operation, then, for reasons of economy of building materials, it is advisable to prepare a swing drawing ... Design a wooden swing with your own hands it will not be difficult when there is at least insignificant experience of such work.

General provisions that display drawings of a kindergarten wooden swing:

• sizes. That is, base area and height;
• frame structure;
• type of suspensions and their length;
• number and type of seats;
• it is necessary to mark the places of reinforcing elements and fastenings.

Material for making

Whichever type of swing is chosen, it is necessary sharpen a lot of attention on the quality of the material (directly on the tree) from which the structure will be built. A high-quality tree will not only be able to ensure the durability of the structure, but, most importantly, guarantee the safety of operation.

The following species have shown themselves excellently: larch, oak and cedar. Also, wooden swings are often made of birch, pine and spruce.

Wood must be purchased dry, without foci of decay or traces of mold. There should be no holes made by pests, crevices, knots falling out. The construction of a swing with your own hands from a tree does not require a large volume, therefore you can check each beam and board.

Instruments

Before making a swing in the country with your own hands, you need to make sure that you have all the tools required for this.

You will need:

it basic tools... When everything is prepared (project, drawings and material), we begin to build a garden swing in the country with our own hands.

In this case, the main difficulty is what to hang on to. When you have a suitable tree, it is advisable to make the crossbar from a log (about 25 cm in diameter and 3 meters long), fixing it with ropes. A strong branch at the required height will eliminate the need for this design... When not at the dacha there is a suitable tree, then, in addition to the supporting beam, you will also need two logs (30-40 mm in diameter) to assemble the U-shaped frame.

Pre-logs you need antiseptic and grind, then they are placed in the prepared pits (50 cm) with rubble at the bottom and filled with cement mortar. When cementing is not planned, the logs will need to be dug to a depth of at least one meter.

During the installation of the frame, the most important thing is to avoid skewing. There is an interesting option to adjust the level correctly: the Egyptian plumb line. D This system is quite is simple: the upper weight is a nut or any curved piece of iron, and the lower weight is a small container with sand.

As for seating, there are many variations to suit every budget and taste:

• from a board (with or without a back, on two suspensions or on one central one);
• from a log (of one thick diameter or 2-3 thin ones, which are connected to each other with fasteners or a rope);
• from the tire (solid or cut, horizontal or vertical arrangement).

To the choice of material for suspension, with the help of which we will hang the bungee on the mount, you must take responsibility. Ropes, ropes or ropes must be reliable, preferably new, and not rotted from the attic stores. It is not recommended to use chains in this case, as the child can easily pinch his fingers in them.

Hangers during attachment on the supporting beam must be no closer than 1.5 m from each other. You can secure them with leather-wrapped loops or hooks. You can also use special steel fasteners - thimbles. The most durable fastener is a carabiner with a collar. However, the carabiner must have safety teeth, otherwise, during strong swinging, it may shift.

Usually , frame swing for giving have a fixed solid base, for example, a sofa or bench. This is a more permanent structure, in contrast to rope structures. Most often, this structure is installed not only for children, but also perfect for relaxing with the whole family. Construction options will depend from the selected material.

Log swing

Today, a swing made of logs is quite relevant. Though they look bulky, but reliable and original. The seat can be hung on L-shaped, U-shaped and X- or A-shaped frames.

At the same time, X-shaped frames are the easiest to make: a load-bearing beam is placed on top of the logs (about 12-15 cm in diameter and 2.5-2.8 m long) fixed with a "cross". The cross starts about 45-60 cm from the ends of the logs. Threaded spokes (15 mm) are best suited for fixing, which are secured with nuts on both sides after installation.

The lower ends of the supports are cut inward at an angle of 45 degrees. After that, on each cross, it is necessary to fix screeds in the form of small-thickness bars measuring 2-2.5 m at a level of 35-50 cm from the lower ends.

We install both crosspieces and fasten the third tightening log between them at the same height as the first two, and also fix the supporting beam in the upper grooves. The swing frame is assembled from logs. Now you just need to hang the sofa or put together a bench. The simplest seat can be easily built on a frame made of 6x8 cm timber, which is then sheathed with a 4 cm thick board. The parameters of the sofa bench are as follows:

• back height 70 cm;
• bench depth 60 cm;
• length 180 cm.

Strong ropes, cables, ropes, chains can be used as suspensions. They are fixed to the bench with carabiners or knots. But for attachment to the crossbeam, two eye nuts and two large bolts will be needed.

Stages of installation of suspensions:

• In the places where the suspensions are fastened in the supporting beam, two holes are made through and through from top to bottom.
• Bolts are inserted here, eye nuts are screwed in at the bottom.
• Carabiners or ropes are inserted into the rings of the eye nuts.

Near the large bench, as a combined version, you can attach a single bungee for children to a long supporting beam.

This is a rather convenient material for assembly, therefore, it is not very difficult to build a wooden swing from a bar in the garden with your own hands, however, the skill will not hurt.

To assemble a swing from a bar with your own hands, the following material will be needed:

• for tightening the crosses, one edged board 4x12x70 cm;
• for the crossbar, one bar 10x10 cm long 2.7 m;
• for side supports, four 12x12 cm bars, 3.2 m long;
• for a bench: approximately 15 linear meters of a bar measuring 4.6x5.5 cm, for sheathing 20 linear meters of a board 2.5x4.5 cm, as well as fasteners and hangers.

First of all, we collect the crosspieces. This is done in the same order as for a wooden garden swing made of logs: mark, cut, connect, hang a chair or bench.

On a swing from a bar, the lathing of the crosses of their thin slats looks great, where you can attach a pots with flowers. A light roof would also be quite appropriate. A very interesting option is when the roof is made as a "house", as above the wells in the village. If you use your imagination to the maximum, then this "harbor" in the garden will become a favorite place for family vacations. Especially with soft cushions on the bench.

Wooden pallet

Probably, many could see lattice wooden stands for various goods in warehouses and shops. Often, after the delivery of goods, they remain in the suburban areas. However, the idea to build a garden swing out of it with your own hands can only come to mind for a person with remarkable imagination. The most important thing is that the pallet is not rotten and strong. It must be immediately treated with water-repellent and antimicrobial compounds, painted and dried.

So, here's another idea of ​​how to make a garden swing for a summer residence with your own hands, very quickly. Rope, rope, rope or chain are fixed on 4 sides of the pallet and hung on any frame or support. Thus, you can make either a luxurious seat on which two children can comfortably sit and swing together from both sides. Or, putting a pillow and a mattress on it, we get almost a cradle.

When the farm has two pallets, then, by securing them with corners, you can build a bench that will look great on any frame basis.

Balancer or swing scales

Once upon a time, this kind of entertainment for two was an obligatory attribute on playgrounds. On which not only children, but also romantic older people willingly rode. In the garden, these swings will certainly be in place.

When everything is relatively clear with suspended structures, then how to make a wooden balancing swing for a summer residence with your own hands? These swings can be made from planks, bars and logs.

For the simplest classic version, you will need:

• metal or wooden pin;
• a piece of a thick saw cut or log;
• two handles;
• two beams measuring 30x30 cm;
• a board not less than 4 cm thick and about 2.5 m long.

So, the construction process is pretty simple:

• We lay the log on one side.
• We fasten it on the sides with beams so that it does not roll on the ground.
• Having found the center, we fasten the pin.
• We put a board with fixed handles on the pin.

And now another garden wooden swing is ready.

How to care for a wooden swing?

• From the end to the beginning of the new season, you need to cover the structures with waterproof material.
• Annual painting or treatment with special compounds will save the swing from pests and decay.
• Do not create disproportionate loads.
• Avoid rusting on metal parts.

A wooden garden swing is a great way to relax in the country. It is all the more pleasant if they are made by hand. Their construction does not take a lot of time, but you can enjoy the result literally every day!

It so happened that for many of us, a swing is associated with childhood or a wedding, but not necessarily perceived as an obligatory element of the garden. At the same time, many readers of our blog will probably be interested in learning how to make a swing, so undeservedly forgotten, and moreover, purely with their own hands. They can be made in a rustic style, using metal or wood, as a seating area for an Italian patio, under a pergola or a children's version of a swing - you will definitely like some of these.

Swing as a subject of a backyard exterior is not so often found in the dachas and near the country houses of our compatriots. We propose to radically change this situation. It will be about making your own garden decor due to the need for a rational approach to spending.

Probably not worth mentioning that such exterior items are quite expensive on sale. The cost of wooden models in Europe reaches 700-900 euros. In Russia, prices start at $ 200-300. Making them is not so difficult. Working in the garden and outdoors is a rewarding hobby in every sense.

Traditional English swing benches

Swing benches belong to the traditional decoration of the terrace of a classic English house. This tradition also existed in tsarist Russia; swings were built on verandas and terraces, as a rule, under an existing canopy. Fastening to the roof beams provided the required reliability without unnecessary investment.

You can make a swing from any material available in the country for your terrace with your own hands and without the involvement of assistants. To do this, you do not have to make a base and a canopy, but only build a reliable attachment to the ceiling and make seats. A woman can also cope with such work, only you need to make sure of the reliability of the roofing so that the work is not only easy, but also of high quality.

In American cottages, such models in the form of benches with textile cushions are found on the open terrace. In Italian Tuscany, suspended wooden seats are often arranged under a flower shed - a pergola that vaguely resembles a Russian gazebo and often serves as a summer kitchen.

Swing-bed or swing-bed

Swing-bed is an alternative form of larger deck swing. A similar rocking bed can be built into a garden, under a canopy, tree shade or awning. If you add a canopy to the design, then in summer you can sleep freely on such a swing, enjoying the pleasant night cool. Use one of the ideas presented in the photo.

Photo, design and drawings of a swing bench for a terrace and garden

Pergola as a supporting structure

Free-standing A-structures without canopy

Free-standing A-shaped structures with a canopy (diagram and drawing)

Ways of fastening elements of the supporting structure of the swing

Rustic swing for wooden estates

If you are the proud owner of a Russian wooden house built from a bar, be sure to appreciate the rustic-style swing. GardenLand.ro company offers its author's models at a cost of about 900 euros. A similar garden decor is made in Russia by the family workshop Eclectichome.ru using natural materials.

A wild log is used as a building material for the construction of such a swing. During processing, the branches are trimmed and used as brackets for flower stands. We suggest you evaluate your strengths and build such a decor yourself. How to make a swing in the garden in the country from scrap materials and do-it-yourself photos, we suggest looking below.

Installation of rustic swing is carried out individually without drawings, using as a basis the standard dimensions of such backyard structures. It is not at all necessary to remove the bark from the support, as it was done in the GardenLand sample. But if you decide to create an author's sample of a swing, you will need a specialized tool for Russian log cabins.

Covering the wood base with protective agents will help preserve the wood's appearance. Specialized paints and varnishes are available in a wide range; most often, craftsmen use budget linen impregnation.

Anchor bolts and fastening accessories for the construction of the roof are used to fasten individual elements of the swing. We talked about a similar installation in the review about wooden stairs.

The main advantage of a wild log swing is its stability and high strength. The design can easily support the weight of several adults. How the installation of such a rustic decor is done can be seen in the video.

French textile chairs or Brazilian Hammocks

The French swing originated from the traditional Brazilian Hammock hammocks and is usually made of thick linen fabric or tarpaulin, accessories and a thick linen cord. The chair is shaped using cords of different lengths. They are attached to a transverse wooden crossbeam, which, in turn, to a secure ceiling of a terrace or pergola. Form-retaining cushions are placed to create the seat base.

See how to make a swing in the form of hanging chairs, benches and benches with your own hands photo. Such a functional decor for the pergola and terrace will become a favorite entertainment for adults and children.

Textile chairs can be used without a canopy; for this purpose, we recommend making a hook on the anchor bolt, to which they will be attached as needed. For quiet purposes, a portable terrace swing can be used, which in good weather can be installed outdoors without a canopy. With a sufficiently reliable base, this can also apply to different swing-bed variations.

Children's playgrounds on the backyard with swings

Children's swings can have different designs and are arranged anywhere in the infield, where the child will play or be near their parents. Make small rocking chairs for a small child on the terrace. Moreover, you can pre-fix the ceiling with a hook, so that at any time you can replace it with any other suspended structure.

Always keep in mind that grown-up children like to swing the structure strongly, which should be considered when choosing suspensions and a base. If the floors cannot withstand this force, use a more suitable model.

Video instruction for the construction of a wooden swing

Conclusion

All the proposed swing models can be made by hand, and in some cases from improvised material at no cost. The photo shows various designs that are quite easy to assemble on your own. Ideas can be applied to decorate a recreation area on a personal plot or make your own playground for children.

The trills of birds delight the soul, and the gentle swaying soothes. A garden swing at a summer cottage is needed not only for children, but also for adults. Moreover, it is absolutely not necessary to buy models of the same type, covered with fabric. It is much more interesting to create an original designer item yourself. How to make a garden swing with your own hands? What is the best choice for the frame, metal or wood? Tips from experienced craftsmen, drawings, a selection of photos and video instructions are in this review.

Homemade swing and their classification

In childhood, it seems that the "winged swing" is able to reach the sun. As we grow up, we remember this wonderful feeling of carelessness. And we subconsciously want to repeat it. This is quite possible, because swings are not only for children:

• family. Looks like a high-backed bench suspended from strong supports with chains;
• mobile swing, if necessary, can be moved to another place;
• the hammock is the unrivaled relaxation champion;
• swing arbor. Suitable for several people;
• balancer or pendulum. A floor structure in the form of a log, which is thrown from one side to the other, depending on the weight of the players;
• swing - sofas. Soft construction with the ability to embody the most daring design solutions;
• swing - "boats".

According to the manufacturing method, the swing is divided into:

• frame;
• frameless.

By installation method:

• stationary;
• portable - easy to remove and put away elsewhere.

The frame can be made from a number of materials and their combinations:

• plastic and fabric;
• tires and chains or ropes;
• wood and chains;
• rounded and non-rounded bars;
• metal.

Choosing the right option

Before starting construction, it is necessary to decide on the purposes of use and the material of manufacture. If a baby up to 3 years old needs a swing, then a purchased or home-made stationary, stable option is suitable. For children from 5 years old - light plastic or wooden hanging swing. They can be attached to a canopy beam in front of the house or to a powerful tree branch. A noisy children's company will appreciate the entertainment in the form of a balance bar (pendulum).

Attention! The most durable products are considered processed wood and metal. For "wintering" it is enough to cover them with polyethylene. Purchased swing with a plastic base covered with fabric - must be disassembled for the winter and stored in a dry, warm room.

If you want your garden swing to serve not only as a resting place, but also as an accent detail of landscape design, then you can prefer noble forging or wood eco-design.

For the older generation, sturdy benches with a high back and canopy are ideal. For noisy youth - swinging sofas with lots of colorful pillows or hammocks for relaxing with a book.

Original car tire construction

A swing that any beginner can make from scrap materials. For manufacturing, you will need a car tire, a strong rope and the ability to knit sea knots.

Installation steps:

1. Drill four holes in the tire. 2 on each side.
2. Insert the rope into the two holes next to each other and tie it firmly at the bottom, under the tire.
3. On the second side, repeat the same steps.
4. Choose a suitable branch of the tree or any other crossbar. Hang an impromptu swing on the bar. The main thing is strong knots that ensure swing safety.

Such editing will not take much time, but it will bring a lot of joy to children.

Children's fun from the board and rope

The easiest swing to make, which does not require special skills and materials, is a beam suspended from a rope.

Attention! A wooden swing without a back is unstable, therefore it is recommended to build them for children from 7 years old. If you want a swing with a back, then you can cut the legs of the wooden chair and attach it with a rope to the base and back.

For installation you will need:

• edged or unedged board 3-4 cm thick and 15-20 cm wide;
• durable rope;
• antiseptic, varnish;
• hacksaw or saw.

Step by step guide:

1. Saw off a piece of the board to the desired length.
2. Sand until smooth.
3. Cover with antiseptic and varnish.
4. Cut 2 grooves along the long sides of the board closer to the corners.
5. Make 2 more drank on both sides, about 3 cm from the corners.
6. Thread the rope from groove to groove with three stitches.
7. Attach the rope to any cross bar.

The peculiarity of the fastening guarantees the strength of the structure. At the bottom, the rope will not loosen or fray.

Making family swing from wood and metal

An evening conversation on a regularly swaying bench promotes mutual understanding. And if you decorate the wooden frame with cute pillows, then a comfortable rest is guaranteed!

Advice. The thickness of the slats for the seat of the swing bench should be greater than for the back.

Before construction, you need to prepare everything you need:

• 15 pine or spruce boards 10x25x2500 mm;
• 1 board 150x50x2500 mm;
• chain equal to the length of the swing;
• 40 self-tapping screws 80x4.5;
• 200 self-tapping screws 51x3.5;
• 6 carbines;
• 2 screws with rings 12x100;
• 2 screws with rings 12x80;
• drill, jigsaw, circular saw, hammer, plane.

Action plan:

1. Saw off boards 1.5 m long.
2. Saw out 6 curly pieces for the base of the bench from the thickest board.
3. Arrange 6 parts in 1 row, attach wooden strips to them with self-tapping screws. The bar should be fastened first from the ends, then in the middle. There will be 17 boards on the seat, 15 on the back.
4. Make two armrests and the remaining wood.
5. Attach the screw with the ring to the bottom of the armrest.
6. Attach the finished swing to any crossbar. If it is not there, then you can dig 2 beams into the ground, concrete them and connect them with a transverse board.
7. Reinforce 2 more rings on the upper crossbar.
8. Stretch the chain and hang the swing.

A properly built structure will be solid and reliable, and will last for several seasons.

Sturdy base for any kind of seat

You may want to hang a bench swing or a pair of children's board rails on the chains. The main thing is to mount a reliable base that will withstand both a small load and several adults.

For construction work, the following elements are required:

• bars 100x100 mm;
• boards for the construction of the base and canopy;
• concrete;
• self-tapping screws;
• hammer, hacksaw, drill, tape measure.

Advice. Part of the beams intended for burying into the ground should be treated with bituminous varnish or resin.

Step-by-step instruction:

1. Determine the location for the swing. This stage is important because non-portable design.
2. Dig 4 holes 1 m deep each.
3. Install the bars in the holes so that they intersect at the top, resembling the letter "l".
4. Pour the base with concrete.
5. Fasten the beams with self-tapping screws at the intersection at the top.
6. Knock down the wooden flooring from half of the slats.
7. From the second half - a canopy with a horizontal crossbar and jibs that strengthen the structure.
8. Finish the finished frame with varnish.

Any kind of swing can be attached to such a base using rings, a carabiner and a chain.

Which one to choose, a chain or a rope?

The safety of the swing directly depends on the type of suspension. A rope is a fairly durable option, especially if it is secured with a nautical knot. But over time, it can stretch out or fray. Therefore, such a suspension is recommended only for children's swings that are not subject to heavy loads.

Attention! The optimal rope is nylon rope with a cross lay from 24 mm.

The chain is a more durable option that can withstand increased stress.

Pros of using a metal chain:

• strong;
• weakening of the ring is immediately visible;
• optimal for low swing.

• when mounted on bearings, it sways very strongly. Hence, it is necessary to install a swing speed limiter;
• in large rings, babies can pinch a finger.

A garden swing is not just a resting place, but also an original highlight of any site. A rational choice of design, construction taking into account all the nuances and careful maintenance - will provide the swing with a "long life".

DIY garden swing - video

DIY garden swing - photo

Of course, you can buy a metal garden swing in a specialized store, but making them yourself is much more interesting. There are many design options, so a home craftsman can safely take ready-made drawings, use or improve them, introducing their original ideas.

A swing for a summer residence can be made of wood, metal, and in general from any materials at hand. Metal structures are distinguished by their durability, strength and reliability, and this is exactly what you need for a playground. True, first you need to decide where the swing will be located, who needs it more: adults or children, whether the structure will be stationary or portable, whether it is worth making a canopy over the seats.

Necessary tools and materials for making a swing

Having at your disposal the necessary materials and tools, inspiration and skillful hands, you can build an original rest corner anywhere in the summer cottage. To make a metal garden swing with your own hands, you need to prepare the following tools:

• sandpaper for metal surfaces;
• shovel and drill;
• grinder for metal cutting;
• concrete mixer or large container for mixing the solution;
• keys, nuts and bolts;
• welding machine and electrodes to it;
• hammer.

Of the materials you will need:

• round metal pipes (at least 1.5 inches in diameter);
• ball bearings;
• corners made of steel;
• sand, gravel, cement (M400) and water for solution preparation;
• seat (board, bench, sheet of metal);
• and anti-corrosion coatings.

Drawing and its description

When drawing up a drawing, you need to correctly calculate the size of the swing and the amount of material. If you plan to equip a family-type swing at the dacha, then the dimensions are calculated based on the following parameters:

• the width of the seat of the bench for one person (from 60 to 40 cm);
• seat height (about 50-55 cm, so that it is convenient to swing, brake and stand up);
• the distance from the seat to the crossbar (calculated individually so as not to bump your head against the frame when getting up and whether they will swing while standing).

If you need to make a suspended swing, then the distance from the edges of the rocking chair to the side support posts is determined as follows:

• 15-20 cm with chain suspension type 2-4 and 404;
• 25-30 cm for other chain hangers;
• 35-40 cm with rope suspensions.

The fact is that with strong rocking, the seat will move to the sides and can catch or hit the support posts. This is pretty dangerous. Therefore, this point must be taken into account.

A few more options for drawings (click to enlarge)

Getting started

Many summer residents are interested in how to build a swing so that it is safe, durable and has an attractive appearance. First you need to decide on the location of the structure. Next, markings are made and 4 recesses or trenches are dug, depending on how the swing will be attached to the ground. Photos of the swing below:

1. Pillars

It is best to make the sides of the structure A-shaped, so they will be more stable and reliable. Although it is possible to weld a frame from single pillars, reinforcing them with corners at the bottom. Most often, using welding, a lower rectangle is made, on which two triangles with a jumper are placed vertically (like the letter A). In this case, the swing is mobile. If you do not make the lower connecting rectangle, then the racks should be well concreted.

1. Crossbar

The welded triangles are connected to the horizontal bar. The finished structure of sidewalls and crossbars is placed in prepared pits or trenches and set strictly vertically and horizontally. At the same time, concrete is kneaded, with which the depressions are poured. To continue further work, you need to wait until the concrete has completely solidified.

1. Seat

Before installing the seat, check again that the wooden swing is level. An adult rocking chair is a regular garden bench, but without legs. For children, it is advisable to make a single or double seat. You can choose the seat to your liking. It is advisable to strengthen it from below.

1. Chains

Suspensions from a chain are not cheap, but they have a number of advantages: they are durable, do not slow down the buildup, have noticeable signs of wear in case of failure, so they can be replaced in time. For a children's swing, it is better to take small-caliber chains to eliminate the possibility of pinching your fingers.

1. Painting

After the installation of the structure, it is necessary immediately. In addition to immediately improving the appearance of the swing, the paint will protect the metal from rust and corrosion.

1. Rust converter

In order to maximally protect the metal structure from corrosion, a rust converter is used - a specially developed compound that forms a strong protective film. Typically, it is used as an intermediate between metal and paint.

Security measures

With an illiterate and flimsy installation of a metal swing, thin metal pipes may after some time break out of the ground or break over the concrete surface. Therefore, they are recommended to be made with supporting frames in the form of a triangle and concreting its lower part into a trench.

Png "alt =" (! LANG: The swing should be made of a round pipe, not a profile" width="285" height="215" srcset="" data-srcset="https://remontcap.ru/wp-content/uploads/2015/04/kacheli_chert-3..png 300w, https://remontcap.ru/wp-content/uploads/2015/04/kacheli_chert-3-174x131..png 70w" sizes="(max-width: 285px) 100vw, 285px">!}

The swing must be made from a round pipe, not from a profile one!

In accordance with safety precautions, when using a garden swing, there should be a free space of at least 2-2.5 m in the back and front. The swing is a certain danger for babies, therefore it is better to take round pipes for the frame, not rectangular ones. The absence of protruding elements reduces the risk of injury during use.

Homemade swing from metal without the use of welding and grinder will not work. Therefore, when working, it is necessary to comply with all safety rules when working with electrical devices. Especially, safety precautions should be observed if it is a children's swing.

Conclusion

Do-it-yourself installation of a metal swing for a garden does not present any particular difficulties. For those who are at least a little versed in construction and know how to hold a tool in their hands, such work will seem fun and easy.