Garden flower beds made of tires. Crazy hands: flowerbeds of tires in my country house

With the return of vintages to all sorts of vintage, let's remember the cute old way of framing garden beds with wheel tire circles. Tires that have served their driving age are easy to get, it is elementary to cut and paint with your own hands, it is not a pity to replace them with new compositions. Take a look at the photo - such unusual installations can be done at your dacha, giving the courtyard a unique charm.

It only seems that a flower bed made of a tire is out of date and cumbersome. In fact, if you wish, you can create a real work of art from tires, and with minimal costs, which is important at current prices for everything. In addition to the penny cost, such a flower bed has a number of other advantages.

Advice. Choose tires from foreign manufacturers - they are much more pliable in operation.

Having come up with the concept of the future flower bed, put the tire on a hard surface (asphalt, concrete, a piece of hardboard - that is) and draw a line with chalk on its side surface along which you will cut out the excess. Saw the contour with a knife or jigsaw. Degrease with white spirit and paint immediately, until dust adheres to the rubber.

It is better to paint first with white paint, then colored: this way the finish color will be brighter and smoother. Using two or three colors, you can create an ornament. When the paint is dry, you can fill the flower bed with soil and plant the plants.

Tires can be placed directly on the ground, suspended on chains or ropes, or folded into pyramids. It is better to select plants with a small root system: crocuses, marigolds, begonias.

Attention! Before work, thoroughly clean the tire from dirt, even rinse it under a strong pressure of water: this way you protect the tools from quick blunting.

How easy it is to turn out a tire for a flower bed

When arranging a flower bed, the tire can be presented to the viewer not only with the outside, but also with the inside. From a tire turned inside out, a flowerpot "a la Peterhof" is obtained, and if you paint it like marble, then no one will guess its origin.

To make a flowerpot, you need not a tire, but a whole wheel, with a disc. Draw a wavy or jagged line on the sidewall of the tire, which will become the outline of the petals, cut out and start turning.

Inverted tire flower bed

To do this, lay the wheel with the cut side down, step on the disc with your foot and turn the edges of the rubber upward in succession. This is a man's job and requires considerable strength and hand protection with thread gloves. Watch the video how this operation is performed. The result will be a flowerpot with a rounded metal leg.

Advice. If you plan to turn the tire inside out, it is better to take copies with maximum tread wear: they are much softer.

Apply paint to it, and not only on the outside, but also on the inside, just below the level to which you plan to pour the soil. Since the flowerpot will be raised above the ground, it can be planted with ampelous plants: petunia, fuchsia, bacopa.

The most original ideas for a flower bed from tires

The flexibility of rubber and the flight of imagination of a gardener not burdened with extra money work wonders. Here are some examples of fairly original and very simple ideas for a flower bed made of unnecessary tires.

Wall flower bed. The tire is used in an upright position. To do this, it is screwed to the wooden wall of a shed or bath with a screwdriver. A duet of a lushly blooming ampelnik (nasturtium, petunia) and a climbing plant (beans), from the shoots of which you can lay a bright green wreath on top of the tire, will look good in it.
"Flower Mountain". This is a large structure for those with a large area and a lot of old tires. They do not need to be cut or turned out: wash, paint each in its own color and put it in a composition. At the base of the "mountain" rests 6 tires, on them - 5 pieces, above - 3 pieces, the mountain is crowned with one tire, preferably of a smaller size. In each, you can plant flowers of a certain type.

Suspended flower bed

Hanging pots "Bird of Paradise". The tire is cut into strips, from which the tail and the hanging handle are subsequently assembled. The beak, eyes and tuft are glued with rubber glue. The finished bird is brightly painted and varnished, except for the inner part intended for soil and plants. Small flowers are planted in the bird, for example, tagetes.

Your own garden is exactly the place where you want to show your imagination and individuality. You can decorate it with anything, any old things, which usually accumulate a lot in the country. Try to make a flower garden from a car tire: time will fly by, and the result will delight everyone.

Many people believe that only an experienced specialist can develop a beautiful landscape design. But practice shows that this point of view has nothing to do with reality. Everyone is capable of making a garden or a personal plot - there would be a corresponding desire.

The basics of landscape design

In order for a dacha or an adjoining territory to look decent, often neither high professionalism nor significant financial costs are required. Anything can be used: fragments of bricks, stones, plastic bottles, old watering cans and much more.

Flowerbed of tires

For example, an alpine slide, which is the object of dreams of many owners of suburban areas, may well be built without the involvement of specialists. The most important thing is not to be afraid to experiment and boldly combine different objects and objects.

Interesting. Often old junk, which, it would seem, is time to throw it away, can do a good job in decorating the territory.

So, for example, from an old wobbly chair you will get a beautiful stand for a flowerpot. With an old chest of drawers, if you tint and decorate it appropriately, you can decorate any blank wall by planting bright flowers in its boxes.

More complex structures can be made from scrap materials, for example, having a metal rod and flower pots at hand, you can build a very interesting vertical flower bed.

Among domestic gardeners and owners of suburban areas, flower beds from tires are in high demand. They will be discussed below.

Types of flower beds from tires

To start creating flower beds from tires with your own hands, you do not need special experience and knowledge. The most important thing is to have the necessary tools and basic information on hand.

By the type of construction, tire beds are:

low;
high;
single-tiered;
multi-tiered;
curly;
suspended;
round.

Round flower beds made of wheels are the easiest option in execution. All that is required to organize a flower garden is to take tires, paint them in arbitrary colors, fill them with soil and plant plants.

Interesting. To get an interesting composition from a material such as a tire, you can paint the wheel material in bright colors and, stacking on top of each other, form tall flower beds.

As for multi-level structures, they are created from tires of various diameters. They are placed on top of each other according to the principle of a toy pyramid (in descending order of size) and filled with soil. This design is perfect for planting ampelous plants.

Layered tire construction

Suspended flower beds made of tires can be attached in different ways: to a pipe, chains or a rope to a tree branch, etc. Only first you should not forget to cover the bottom of the improvised pots with some material.

Step by step instructions

Before proceeding with the manufacture of flower beds from tires, you should decide on the dimensions and design.

Flower bed

Do-it-yourself flower beds look very stylish. For work, you need a tire, a sharp knife capable of cutting through thick rubber, and a marker (or chalk).

Flower-shaped flower beds Manufacturing work is carried out as follows:

Markers mark the cut points.
The tire is cut around the circumference in the form of zigzag petals (oval, semicircular or triangular).
The tire is turned over and, driving a knife along the thickening, a circle is cut out from the reverse side of the tire.
Around the circumference inside the tire, transverse cuts are made at a distance of 20 to 25 cm from each other, starting from the cut edge to the end of the tread.
The tire remains unscrewed, and the design of the flower bed is ready.

Flower bed

Then you need to paint the product in a beautiful color, fill it with earth and plant flowers. Oil paint works best. Other types of paint may peel off.

Pot from an old wheel

Another interesting master class, which will be useful to lead, is devoted to making a stylish garden vase from a worn wheel. For work, you need to prepare a tire, which has a disc, knife and marker. Then they act according to the following scheme:

A zigzag line is marked along the circumference of the tire, along which it will then be necessary to cut.
Cut the tire. To facilitate the cutting work, it is recommended to periodically dip the knife into machine oil.
Turn the tire inside out. It is better to turn it out together and in parts.
The pot is ready. All that remains is the same painting work.

Important! Before pouring earth into such a vase, you must remember to put a gasket on the bottom, in which small holes should be provided to remove excess water after watering.

Flower bed chamomile from tires

This is another simple and interesting option, how to quickly make a flower bed in the form of daisies from the wheel. To work, you will need several tires and a sharp knife. In general, work will take no more than half an hour. The step-by-step workflow is as follows:

All tires are cut in half.
A curly fence in the shape of a flower is formed.
They cover the ground and plant the plants.

Form the heart of the chamomile from flowers. Alternatively, it can be in the shape of a circle, laid out from a material such as a plastic bottle (bottoms to the top) or a stone.

Flower bed chamomile from tires

If you approach the process of creating flower beds from tires creatively, original ideas will not keep you waiting. Answers to the questions: is it worth using additional plastic material, how and how to paint the wheels for the flower bed, and what to plant in the flower garden as a result, you will find along the way.

Parrot cache-pot

To create an original pots in the form of a parrot from an old wheel, you will need the following materials:

a tire with a shallow radial tread;
a strip of iron for the clamp;
washers, nut, bolt;
spanners;
drill.

Parrot cache-pot

The work is done in the following order:

With a knife, symmetrical cuts are made in the tire 2/3 along the bead ring.
The side part and the tread are cut at a distance of 1/3. On the larger side, the side part is separated by means of a triangular cutout.
The tire is turned inside out.
The bird's beak is cut from the side.
A smaller part of the tire is cut along its entire length (the cut should be slightly larger than the size of the future beak).
Using a clamp, insert the beak and squeeze the halves.
Drill a hole with a drill.
The halves of the head are pulled together with washers, nuts and bolts. (To make the head narrower than the body, part of the tire must be cut off).
A tail is cut on the larger side of the tire.
The workpiece is painted.
A clamp is made from an iron strip, with which the sides of the pots are pulled together (as an option, an ordinary rope can be used).
Color the parrot in full.
Hang the planter on a rope or screw it with wire to a horizontal structure.

How to turn a tire out

It will take some effort to turn the tire inside out. To facilitate the work, it is recommended to make large cuts - up to the tread. First, one side is turned inside out, then, slightly flattening the tire into an oval, they do it completely.

If you still do not have enough strength, you should cut the part of the flower bed opposite the petals in a circle to remove the steel cord. True, in this case there is a risk that the structure will not keep its shape well enough.

Tire handling

How to cut a tire

You will need a sharp knife to cut the tire. First, a small hole is made in the tire. Then a cutting tool is inserted into it and the material is cut according to a predetermined marking. The knife should be periodically dipped in water or machine oil. This will greatly simplify the task.

How to paint the wheels for a flower bed

When the structure is ready, it remains to paint it. To do this, the surface is completely degreased (for example, with acetone or white spirit) and allowed to dry.

The surface can be additionally primed, but this condition is not necessary, since even without this, the paint on the rubber lays down quite well. The staining process itself does not differ from similar works on another object.

Planting flowers and rules of care

Having dealt with the question of how to make a tire from a car wheel and how to cut and overlay everything correctly, it's time to understand what is better to plant in a flower bed of tires. Of course, there is no clear instruction as to which flower is better to place in flower beds made of hand-made tires.

Cover with flowers

Nasturtiums look no less bright. But, when planting this flower in flower beds made of tires, it should be remembered that the culture does not tolerate transplantation very well. Accordingly, nasturtium should be placed in a permanent place of growth in the form of swollen seeds or ready-made seedlings in peat cups.

In addition, you can plant marigolds, vervain, viola and other not too whimsical flowers.

It is allowed to plant in homemade pots and perennials. These can be chrysanthemums, carnations, daisies, ornamental bows and much more.

The main condition is that the flowers planted in tires should be unpretentious and require minimal maintenance.

No matter how interesting the idea is, and no matter what kind of flowers was planted in an impromptu flower garden, the structure itself should be placed in such a way that access to it remains free. This will ensure that the plants are properly cared for. Only in this case the use of tires as flower beds will be justified.

As for the care of flowers, it largely depends on what is specifically planted, and does not differ from the manipulations performed with a similar plant planted in open ground or a flower pot.

Concluding the conversation about how you can make a flower bed out of the wheel, it is worth noting that such a constructive solution within the framework of creating landscape design has a number of undoubted advantages:

the durability of the flower bed;
good tolerance to temperature changes;
practically zero financial costs;
high rate of aesthetics.

Rubber is a very malleable material, and the question should not be about how to make a flower bed out of a tire (especially since it is very easy), but which version of a flower garden is better to make from a set.

You can even make an interesting flower bed with your own hands from a car tire. Crafts from tires have long been a success for decorating a garden, and today we will tell you how to make a simple mini-flower bed from an old tire.

DIY tire flower bed

The easiest option is when you use the tires entirely, placing them in the chosen place and filling them with earth. But before that, a drainage layer of pebbles, expanded clay or organic mulch must be laid under the rubber.

Such a mini-flower bed looks good from large tires when the usable area is wide enough and allows you to place several rows of different plants, creating an interesting composition. It is advisable to choose for landing unpretentious flowers- tall zinnias in the center; marigolds, ageratum or cineraria - along the edge.

If you make the flower bed higher by placing the tires one on top of the other, this will create additional convenience when caring for it. In this case, you can plant an ampelous petunia or lobelia along the edges to close the view of the cracked cord.

If you are using small car tires, cut off the top with an electric saw or a special knife to increase the area of the mini-flower bed.

However, the black tires themselves look gloomy and trite. Take it one step further and paint them a bright color. And you will see the flower beds, and the whole garden will become much more comfortable and fun.

How to paint tires for a flower bed

In order for the old and cracked tire to take on a bright color well, degrease the rubber with acetone or white spirit, paint it first with white or yellow paint, and only then apply a bright one. Then the color will not fade and will last for a long time.

Good advice: do not put a thick layer of paint - under the influence of rain and frost, it will fall off in pieces.

What brand of paint< использовать, в принципе, не имеет значения.

Special paint for rubber does not crack in the cold and closes cracks and grooves well, but it is quite expensive. Feel free to use old enamel or oil paint left over from the last repair.

Paint in spray cans will also work - it is even preferable, since it penetrates well into cracks and is applied in a thin layer. With such a can, you can make any pattern on the painted surface, and easily get a multi-colored base for the flower bed.

Paint the tires in different colors and place them side by side or one on top of the other, or arrange them in a random order throughout the garden, or group them in one place - and your garden will noticeably liven up.

For those who know how to create crafts from tires using a special knife or saw, you can cut flower beds in, figurines of animals, birds or flowers with your own hands. If you need ideas and ways to make beautiful and complex flower beds out of tires, I recommend reading another one.

Used photos by rlibunao, Jules.

Original frames for garden plants can be created even from waste material: both the yard is decorated, and the ecology is good. Learn how to make flower beds with your own hands from flower tires in the country or in the yard. Evaluate the feasibility of such work, familiarize yourself with the methods of cutting, turning out and painting car tires, with the nuances of their competent choice. Compare photos of finished products and choose a master class for making an unusual flower garden that is suitable for the degree of labor intensity.

The feasibility of making flower beds from tires

Used tires are a material in which any landscape designer, who presents how to make flower beds from tires with his own hands, opens up new possibilities. It is the tire, and not just a sheet of rubber, that has certain advantages that make it easier to work with it:

A penny cost. Surely among the neighbors there are car owners who dream of parting with old tires. For them it is rubbish, but for an artist it is a future work of art, which can only be rolled to the site or brought in the trunk.
Ease and speed of processing. Chalk, a sharp knife or jigsaw, a grinder and a spray can of paint - these are all the tools you need for such creativity. And the simplest flower bed of cylinders is built in half an hour: the tire is put on the ground and "stuffed" with soil.
Durability. A rubber flower bed does not attract bacteria and fungi, does not rot, is not afraid of accidental impact and does not collapse under the influence of precipitation. If it cracks after a particularly severe frost, it is easy to replace it.
Mobility. A flower bed made of an old tire is a one-piece structure that, if necessary, can be easily moved to another place. To do this, you just need to remove the soil from it.
The possibility of transformation. Even self-made flower beds made of tires can get bored over time. The easiest way to avoid this is to repaint the outside and plant other types of plants.

Figured flower bed from an old tire

Doubts about the advisability of decorating a garden with flower beds of tires are usually associated with the sizes of cylinders specified by the manufacturer. In a very modest area, they can really look foreign, and in a large area they can get lost. The problem is solved by combining tires with paths, benches, lighting elements, as well as the construction of flower beds from several tires and multi-tiered compositions.

Option for the lazy: potted plants are placed on a stand

How to cut tires and how to do it right

When you look at the wheel, so huge and rigid, capable of withstanding the weight of a loaded Gazelle or a powerful SUV, the question arises of how to cut a car tire for a flower bed. In fact, rubber is even easier to handle than plywood if you choose the right tool for each step of the job, of which there are three:

Ripping rubber. The best tool for the first cut is a boot knife. You can make it yourself from a power saw blade or a planer blade. The handle of such a knife is wrapped in several layers of electrical tape, which allows the knife to sit firmly in the palm of your hand. This is important as the rubber will resist the blade. The knife is inserted into the incision and made upward movements, bending the rubber sheet to the side with the other hand.
Sidewall processing. You can trim tires for a flower bed evenly or in waves. In the first case, a boot or other sharp knife with a thin butt is enough, in the second it is better to use a jigsaw, the file of which is periodically lubricated with grease or a solution of laundry soap. Some craftsmen use a grinder with a small disc, but high speed entails strong heating and even burning of the rubber with smoke and an unpleasant odor.
Cutting the cord. Steel cord reinforcement (breaker), which serves as the basis of the tire carcass, is cut with a grinder, less often with metal scissors. The presence of steel in the belt can be recognized by the Steel marking. The absence of such a marking indicates a nylon cord, which is cut with a strong sharp knife.

The car tire is more complex than it seems

The jigsaw is the perfect tool for cutting old wheels

To cut the tire for the flower bed and not injure yourself, be sure to use thick gloves and goggles. It is especially necessary to handle sharp metal cord threads - splinters from them are very painful. You need to work on a wide, hard surface: a table or a piece of plywood on the ground. With a large amount of rubber dust, which is characteristic of Chinese tires, a respirator will be useful.

How to choose and prepare a tire

Working tool for steel cord - angle grinder

If it is possible to choose a material for a flower bed, you can greatly simplify the work of processing rubber with your own hands. To do this, you need to use the data:

the origin of tires: imported ones are better cut;
seasonal use: winter is more flexible;
service life: the more worn out, the more pliable;
cord material: metal will require more effort than polymer.

Well-preserved and brightly colored tread

The degree of wear of the tread should also be taken into account. A clear pattern of checkers will add additional expressiveness to the finished flower bed. But if you plan to turn the tire inside out, the tread needs to be as "bald" as possible.

In any case, the first operation to transform a tire into a small sculptural form is to remove dirt. The tire is washed under a powerful stream of water from a hose. This not only adds aesthetics, but also protects cutting tools from rapid dullness.

Options for flower beds from tires and master classes

The imagination of home craftsmen knows no bounds - those who like to equip personal plots with their own hands have come up with dozens of options for decorating flower beds from car tires.

Classification by form and method of manufacture

Beds of old tires are conventionally divided into several groups:

horizontal single-tier - the most simple and unpretentious;
horizontal multi-tiered - the first floor of such a flower bed is 5-7 tires, on top of them there are three more and the last one crowns the composition;
vertical - there is a tower of tires, flowers are planted in the top and in the pockets cut out on the sides;
in the form of items of rural use: teapots, carts;
in the form of various animals.

Another interesting type of flower beds made of unnecessary rubber is hanging pots, with which you can diversify the wall of an outbuilding.

The dull brick is simply unrecognizable

How to mark rubber

To make a flower bed of tires even, before cutting, you need to outline a line along which a knife or jigsaw will move. It is convenient to do this with chalk or a bright marker that will stand out against the graphite background of the rubber.

The brighter the markings, the more comfortable it is to work.

The first line should be in the shape of a ring. It is carried out in two ways:

Measure with a tape measure equal distances from the outer or inner edge of the tire, apply strokes (approximately every 10-15 cm) and connect them.
Holding the chalk with your thumb or forefinger, grasp the protector (or bead ring) with your little finger and lead the line.

To mark the petals, you will need the inner and outer lines. Marks are applied to each, then they are connected with a wavy line of any style. At this stage, it is important to take into account that petals less than 7 cm wide do not hold their shape well.

Four wheels and a little paint - the result is a bright flower garden

Flower - fast and reliable

The options presented in the photo in this section are among the easiest to manufacture, but quite effective due to the competent floral decor. The following step-by-step instruction will help a novice landscape designer to make a flower bed out of tires.

Take four identical tires and rinse them thoroughly under running water.
Set one aside for now, and on three, draw a line with chalk dividing each one exactly in half.
Cut the three marked tires with a boot knife or jigsaw.
Paint all tires using a paintbrush or spray can. Choose a color so that it blends well with the plants you plan to plant.
Lay the halves of the tires in the form of petals, fill the flower garden with prepared fertile soil.
Place the whole tire in the center of the composition and also complete with soil.

Flowers can also be cut from tires

Turtle - Feel like Galapagos

To make a flower bed of car tires with your own hands turn into a genuine creativity, try making a turtle figurine:

Prepare two tires for the flower bed. Leave one intact, and cut the protector out of the other.
Divide the protector into four equal pieces that will become the turtle's feet.
Make a short, triangular tail out of a piece of tread.
For the head, take a flat bottle of household chemicals, for example, from "Mister Muscle". Its neck will become the neck of a turtle.
Make cuts in the whole tire and insert the paws, tail and bottle into them. Secure with self-tapping screws.
Color the turtle, draw its face.

On a turtle-bed in the garden, low bright flowers look good: tagetes, nasturtium, ornamental cabbage.

Frog - from princess to traveler

If there is a pond in the garden, plant a cute frog figurine on its shore. The good thing about this idea is that the frog can be done without the laborious cutting of the steel cord. The main thing is not to regret the rich green paint.

Eyes from plastic bowls, feet from a hose and a rubber mat

The body of the animal is laid out from three solid tires in the form of a two-tier flower bed. For the eyes, take the tires of a smaller diameter and set them vertically.

Depending on the desired degree of glamor, long or short eyelashes are glued with rubber glue or screwed with self-tapping screws, "lips with a bow" or a simple smile are painted with red paint. You can complement the image with an arrow, a crown or a pair of ceramic ducks.

Flowers in such a bed are placed behind the eyes and in the lower tier. Around the figurine, grasses and sedges are appropriate, hinting at marsh vegetation.

Video: One hundred garden frogs do it yourself

Swan - white grace on a green lawn

If you have learned how to cut tire beds with your own hands to decorate your garden, you can try making a swan. This work requires some skill, since part of the tire in such a figure must be cut, turned out and strengthened in a certain way. Let's consider in stages the process of giving birth to a beautiful bird from rubber scrap.

Cutting the tires is the most crucial moment

Choose a tire for the flower bed with the most worn out tread, since the curly cuts will have to be done on it.
Using the pattern in the photo, apply the lines of the head, neck, wings and tail to the protector. Pay attention to the shape of the beak - this is the most difficult part. Some craftsmen make the beak in the form of an ordinary triangle, while cutting is easier, but the bird loses its realism.
Drill holes with a diameter of about 10 mm at the nodal points of the marking.
Cut the rubber along the markings with a boot knife or jigsaw. Work should be started from the base of the figure's neck, leading the cutting line to the head. To prevent the rubber from vibrating, it is recommended to cut both sides in parallel, 5-10 cm each alternately.
Finish the edges of the parts: strip the rubber and the ends of the cords. Tire swan flower beds attract children - you should take care of their safety.
Turn the wings inside out.
Strengthen your neck with a steel bar. To do this, drill two rows of holes in it and then through the whole body to the base of the tail, at a distance of about 15 cm from each other. Pass the wire staples through the pairs of holes.
Attach a steel bar to the base of the tail and secure the chest and neck of the figure to it, twisting the ends of the wires with pliers. Trim off excess and give the swan neck a regal curve.
Paint the finished shape, highlighting the beak and eyes. It will look especially impressive if you plant it (and attach it with self-tapping screws) in a pool made of a blue-painted tire.

Instruction in the photo:

Swans on stands, as if on waves

Vase - build a small Peterhof in the garden

The highest aerobatics of the transformation of car tires is the manufacture of flowerpots with legs from them. It is worth turning the unsightly wheel inside out and painting it - before you is a masterpiece of landscape gardening art, in which it is difficult to recognize the source material.

Elegant flowerpot for a flower garden

To create flowerbeds in the form of flowerpots, they take "bald" winter car tires of foreign production - they are the softest. On the sidewall, jagged or rounded-wavy petals are marked, along which the rubber is cut. At this stage, it is important to try to keep both sides of the cut neat, as one of them will be the edge of the vase and the other will be the edge of the leg.

Stages of turning a tire into a flowerpot

It is better to turn the wheel out together. It is placed with the incision down, for an emphasis, they step on the disk with their feet, grasp the edge of the incision with both hands and pull it towards themselves. Gradually move in a circle, pressing down on the tread in its most convex part. If there is a camera inside the wheel, it is cut off at the end of eversion. Due to the laboriousness of the process, it is recommended to watch a video on how to turn out a tire for a flower bed with your own hands.

Video: How to unscrew a car wheel

The flowerbed-vase from the tire is almost ready, but it looks like it was taken from the seabed. The rubber walls and the disc are cleaned, degreased and painted, and from the inside, too, about a quarter of the height, since the ground level will be below the petals.

Geotextiles are placed at the bottom of the flowerpot so that the earth does not spill into the holes of the disc. Drainage, soil are poured over the fabric and flowers are planted in the flower bed.

Gift for the Mistress of the Copper Mountain

Painting flower beds from car tires

Now about what the wheels for a flower bed are painted with and how to turn a boring tire into an interesting flower garden. The main requirement for paint is resistance to atmospheric agents.

The choice of paint and technical points

Tires are painted with enamels, oil, acrylic and car paints, nitro paints. To beautifully paint tires for a flower bed, you need to follow a few rules:

select light colors so that the soil inside does not overheat along with the roots of the plants;
do not apply too thick a layer of paint, otherwise it may crack, especially in severe winters or in the heat;
remember the primacy of plants and do not let the picture dominate the flowers.

Bright colors set a festive backdrop on the site

The design of tire beds begins with degreasing them with acetone, white spirit or special rubber fluids. When the used product has completely evaporated, the surface is smoothed with a very fine sandpaper. Then a thin but continuous layer of white is put as a primer - this will allow any shade to play in full force.

It is better to apply the paint by means of an aerosol can, then it will penetrate into all the relief areas of the tread, but there is a great risk of staining the grass around. Therefore, they paint the tire with a spray can, spreading thick polyethylene under it. Each layer is given a drying time of at least a day.

You can decorate a flower bed of tires with your own hands with a brush. This is longer, but you can work, having previously installed the product in a permanent place. With the help of a brush, they also create more subtle patterns and patterns, emphasize details and shapes.

Folk painting: bright, original, impressive

Taking into account the general concept of garden decor will allow you to paint the tires for the flower bed correctly, while you can:

leave plain;
arrange in stripes;
cover with a pattern using a stencil;
paint on the tread checkers;
turn into an ethnic flower garden.

Do not rush to throw away the unusable tires. They will be burned by adding pollutants to the air. Try to turn them into a unique man-made flower garden, which will decorate the garden and warm the soul. Bright, solid and practically eternal flower beds made of used tires are a wonderful application to the creative impulses of a person living on their land.

One of the usual summer cottage practices is to create flower beds in the form of different shapes from old car wheels. This kind of creativity has many benefits, and with the right approach, it can be turned into real art.

Using old automobile rubber to create a flower bed is an almost win-win option for using these products. There are several advantages:

this is a profitable material - production will not take any money (only small expenses for paint are possible);
working with tires is simple and convenient, you don't need to make any special efforts;
this is a very interesting creative process, since structures of various shapes can be made, and not from one tire, but from several at once;
rubber tires have an ideal round shape and are perfect for making ordinary flower beds;
tires are durable - they will serve as a flower bed for many years, since they are not subject to decay;
By using rubber to decorate the site, you contribute to the overall environmental situation - in this case, the material is successfully used for practical purposes, and is not burned at the landfill, polluting the air with combustion products.

There are practically no disadvantages of using rubber - the only limitation is that many gardeners dislike tires for their unpresentable appearance. But this problem can be easily solved - it is better to choose normal, solid rubber, and besides, with the help of paint and other decorative elements from a regular tire, you can create a whole work of art. More on this below.

Using old automobile rubber to create a flower bed is an almost win-win option for using these products.

Gallery: flower beds from tires (25 photos)

To make a flower bed from a tire, you can do nothing with it - just paint it in a beautiful color and wait until it dries. And you can make a beautiful decorative product out of it, which will decorate the site not only thanks to the flowers, but also by itself.

Manufacturing technology is simple, and even a woman can do it. It is important to consider several nuances, which are detailed below.

Choosing a tire for making flower beds and garden figures

If the farm does not have 1-2 old tires, but a whole "collection", then it is worth choosing the right product correctly. You need to be guided by such considerations:

Imported tires fit better than domestic ones, since rubber is softer in texture, it has a thin structure, making it much easier to work with it.
If you choose between winter and summer tires, then preference should be given to winter, since they are more durable, and in this case there is less risk of damage to the material in the process of working with it.
Oddly enough, but the more the tire has been in use, the better, since in this case the tread is subject to heavy wear. And this makes it easy to turn the product to the wrong side, which is very useful in work.
Of course, if you can choose between heavily shabby, unsightly-looking products and more attractive, the choice will be for the latter. Also it is better to take rubber without stubborn, non-removable dirt.

As for the size, it all depends on the gardener's imagination. Theoretically, tires of any diameter are suitable - the main thing is that they harmoniously fit into the overall composition, if it is supposed to make several flower beds at once.

Imported tires are better suited than domestic ones, since rubber is softer in texture, has a thin structure, making it much easier to work with it

How to turn the tire out correctly

In fact, There are three important things to learn when working with tires:

You need to learn how to turn them out correctly.
There is a need to master the ability to cut the material in the right places and bend over the appropriate parts.
Finally, you need to figure out how to paint a tire correctly and beautifully.

If you turn the tire inside out directly, without any tricks, most likely you will have to call a man. And you can do it yourself. It is quite easy to turn the tire out by making small cuts so that they reach the tread. The technology is as follows:

First, the product is turned inside out on one side.
Then the rubber is compressed so that its edges almost converge (top and bottom).
After that, the work is completed from the other side.

How to make a flower bed from a wheel with your own hands (video)

Paint tires with ordinary paints on drying oil(water is quickly washed out by rain), but here it is important to pay attention to several recommendations, which are due to the process of the subsequent operation of the tire (prolonged exposure to the open sun, design features):

It is better to select paints in light shades, since they reflect the sun better than dark ones - the tire and the soil in it will not heat up so much.
You need to apply paint in 2-3 layers, choosing the golden mean: a too thin layer will quickly fall off, cracking from temperature changes and washing off with the rain. A layer that is too thick will begin to flake off due to the same factors, since the paint will not adhere well to its own layer.
Better not to be lazy and paint the small inner layer closest to the outside. In this case, the appearance of the product will be much more beautiful, moreover, it will last longer.
Before applying a layer of paint, the tire must not only be thoroughly rinsed and dried, but also treated from possible grease contamination - this is done with gasoline, acetone or oil paint solvents.
In addition to applying the main layer, it is not forbidden to create your own patterns - if you cannot draw with your own hand, you can safely use stencils that are cut from ordinary cardboard.
Finally, you need to decide on the color scheme in advance, based on the flowers that are supposed to be planted, as well as from the tire composition, if several flower beds will be used at the same time.

Important! Most conveniently and quickly, you can paint a tire from an aerosol using a special spray can. You can buy such a product at a car shop.

Paint tires with ordinary paints on drying oil

How and what to cut a tire

Since the tire is cut for decorative purposes, this is done by creating a certain pattern (most often - petals). That's why you need to cut not with a knife, but with a jigsaw, optimally - electric.

When working, you can use files of different sizes, which can be easily inserted into the jigsaw. The choice of a particular file depends on the subtlety of the intended pattern.

Of course, before starting work, you should plan the corners, the interval of the pattern, mark it on the surface and only then start sawing.

Important! If the outside edges are very easy to saw, it will be harder to cut as you get closer to the edge - so work should be done as long as the plane remains. As soon as the downward turn begins, you can stop sawing.

You need to cut the tire not with a knife, but with a jigsaw, optimally - electric

Making flower beds from tires

There are a lot of options and ideas for making a flower bed from a tire - from a simple untreated tire to complex options in the form of whole compositions from these products.

A simple flower garden from a tire: fast and tasteful

If there is no time and effort to work with sawing, and even more so turning out the rubber, you should not refuse to transform your flower garden with the help of a flower bed from a tire.

The best option is to use a high flower bed, from a truck. In this case, you do not need to use additional stands.

The sequence of actions is as follows:

The tire is thoroughly washed from dirt and dried.
You can make 8-12 petal-shaped cuts and remove the inside for a very original look.
According to a pre-planned plan, paint is applied to it and, if desired, patterns.
Outside, the tire can be decorated with stones that are glued to a cement base - in this case, few people will be able to identify the source material, the product will look very rich.

The best option is to use a high flower bed, from a truck

How to make a vertical flower bed from old tires

It is not at all necessary to place the tire just on the ground on its larger side - you can take advantage of the fact that the groove is tight. Accordingly, there is enough space for small flowers, but it will look much more original.

One of the options is to make a vertical flower bed in the form of a bird:

A pattern is outlined according to a previously prepared drawing - for example, in the form of a parrot: for this you need to cut out symmetrical feathers of the wings and tail.
Corresponding cutouts are made according to the pattern.
Then the tire is turned inside out and painted in bright colors.
You can hang such a tire using a hook. It is very convenient to do this with an uncut tread. You can also hang it by the handles, which will remain in the form of a circle from the uncut part.

Important! In the case of flower beds of this design, it is important to make holes under the bottom, otherwise the water will have nowhere to drain. You should also periodically water the soil - the rain will not always be able to get in if the top is not cut off.

How to make a swan out of a tire with your own hands (video)

Suspended flower garden made of tires

Suspended flower beds can be made from tires - and not only from vertical, as described above, but also horizontal.

Mounting options:

For a hook hanging from the edge of a roof or post.
With a rope pulled over a tree.

If you weigh a horizontal tire, you need to take care of the container in advance, which fits into it and is held by the edges.

Suspended flower beds can be made from tires

Flower beds made of car tires in the form of a swan

The classic, but not obsolete, use of a tire is making a swan.

There are 2 options:

Horizontal swan.
Vertical swan.

The technology for making a vertical flower bed is as follows:

Marking is made taking into account that half of the cover is the bird's neck.
On the surface, you need to draw a head with a beak, a body and a tail.
All details are cut along the contour - better with a grinder.
Then the structure is neatly turned outward.
The swan is painted and placed in a chosen place in the garden.

The classic, but not obsolete, use of a tire is making a swan

Other interesting ideas for flower beds from tires

If there are a lot of tires, then there are much more ideas for creating a flower garden:

Multi-tiered flowerbeds of tires of the same size, arranged like a house made of cubes.
Multi-tiered flower beds made of tires of different sizes, arranged in the form of a pyramid.
Flowerbeds in the form of a coffee cup on a saucer.
Flower-shaped flower beds (petals are made from semicircles).
In the form of a real flower on a pedicel - one tire will serve as a flower with loose petals, the other - in the form of a stem.
Flower beds in the form of flowerpots.
Flowerbeds in the form of pieces of furniture (for example, trellis).

Tires can make a flower bed

Choosing plants for flower beds from tires

Theoretically, many flowers are suitable for such flower beds, but since it is undesirable to often disturb the structure, it is best to plant perennial plants with bright flowers and beautiful greenery, for example:

zinnias;
crocuses;
daffodils;
pansies;
peonies;
cornflowers;
Adonis;
periwinkle;
daylilies and many others.

ADVICE:

If a whole composition of flower beds is being made, then it is better to plant the highest plants in the center, and lower plants at the edges. In this case, it is important to skillfully combine flowers, as in ordinary flower beds.

Many flowers are suitable for flower beds.

Other products from old tires in the country

Of course, not only flower beds can be made from such a valuable material, but also a number of other useful devices that will not only decorate the site, but also will allow you to diversify your leisure time on them:

Swing for children are made of one strong tire, to which a metal chain clings and is attached to welded posts or to a powerful tree.
Another option swing - in the form of a vertically located horse... This is a very exciting idea - hardly any of the neighbors have this kind of fun.
The swing can be made not suspended, but ground- for this, the tire is cut exactly in half, a seat is made from a solid board, and the attraction for kids is ready. In this case, it is important that the internal structure is sufficiently rigid.
All kinds of animals made of tires- another original use case: centipede, birds, frogs.

The swing for children is made from one durable tire

Making a simple fence from car tires

A very practical and at the same time original way of using tires is making a fence. This will require at least 40-50 old tires of the same size.

The technology is as follows:

The tires are staggered on top of each other.
Fastened with ordinary self-tapping screws.
Plants can be planted in the upper row - curly ones are especially suitable, for which you need to additionally hold cords.

Of course, there may not be so many tires. Then there are more familiar options:

Tape fence (from tires completely cut and elongated in a straight line).
Fencing in the form of semicircles.
A fence in the form of tires, laid and reinforced vertically.

A very practical and at the same time original way of using tires - making a fence

Delightful figures from old tires by sculptor Yong Ho Ji

Some things seem implausible until you can see them in practice. For example, the fact that making different figures from tires can be turned into an independent direction of applied art.