How to make a tree vase. How to make outdoor colors for flowers with their own hands? Instruction and photo ideas

Decorative vases will make the design of the garden plot finished. They can be purchased in garden centers or make their own hands. Consider ways how to make a vase with your own hands from various materials.

color vases with their own hands. Photo master class

Dicks from stumps with their own hands

For the manufacture of a street vase from the stump with their own hands, you must first pick up a suitable tree. It may be a thick base of the trunk or a small snag. The decorativeness of the vase depends on the shape of the tree and the texture of its surface.

Begin to make a vase with their own hands from the definition sizes. The optimal height is forty centimeters. Superior scolded with chainsaw. In this case, it turns out a smooth slice and the bark is not damaged, which adorns the surface of the future vase.

On the surface of hemp placed a circle. Internal content dried out Using the cone type drill. First, they make holes in a depth of ten centimeters around the perimeter, then knocked out the wood with mechanical bit and complete the processing of the walls by conventional chisel.

vases for the garden do it yourself. Photo

The inner surface of such a garden vase is processed morilka. For this, the composition is poured into a small glass and a painting brush is applied to all surfaces of the product, trying not to leave non-crushed plots. Additionally, you can use various decorative elements.

Founded chubbanks nail to the dried and processed bottom. For it, it can be used as a suitable diameter. Parts of one circle are connected by a construction staple on the inside. The next row put so that the seams are constantly shifted. Among themselves the rows are also connected by the stapler.

street vases made of stumps with their own hands. Photo

Inside the received vase, we put the clay or plastic container of the appropriate size. Putty soil and planted flowers

Cup of the garden from concrete. Master Class

From cement with the addition of other components, you can make both large colors for flowers and relatively small ones.

To make a large-size vase plastic form With parameters 53 cm in diameter and 23 cm in height.

Solution We make from two parts of white cement, one piece of perlite (agroperlitis) and two parts of the rigorous peat. As a measuring container, you can take a two-liter bucket. The mixture of three components is divorced by water until the mass of thick consistency is obtained.

vasons for giving with their own hands from cement. Photo

Since such a vase is heavy enough, it is better to immediately do it in a permanent place.

To make the Cement Vase, with your own hands, take a plastic pot, which is a shape, and linse it with a thin film. Cellofan must be reappeared so that non-clear folds are not imprinted on the surface.

First lay the solution to the bottom. The layer thickness should be approximately four or five centimeters. To control the thickness, matches or toothpicks are excellent.

To improve the strength of such a large product, you can install metal wire frame or other reinforcing design. It is possible to strengthen the composition to add to it about the handful of crushed fiberglass. Since the Vazone is large enough, and put the large volumes of cement composition with hands, it will have to do it fractionally. It will take about four or five zones.

Do not forget when making garden vases with their own hands and about drainage. It is done, putting a plug on the bottom, wrapped in a film.

You can make this vase multicolored. To do this, the cement mixture is divided into parts. They add different dyes. The multicolored mixture is placed on the inner surface alternately, which makes the ready-made container of motley.

After the whole surface is lined with a mixture, the product is closed cellofan film And leave about ten days. During this time, the cement mixture will freeze and gain strength. If the product dries too fast, it will be necessary to moisten it.

Eight days check availability. To do this, tapping on the surface of the cement. If the sound is negligent, then the vase is removed from the form along with the film.

After treatment with a brush, the vase is washed with water and dried slightly. Further, his words are wrapped with a film so that the mixture continued to harden.

After about a week or two material will acquire a lighter shade. This is a sign that the film is time to shoot, but to put the Vase to the final place.

Small cement vases

From such a cement mixture, you can make small vases with your own hands. For them take any forms. It can be old fruit vases, flower pots and buckets, basins and dishes. Manufacturing technology is the same as for a large vase.

Vase on a leg with a curly surface

To perform such a flower vase, a mixture of the following components are used with their own hands. Take one piece of gray cement, one part of the vermiculite and two parts of the riding peat.

As the basis take a wire fire frame and a five-liter plastic bottle, which is trimmed at the desired height.

The frame from the fan is lined with a film. It will take three layers so that the mixture is not allowed between the rods too much. After the mixture is freezing, the original carved surface will be obtained. It should only be slightly treated with a metal brush and the vase from cement is almost ready.

Vasons of automotive tires. Instructions are step-by-step

To decorate the household plot, you can use practically stray materials, for example, old car tires. To make tire vases with their own hands, you should choose the source material of the desired size. It is best for the creation of carved products a winter unwanted rubber suitable, which is softer and thin.

tire Vasons with their own hands. Photo

Consider how to make a tire vase with your own hands similar to a flower. To do this, first with chalk paint the contour on the side of the tire.

When the petals are cut on the tire make small longitudinal slots. They are at a distance of five or ten centimeters from each other and facilitate the process of turning the tire.

Remove the product is not easy. This requires physical effort, but after a small plot is turned out, the process is accelerated.

After that, it remains only to decorate the finished product. There are other options for the manufacture of tires from the tires with their own hands.

Vase for a garden from plastic barrels with their own hands

From a large barrel one hundred and fifty liters, two tanks can get at once. To do this, in the middle of the barrels mark the place of the cut by which they are saw into two parts. lobzik.

The edgesprocessing with a special tool so that there are no burstles.

Outside to the bottom attach two bruckSo that the Vase is easier to move.

The resulting workpiece is trimmed wooden planks. They can be placed online or flashes.

Nails are clogged with a special pistol. From the inside, they are raised by a hammer.

Top rim Make from dusk connected at an angle. Fasten it with nails and glue.

Wooden finish can be covered with varnish or painted in suitable color. Vase is ready to plant flowers in it.

Silicate blocks with multiple tiers

This embodiment looks spectacular and makes even the most familiar plants unusual.

The cavities inside the blocks are excellent for planting and growing plants. Some manufacturers even began to produce special hollow elements for landscape design.

For the manufacture of street vases from silicate blocks, with their own hands it follows think up designSo that it was stable and had enough space for plants. Next, the necessary material is purchased.

In blocks should be drainage, So that excess water leave. The base is chosen quite strong.

The base is glued to the bottom of silicate blocks. Then the design is collected from the resulting elements. Blocks with each other are connected using glue.

Gradually building tiers, it is necessary to fill the ground.

Small vases from sticks

Read more for work thin sticksFor example, from ice cream. They are glued to wooden lamp.

Repeating processes make another three sides.

Then stick sticks on top of two sides.

The surface of the resulting container is polished and stained.

It turns out a small romp, which put the container with flowers.

Polyfoam Vazon do it yourself

Polyfoam common material and people often interest how to make a vase with their own hands from it.

First drink rectangular billets For walls that are connected by glue by self-draws. Then the container is covered plastering mix In several layers with reinforcement by plastic grid. When the mixture is dry, the surface is cleaned with irregularities. The next stage is painting. After that, the finishing layer of decorative plaster is applied. The product looks like cast from concrete.

Vase from the pallet. Master Class

Make a garden vase with their own hands wooden pallet. To do this, it is gently disassembled on the boards.

All boards having a length of 80cm, we saw in half. The boards with a length of 120cm, mark on three parts of 38cm and cutting, making a mowed slice at an angle of thirty degrees.

Boards with slices connect using self-tapping screws. It turns out a hexagon. To each of his board we attach the leg.

Similarly, we collect the second hexagon.

We collect the bottom of the vase. For this, between the legs, fasten the transverse board. It is placed on the bottom board and freamed them to the edges of the hexagon of self-draws.

It turns out a robust design, which should be processed by an antiseptic. It can be decorated with any ways.

Cement and fabric vases with their own hands for the garden - the original find, which is able to decorate any naudal landscape. Despite the fact that they appeared in the household courtyards only a few years ago, the history of the existence of such elements of the decor began for quite a long time.

The use of street vases made of concrete, in landscape design goes back to the ancient garden and park arts, the works of which were placed in the palaces. In the front alley and parks, the mandatory attribute were exquisite bowls made in the baroque style. We gradually such vases began to occupy an honorable place in landscaping of urban parks and gardens, public buildings, parade. Concrete street flowers are widely used to decorate entry in housing, sites intended for recreation, open terraces. In the gardens, they perform the roles of small architectural forms - their use in the landscape allows you to slightly dilute the monotonous unity of the green grass carpet and create attractive visual accents.

Show all

Production of concrete products

To independently make concrete florals, you will not need special time-consuming actions.It will be necessary to preserve ingredients for the manufacture of the working solution and choose the container where the concrete will suffer. Pick up forms with which the product will be performed.

Decorative vases for giving with their own hands make it not so difficult if you have a fantasy and the desire to create. Wonderful garden decorations are performed in any forms - they can be made of round or square, rectangular, abstract.

There are many materials that are suitable for casting. These are plastic bottles with different capacity, and children's rubber balls, and thase from metal or plastic. Amazing beauty can turn out potatoes from fabric and cement - you can create a real masterpiece with your own hands.

The first flower beds of fabric and cement probably turned out by chance. After all, many people after repair are simply thrown into a dump Impregnated with a cloth with cement mortar. But if you slightly put on the cloth and fix it with the help of a solution, it will turn out unusual and very beautiful.

How to make a compartment for flowers

The simplest variant of the concrete floral can be obtained as follows:

1 Choose the necessary materials. In addition to the concrete solution, you will need old towels (terry or wafer) or a piece of any dense tissue of the desired size. To begin with, you can take an unnecessary bucket. Also need a piece of polyethylene. When carrying out work with cement mortar, protect your hands with gloves.
2 Cement Take water to a consistency resembling liquid sour cream. A bucket on which you will dry the vase, turn up the bottom and wrap with polyethylene, otherwise it will be not easy to remove it after hardening the mixture. Towel immerse in a container with a cooked solution. Then get it and straighten it. It should be impregnated with a mixture, without a residue, do not leave dry spots on it.
3 On the tilted up the bottom of the bucket, throw the towel, then the bottom is better thank it so that there are no folds, otherwise the future vase will turn out to be unstable. Reflect the falling folds of the fabric as you like it more. Leave the resulting design for a couple of days. After hardening the fabric, remove the outward bucket. Here is your floweque and ready.

You can make a vase for the garden with your own hands exactly what you have thought it. The resulting product can be painted with bright colors or just leave as it turned out.

How to decorate your vase?

If you liked the idea of \u200b\u200bmaking ornamental flowers and you want to build such garde pumps, you can safely begin work. Needleworks always attract a lot of attention, they can be proud to show friends and acquaintances. But sometimes you want something more unusual or bright. Homemade florals you can decorate as you want.

For example, you may not like the rough outer surface of the homemade vase. You can, after a small alteration, turn it into a glossy. To do this, in the manufacture of the mixture, select the cement and sand of small fractions or add to the mixture dry rotband plaster. For breeding the mixture, use silicate glue instead of water.

Polyethylene is used to form a glossy surface. The main method of manufacturing will be needed by the following additions:

1 Prepare a big tight piece of cardboard. There is a greenhouse concerning material on it and straighten up so that all the folds turn out to be smoothed.
2 After impregnating the tissue with a solution, it must be spread on the cardboard and disclose well so that the towel is better to the surface.
3 Then the center is installed in the center, which is selected to create a bucket form, after which the entire design should be neat and very quickly turned over, while holding the cardboard. The fabric at the same time should flip the bucket along with the film.
4 Form the folds of the future product to your liking. You can not do deep races - it will be difficult for you to get the film. From the already frozen design, you can try to smear the lighter stuck pieces of the film.

The desired gloss was obtained, but small defects remained on the product. How can this be fixed? Take a silent and wake the creamy vase with silicate glue, without diluting it. So you can hide all admitted defects. In addition, you can additionally be mixed in the adhesive - so you get the pot of the desired color and add it the outer surface of the shine.

Printed option

In the process of manufacturing a vase, you can make a decoupage. To make an outer decorative layer, you will need a thin printed fabric or loose paper with a pattern. For example, wallpaper, old newspapers fit well. No need to use glossy magazines, posters, vinyl wallpapers.

In making a sequence of actions, the same is observed as when performing a glossy surface. You just need to add a layer with a pattern. The phased procedure is as follows:

1 Cardboard with a film is flawed with silicate glue. Fabric, newspapers, wallpapers selected for drawing are applied to it. Everything is smoothed.
2 The root side of the paper material is labeled with silicate glue. The glue must be good to impregnate the material - it will take about 10 minutes for this. If dry plots remained, scrape them additionally.
Three fabric impregnated with cement over the picture. Everyone needs to be disclosed well, then the cardboard with the received "sandwich" is knocked over to the shape and leave to harden. Plates to straighten.

If, after drying the form, you left the protrusions unnecessary to you, they should be trimmed with a hacksaw. Formed roughness, it is possible to sand with a large emery mesh - it is easy to find in business stores.

How to make a solution?

So that the vases are beautiful, the manufacture of the working solution is desirable to pay more attention.

This will provide it with the desired density and the speed of frost.

To obtain a concrete solution for work, the following substances are needed:

gravel shallow fraction;
sand;
cement;
water.

Portland cement fits well, white cement. Gravel to choose a fraction of 3-7 mm, the sand is suitable small-grained. Everything is mixed in the tank in the ratio of 2 part of the sand, 1 - cement and gravel. Water is added in small portions before receiving the consistency of the liquid sour cream.

In order for the finished product of it is lightweight, a small ceramzite is added to the knead. When using such ingredients, part of the gravel is better replaced by it.

Forms after the fill must be covered with a film or wetted fabric - the hardening is thus coming much slower. So you can prevent the formation of cracks when the concrete is drying. The design must be disassembled no earlier than 3-4 days later. The surface of the resulting product is removing using the brush and skins, roughness cut.

You can independently prepare a material that is imitation of tuff or sandstone. For this prepare a solution of 1 part of cement, 1 - sand, 2 - peat. Dilute a mixture with water until the consistency of potato mashed potatoes. With the help of modeling mass attach the necessary shape. You can use art concrete for cooking - it allows you to make durable, elegant and lighter products.

How to paint the porridge beautifully?

It is most convenient to make concrete caspo with staining. Acrylic paints are suitable for this: they are most resistant to atmospheric influences. It is possible in the manufacture of a concrete mix, add coloring pigment to it.

The product in front of the color is dried and applied primer. So that the painted Vase looked beautifully, the colors are better to choose not very bright, close to natural - the main point for focusing the view should be plants inside the porridge, whose task to create a natural framing is. You can arrange a decorative painting on the surface in several colors, a vegetable composition, a geometric pattern, abstract patterns.

How to prepare soil and plants for ornamental flowers

A layer of gravel, ceramzit, crushes - for drainage are poured on the bottom of the concrete. A layer of nutrient soil is embanked from above, which should include trace elements and mineral additives. In the soil for annual colors there should be many organic matter. To ensure organic fertilizers, peat, compost or overwhelmed manure contribute to it.

Those dacifics who are seriously going to grow flowers in street vases, you should know that before the onset of winter time it is necessary to cook flower shoes for the next season. In winter, in frosts, the soil is completely freezing in vases. Therefore, in order to create flower arrangements in homemade caspo, it is better to choose annual plants.

It is easy to paint the seedlings of annuals with your own hands. In flowerals to achieve the desired effect, plants are plants with bright color and leaves with decorative appearance. It may be velvets, dahlia annual, Begonias, Koleus, Lion Zev. A good visual impression produce ampellast plants - it is nasturtium, petunia, nasturtiums. In concrete vases, you can thicken a landing in order to quickly reach the desired effect. It should be understood that with such a small volume of the Earth, it will quickly dispel, sheer wheels are required regular.

In flower jackets you can place replaceable compositions. In the spring, it is better to be better made up of a gloring bulbous plants - it can be daffodils, hyacinths, crocuses, tulips. Cineraria, lavater, Viola are suitable for summer compositions. In the fall, beautiful flowering is provided by Astrami, heliotrops, petunias.

Dacha still associated with potatoes or tomatoes? But more and more of our compatriots refuse the garden and heavy physical work in favor of the comfortable recreation and beauty of the country area. As a rule, the process of landscaping of the preservation area requires significant capital investments, but they have a real alternative. Vaccine garden for pocket to each dacket, it is able to revive even the most diverse landscape. Correctly pick up the colors for vases will help the secrets of landscaping landscaping.

The advantages of breeding flowers in vases

Value flower growing has ancient origins. Today, like a few millennia ago, people grow plants in pots or special containers.

The container garden without problems can be placed even on a small indention, for this not need large areas. Green pets in vases perfectly look at the paving slabs, cement coating, in the courtyards and on the porch at home.

Pots with flowers can be placed at different levels due to the use of shelves, supports and steps. If you wish, they are easy to move from one place to another.

Plant care does not require great physical effort. They are not afraid of the Medveda ordinary, the larvae of the May beetle and other pests living in the ground. In the photo, flowers in vases look not just a decorative background. They give the charm and charm to all that surrounds them.

Flowers will decorate any corner of your home

By using special substrates, any flowers can be breed in containers, even those that are not suitable for the soil of your country area.

Vases can be used to mask flaws or unsightly objects. To do this, it is enough to put a luxurious flower in the right place.

Unlike stationary flower beds, there is always the possibility of replacing plants that beat away, others.

Such a garden has unique mobility. It is easy to transport to another cottage, place on balconies or balconies of your own urban apartment.

What flowers to plant

Ideal colors for street vases are ampeline petunia, Pelargonium and Fuchsia. The variety of forms and colors of these plants allows you to create elegant floral compositions.

So that ampel petunias rejoiced eyes long, do not forget to remove dried flowers

It should be noted that petunias are quite capricious colors, which are only experimental flowers. The ownership of agrotechnical techniques and strict observance of the rules of care will preserve the delightful appearance of this decorative plant.

The main advantage of the popular Pelargonia in European countries is its enviable endurance.

The best places for fuchsia are shaded alleys. This plant is not placed on outdoor sunny areas.

Fuchsia is a great option for a suspension vase on a shaded terrace

Such plants are suitable for growing in pots:

little velvets;
daisies;
pansies;
coles;
dwarf dahlias;
begonias;
lobelia;
lion zev dwarf varieties;
an equalistic bell;
barwin;
chlorophytum.

In the spring, you can decorate your garden with blooming crocuses, daffodils or tulips in pots.

Bulbous plants after flowering need to be removed into the cool room

Containers are ideal for spicy herbs, such as basil, Melissa, Rosemary and Mayran. The "highlight" of the garden can be figurinely trimmed vocal shrubs and trees.

Flower landing technology in drafts

To flowers in containers (street vases) have long delighted you with their beauty, you must consider a few simple rules.

If you wish in a vazon you can create a mini alpinary

Features of care and pest protection

After the flowers are planted, they need regular care and watering.

It is important!
Container plants are better to water a moderate amount of water. Do not forget to break the soil often to provide access to their roots.

Flowers in vases need additional feeding. To do this, mineral fertilizers are used:

granules (characterized by a slow action, it is enough to make 1 time per season);
solutions (feeding is made during watering, the recommended frequency is 1 time in 10 days).

It is necessary to remove dried inflorescences in time. This allows you to improve the appearance of plants and prolongs the period of their flowering.

Heat-loving species (fuchsias, pelargoniums, coles, etc.) for the winter you need to transfer to the room with a temperature not lower than + 5 ° C.

Perennials can be left to winter in the garden. Protect vases and their contents from frost will help straw and jut tissue.

Pelargonium in pots will decorate your garden with its flowering at least 3 years

The main enemies of the vocal plants are the whiteflink and the web tick. With these pests can be combined with chemicals. In addition to lepicides, Haouxin and cytoxibatsillin, spraying is often used or garlic extract.

With proper care, flowers in the vases grow beautiful and healthy. Let your work and fantasy pay off the beauty of the blooming garden!

Gently organize plants in the country easier than it may seem at first glance. Make outdoor vases for any colors really just for one weekend with your own hands. At the same time, the necessary materials probably already have at hand. You need simple step-by-step instructions in the article below.

We make concrete vases step by step

Concrete vases - the most common street version. They fit well into any directions of landscape design.

Ensure such vases easily and simply, and the limitation in size and forms depends only on your imagination. Follow the simple instructions below.

Necessary materials

plastic containers (such a size and shape, what you wish to see future vases);
vegetable oil;
good concrete mix;
drill;
concrete drill;
master OK.

Getting to work

Plastic containers must be made of thick plastic, and keep the shape in the process of pouring concrete. Thin and shaky walls of the fragile container can be brown, and the vases will come out a bizarre form (although it can be written off to an individual designer solution).

Tip! It is necessary to choose a concrete from a thin grind cement for your vase. The concrete is not suitable with the addition of large pieces of stone (gravel or rubble), as the final appearance can not be very aesthetic.

Very generously lubricate the walls of the container with vegetable oil so that it is later easily extracting frozen forms. Do not be afraid to overdo it: you have to have much worse if you do not get the oil and concrete to the walls.

Filling solution in forms

Fill the mixture into the container, and now put another smaller diameter in it. A smaller container must be lubricated with oil from the inside and outside. You can put another solution into a small container, and in the middle another smaller.

And so as long as space. The last container fill in pebbles for weighting. What it looks like, look at the photo below.

Spite the surface of future vases well. Leave them to dry for a day. After pulling out the concrete from the containers, gently shook. If you have not been lazy enough to lubricate the oil containers at the beginning, the form will be easily removed.

How to make a pot drainage?

Leave the ready-made vases to stack another week so that the concrete grabbed and was ready for drilling. With the help of a drill on concrete, you drill the holes from the bottom for drainage.

Put the plant in the vasons to your own taste and safely decorate the country's country.

Fabric and cement vases for street or yard

Another interesting decision of the country landscape design is curly vases from fabric and cement.

What materials do you need?

To make them yourself, prepare the following materials:

dry portland cement (or other fine grinding);
scrolls of cotton fabric;
capacity that will serve as a basis for drying composition (for example, an old bucket);
polyethylene;
thin wire.

Fabric base for a durable vase should be:

dense and unpretentious;
absorbing;
sufficient size to accommodate the desired plant with roots.

The color of the value does not have, since the concrete coating will not leave a trace from the initial print. Therefore, boldly let me flow into the garden vases unnecessary faded towels, tablecloths or curtains. Synthetic is not suitable.

Step-by-step instructions for work

Prepare a frame: Wrap a bucket or other polyethylene container and secure the wire. Encounter fabric, and cut extra pieces, if necessary. If smooth shape of the edge of the vase, the fabric corners are rounded.

Photo selection:

Prepare a cement mixture according to the instructions on the package. Getting well in the cloth in the solution, and cover the bucket so that it turns out a beautiful vase. Roll into the folds of your artistic taste.

Leave the product to dry out for a few days. After remove from the foundation, turn over and let me dry out another day or two before you make holes for drainage.

What to put in Vazones standing on the street?

After the man-made vegetables for plants are ready, it remains to decide which flowers to plant in the vases in the country to bloom all summer.

Try to plant something from the list below:

Perennial marsh hibiscus.
Petunia.
Qinnia.
Character homophren.
Feverweed.
Day-lily.
Iberis evergreen.
Purple Echinacea.

Do not forget to consult with a specialist in a dacnis store, because each of these plants requires separate approach. But they will certainly be happy to please you with blossoms of the entire summer season, and will decorate the vases that you did with your own hands.

Step-by-step video instructions

We also offer you to see some videos on the topic of the article. Of these, you will hand over even more ideas, as you have to equip a country space.