Manufacturing and installation of cabinet doors. We make doors for the wardrobe on our own

Front part of the wardrobe wears not only a practical function, but also a decorative one, decorating the interior of the room, and with the right choice - even visually expanding it. The full right to choose is offered by our catalog, in which the most common materials for wardrobe doors are widely presented.

Chipboard

Chipboard doors have an incomparable advantage over other options - they are the cheapest. But the price is not their only advantage. The advantages of this material also include:

• ease;
• strength;
• moisture resistance;
• attractive appearance;
• a large selection of patterns and colors.

They will not fade or crack. They will look appropriate in rooms with a minimalistic design, but will not go well with an expensive interior.

Lakobel

This material is glass, painted on one side in a rich opaque color. The lacobel facade is distinguished by its richness and uniformity of color, resistance to moisture and an unlimited service life. Many customers opt for it because of its brightness and reliability.

Glass

Glass doors will visually expand the space, so this is the best solution for a cabinet that will stand in a small room. The cost of the material is also low, so glass usually competes with chipboard when choosing a budget option for the facade. However, glass has one characteristic that should not be forgotten, and that is fragility. This point should be taken into account if there are children in the house.

Photo printing

Photo printing allows you to apply all kinds of drawings on the cabinet doors - from landscapes to a photograph of a person. Photo printing is applied to a glass base, that is, in fact, these are the same glass doors, only in this case there will be not a mirror on the facade, but a naturalistic drawing.

Sandblasting drawings

They are applied to glass with a thickness of at least 4 mm, thus forming a rough surface. For application, sand is used, which is applied by a jet using a special technology using a stencil in a special chamber.

Sliding wardrobe doors are an important part of sliding furniture. They form an aesthetic facade, decorate the room and prevent dust from entering the interior of the cabinet.

A wide range of materials are used to fill the door. Often chipboard, MDF, glass, mirror are used for this purpose. There are also rare and exotic finishing materials - bamboo, rattan, natural solid wood, and so on.

The assembly technology and the device of sliding doors make them a universal attribute of a house or apartment. They can serve as part of a cabinet front or interior partition. Moreover, in each individual case, the design should be as practical as possible. There are a number of sliding door systems for this. They differ in appearance, type of profile, method of attachment, presence of a threshold, and so on.

Door design for wardrobes

Various materials are used to fill the doors of the wardrobe. The greatest popularity belongs to chipboard and MDF. With the help of fiberboards and panels, real masterpieces of design are created.

Sliding wardrobe "Armadio"

Sliding wardrobe "Shine"

Sliding wardrobe Lady

A photo of sliding wardrobes is presented in our photo gallery.

We offer you to familiarize yourself with a number of ready-made solutions for the design of wardrobes. In the photo gallery, sliding wardrobes are presented, which differ in:

• the number of doors (two or more);
• purpose (nursery, bedroom, living room, hallway);
• the presence of elements of glass and mirrors;
• the color scheme of the facade and profile;
• style (classic or modern style);
• internal filling;
• type of building (built-in, cabinet wardrobe);
• the presence of open shelves;
• decor (photo printing, sandblasting, etc.).

Examples of modern design will help you decide on the appearance of furniture and gain new design ideas.

A well-developed network of official representatives allows you to buy profiles and filling for compartment doors at wholesale prices. And many of the companies provide an opportunity to place an online order with delivery.

3D wardrobe - convenient visualization of future furniture

The program is a convenient free application that can be downloaded to a PC or laptop in the appropriate section.

Advantages of calculating the door system using a calculator:

• the program does not require an Internet connection;
• no special skills required;
• the proprietary calculator contains all the colors and types of profiles available on the site;
• the program is updated when new systems appear in the range.

To use the program, just click the "Download" button and follow the further instructions.

Video instructions for assembly and installation

To easily and easily install sliding furniture or a partition, just watch the video on assembling the doors of the sliding wardrobe. Depending on the type of system (top-hung, bottom-supported, non-threshold) doors can be installed:

• directly into the closet;
• in the doorway.

Calculation of the size of the doors of the sliding wardrobe systems "Ramir" and "Universal"

Assembly and installation of doors for sliding wardrobes of the "Puerta" system

More videos on the step-by-step assembly and installation of various door systems are presented in the corresponding section.

For each individual case, there is a specific video with instructions.

Before installing the system, it is extremely important to calculate the correct position of the doors. In the videos, you will also find instructions for measuring openings and niches. Thanks to video instructions, you can cope with any task:

• taking measurements;
• door assembly;
• door installation.

The videos detail the options for fastening doors of various systems.

Filling the doors of wardrobes with MDF

One of the popular facade materials is MDF.

Doors for wardrobes, developed by experienced designers, using high-quality materials and fittings, have excellent characteristics. They work softly and quietly, contributing to the practical use of the available space in the room, as well as increasing the aesthetics of the room, making it more attractive and in line with the tastes of users.

At ADEM GLASS you can make an individual order for a wardrobe door, which will be made with high quality and taking into account the interior features of the room where it will be used. You can order either a full compartment door from one type of material, or combine a door from different materials. The page contains popular options for combining materials in compartment doors - choose.

Where to make custom-made compartment doors in Moscow?

Today, you can order the manufacture of doors to your size in different companies, but not all of them offer customers really favorable terms of cooperation.

Many clients choose ADEM GLASS because we offer:

1) Favorable prices. With us you can order a compartment door for your closet inexpensively. The cost of our products starts from 3,600 rubles.

2) Professional approach. We have been in the market for over 20 years, and every year we are improving our service.

3) Quality assurance. Due to the use of only high-quality consumables in our work, we can guarantee that all our products will serve you as long as possible.

4) High speed of work. We quickly manufacture doors according to your dimensions and deliver finished products in Moscow to the address specified by the client.

5) Large selection. We are chosen because our assortment includes a huge selection of glasses and mirrors with and without drawings for making a door, so that it is guaranteed to fit into the interior of your room, hallway, dressing room. The main advantage of our glasses and mirrors, which we use in wardrobe compartment doors, is that the pattern is applied by chemical etching, which visually looks presentable and more expensive than, for example, sandblasting. Here you can choose an insert for a cup door
e with any pattern, both classic and modern: geometry, floral patterns, monograms, feathers, just plain painted glass or even an aged mirror - which looks just incredibly beautiful in the compartment doors!

6) Practicality. In production, we use glass and mirrors with patterns or painted glass, which retains its consumer properties for many years, for example, compared to sandblasting.

You can independently verify all the advantages of cooperation with us by ordering the manufacture of a door, and we will do everything necessary to make you a happy, satisfied customer!

Contact us, we will be happy to advise you on all issues of interest and calculate the cost of manufacturing a door for your cabinet.

The website contains retail prices. If you are a furniture maker, ask the manager for wholesale prices for sliding doors by phone: + 7 499-110-62-63.

Sliding wardrobes, which were not so long ago considered completely exotic interior items, which could only be seen in glossy catalogs or in very "rich" apartments, gradually entered the everyday life of the average family. Such furniture designs combine practicality, spaciousness, and economy of useful space, and plus to all this - they fit very well into the interior of the room, often becoming its central design element.

And yet, if you look at the price lists of firms engaged in the manufacture and installation of wardrobes, sometimes the prospect of such an acquisition looks somewhat frightening. Therefore, many owners who know how to hold carpentry and metalwork tools in their hands have questions - is it possible to make such a piece of furniture on their own? It turns out that this is quite possible. The biggest challenge is the sliding door structure. However, this should not scare you - in specialized stores you can purchase special kits-systems that will help you assemble beautiful and functional doors for a sliding wardrobe with your own hands, of course, if diligence, accuracy, and a clear sequence of all technological operations are applied.

What is included in the kit for wardrobe doors

This article will not consider the installation process of the cabinet itself with shelves, side walls, drawers, etc. The essence is completely different - the defining element of such a piece of furniture is precisely. By and large, no matter how paradoxical it may sound, a wardrobe may simply not even be a "wardrobe" in the literal sense of the word.

Various options for sliding wardrobes, which sometimes are not even "wardrobes"

So, with a movable door structure, you can fence off a long niche in the wall, placing in the resulting space, both ordinary shelves and racks, bedside tables, etc. Often, such a partition separates the end part of the room, along its entire width, from wall to wall, and in height - from floor to ceiling. And the resulting mini-room can serve as both a spacious closet and a storage room, and sometimes even a small study. A similar design is also used for installation in the corner of a room or hallway - as a result, a triangular "closet" appears at the disposal of the owners, which can be used both as a closet and for other needs, for example, even for "home parking" of a bicycle.

In short, the options can be innumerable. But they all have one thing in common -. Correctly mounted doors effortlessly move along their guides, alternately allowing one or another section of the "cabinet" to be opened, and in the closed position, tightly, without cracks, adhere to the vertical planes framing the structure.

Wardrobe doors

It should not be assumed that numerous local firms engaged in the manufacture and installation of sliding wardrobes are using any of their own designs or mechanisms. In the overwhelming majority of cases, ready-made systems are used for this, which can be easily purchased in furniture fittings stores. Usually they represent a certain set of metal (more often - aluminum) profiles and necessary components: roller mechanisms, plugs, gaskets, jumpers, fasteners, etc. These systems help to assemble the frame structure of the doors and the mechanism for their movement, but each master is free to choose his own internal filling - mirrors, transparent or tinted glass, plastic, laminated fiberboard or MDF and other materials.

There are many such systems for sliding wardrobe doors. They can differ in the configuration and material for the production of profiles, the principle of assembly of parts, the level of complexity of the roller mechanism, the adjustment system, etc. Our publication will consider the "Aristo" system, as one of the most popular, which has proven its reliability, and is quite simple in self-installation. In addition, it is pleasant to realize that these are products of our domestic manufacturer, which have won recognition abroad as well.

Aristo profiles are made of primary aluminum, have a precisely adjusted geometry, which allows you to assemble door structures with high precision. The system implies sliding doors, the load from which falls on the lower roller. It is equipped with a metal rolling bearing that does not require lubrication during the entire service life, and provides a smooth and quiet movement of the leaf along the guide without the application of large forces. The upper rollers play a stabilizing role, keep the web in an upright position and ensure its smooth movement relative to the upper guide.

The manufacturer of the kits claims that the resource included in the mechanism, if properly assembled, will be enough for one hundred thousand (!) Cycles of closing and opening - a more than impressive indicator.

The manufacturer offers a wide range of color designs for aluminum profiles - it is possible to mount a structure that fits perfectly into the interior without standing out, or, conversely, contrasting sharply against the general background.

The wood-like profiles are covered with a high-strength double-layer laminating film, and the monochrome details get their own shade using the anodizing technology.

Aristo profiles allow manufacturing sliding doors filled with glass (4 mm thick), glass composition with plywood or fiberboard (6 or 8 mm thick) or chipboard, MDF panels (10 mm thick). The maximum door dimensions can be: up to 1500 mm wide, up to 3300 mm high, the permissible weight of one leaf is up to 160 kg.

What are the main components included in the "Aristo" system (an option with guides for two or more leaves is being considered):

№№	Illustration	Dimensions (edit)	Short description
1.			Side stand-handle, open type, asymmetric, profile C.
2.			Side stand-handle, closed, symmetrical, profile H.
3.			The upper guide profile (track) is two-track.
4.			The lower guide profile (track) is two-track.
5.			Upper door frame. The channel for screwing in the assembly self-tapping screw is clearly visible.
6.			Bottom door frame. The same mounting channel for the screw, and the high profile flanges create a niche to accommodate support rollers.
7.			Middle door frame without additional fixing with a self-tapping screw. It is used when using several filling fragments in the case when no reinforced fixation of the lintel is required - it will be held by the filling panels (for example, if rigid chipboard or MDF 10 mm boards are used).
8.			Middle door frame with self-tapping screw. Able to give additional rigidity to the door frame. It is advisable to use it when using glass or mirrors filling as fragments, or with significant dimensions of the entire door leaf structure.
9.			Direct focus. Optional element. It is used for framing the vertical sides of the opening in the place of their abutment to the walls.
10.			Shaped emphasis. Optional element. It is used for framing the vertical sides of the opening if they are walls made of chipboard panels.
11.			P-profile. Optional element. It can be used for framing the ends of the chipboard panels used during the installation of the cabinet structure, in the places where they adjoin the floor, ceiling, walls.
12.		-	Top roller, symmetrical. It is used when using closed vertical profiles H.
13.		-	Upper roller, asymmetric. It is used when using open vertical profiles C. A set of two rollers is required for each sash.
14.		-	Support roller with an adjusting screw. A set of two rollers is required for each sash. The adjusting screw AB74 has a 6 mm socket head.
15.		-	Assembly screw AB75, with self-tapping working part. The head is for an internal hexagon 6 mm. One screw for each joint.
16.		-	Spring stopper. Optional element. Provides door fixation in the closed position.
17.		-	Silicone rubber gasket. It is laid along the perimeter of the door filling inserts. It differs in size - a seal is available for inserts of 4, 6 and 8 mm thickness. When using a filling with a thickness of 10 mm, the seal is not used.
18.		-	Schlegel is a self-adhesive strip made of plastic and lint. It is glued along the entire height of the door leaf from the end part - for this, a special groove is provided on the C and H profiles. The Schlegel softens the impact of the sash on the cabinet walls, and prevents dust from entering when the door is closed.

There are several more items that can be purchased at will - door closers, magnetic stoppers, locks, end caps for profiles, etc. But they do not directly affect the process of assembly and installation of wardrobe doors under consideration in any way.

The principle of assembling doors for a sliding wardrobe with the "Aristo" system

In the configuration of profiles and hardware elements of the Aristo system, everything is thought out, therefore, the installation of the door structure should not cause great difficulties.

A schematic diagram of the assembly of one door leaf with vertical profiles of type C is shown in the drawing. Hereinafter, the numbering of the profile and hardware elements is observed in full accordance with the detailing table above.

Profiles 3 and 4 are fixed to the ceiling (cabinet lid) and floor (cabinet base), respectively, and are stationary parts of the system.

Installation of the door leaf structure is carried out using assembly screws (pos. 15). # 14a shows the lower support roller adjusting screw.

The drawing does not show a variant of the central horizontal jumpers, if necessary. But their installation is fundamentally no different. They are either simply inserted without additional fixation (on the vertical posts from the inside there are special sides for precise centering), or they are fixed on the assembly screw according to the same principle as the upper crossbar of the door.

Below is an assembly drawing for an option using a vertical profile of type H.

There is no fundamental difference - it's just that a different, symmetrical type of upper rollers is used for these profiles. True, there will still be differences in the calculation of the dimensions and in the installation of the upper and lower guide profiles (runners).

Calculations of the dimensions of the doors for the wardrobe of the "Aristo" system

The assembly of the door will only turn out to be of high quality if thorough calculations, down to the millimeter, are carried out, and a very careful preparation of the parts will be made according to the dimensions obtained. No negligence, calculations "by eye" are not allowed - this will necessarily lead not only to an inaccurate look, but also to distortions and even jamming of the door structure.

Calculations are carried out in the following sequence:

• The exact dimensions of the opening in which the door structure will be installed are determined.

The diagram shows the wall structures, the floor and the ceiling, but it can also be the walls of the mounted cabinet - the principle does not change from this.

Initial dimensions - the length and height of the opening in which the movable door structure will be installed

At the output, we have two values: the length of the opening - Lp and its height - Np, from which further countdown will go.

It is extremely important to pay attention to the fact that the upper and lower boundaries of the opening must be strictly horizontal along its entire length. If the deviation from the side walls from the vertical, although extremely undesirable, can still be somehow compensated for by decorative trim, then even small deviations from the horizontal will lead to looseness or jamming of the movable doors.

Often, in order to compensate for small irregularities in the floor and ceiling, and to facilitate the further fastening of the guide profiles, flat panels (strips), for example, made of chipboard, are mounted above and below along the entire length of the opening. In this case, the height of the opening is measured after the installation of such pads, or their thickness must be taken into account - subtracted from the total height of the opening.

• After measuring the opening, you can immediately get the height of the door structure, that is, the length of the required vertical handle profiles (1 or 2).

Regardless of the type of profile, it is always equal to

Нд = Нп - 40 mm

• Opening length Lp immediately gives the length of the profiles of the lower and upper guide (3 and 4).

There may be a nuance here. If you plan to install a frame from a straight or shaped stop (profiles 9 or 10), then the length of guides 3 and 4 will decrease by 3 mm (1.5 mm on each side due to the thickness of the frame).

Ld =Lp - 3 mm

The length of profiles 9 and 10 is always equal to the "net" height of the opening Np.

• The next question is the width of the door leaf.

This indicator depends on the total length of the opening and on the planned number of movable sashes, and on the used vertical profile-handle, and even on the presence or absence of a Schlegel.

With significant lengths of the opening, you should not chase the large width of the door leaves - they turn out to be too massive and not very convenient to use. On two-runner guides, it is quite possible to place two, three, four and even five leaves. Despite the fact that even 1500 mm is allowed, they usually try to adhere to the width of each within 750 ÷ 900 mm.

Initial value for calculating the sash width ( Lc) - opening length Lp and the planned number of flaps.

For calculations, the following ratios are used:

	Schlegel presence	Profile C	Profile H
2 sashes	- without schlegel	Lс = (Lп + 25) / 2	Lc = (Lp + 35) / 2
	- with schlegel	Lс = (Lп + 15) / 2	Lс = (Lп + 25) / 2
3 doors	- without schlegel	Lс = (Lп + 50) / 3	Lс = (Lп + 70) / 3
	- with schlegel	Lс = (Lп + 40) / 3	Lс = (Lп + 60) / 3
4 doors	- without schlegel	Lс = (Lп + 50) / 4	Lс = (Lп + 70) / 4
	- with schlegel	Lс = (Lп + 30) / 4	Lс = (Lп + 50) / 4
5 leaves	- without schlegel	Lс = (Lп + 100) / 5	Lс = (Lп + 140) / 5
	- with schlegel	Lс = (Lп + 90) / 5	Lс = (Lп + 130) / 5

In order not to get confused in the formulas, we suggest using the built-in calculator, which will quickly calculate the required sash width

Functional and beautiful furniture is a guarantee of comfort and coziness in every home, therefore, the choice of such interior items must be approached carefully. But what to do if the store did not find a cabinet suitable for the design or size? Then the assembly of the wardrobe can be done independently. But for this, you should learn how to make doors for a wardrobe with your own hands, and then install them.

A sliding wardrobe is a system, the acquisition of which will make it possible to successfully plan the space of a room, emphasize the features of the interior, and solve the issue of storing personal belongings. As soon as such furniture appeared on the domestic furniture market, buyers immediately fell in love with it for a huge number of advantages.

Many people hesitate to assemble the closet on their own, but in fact it is not so difficult if you prepare and divide the work into stages. One should start by purchasing the necessary materials, the volume of which depends on the chosen size of the structure. Therefore, the first thing to decide is what material to use and what size the structure will be.

The following materials are used to create compartment furniture:

• Chipboard - belongs to the category of common and affordable materials for the manufacture of doors for a wardrobe. Chipboard is varied in color, practical, easy to cut. If you decide to assemble a wardrobe with your own hands without experience in such matters, opt for chipboard;
• MDF is a more expensive material than chipboard, but it has higher performance characteristics. MDF is afraid of moisture, under the influence of which the film can lag behind the base, which will significantly worsen the appearance of the furniture. But in general, the wardrobe with 2 doors from MDF looks very dignified;
• solid wood is a durable, incredibly beautiful, wear-resistant option. But it is not cheap, and only an experienced master of furniture can work with natural wood. If you are a beginner, it is better to choose a material that is easier to work with - chipboard or MDF.

The dimensions of a particular cabinet are selected for the room in which it is planned to be installed. Take a look around and measure to find out what length, width and height of furniture will be most successful. The height of such furniture may vary.

Models of non-standard sizes are made to order or independently. Experts insist that in small rooms the closet must be made as high as possible. This will allow you to fit the maximum number of things into it.

Facade options

Drawing and detailing

Today, sliding wardrobes are popular among residents of small-sized city apartments and owners of spacious country cottages, because they have high functionality, practicality, serve for a long time without breaking, and retain their external appeal for a long time. You can fit such a piece of furniture into almost any room in size and style. And in order to spend the minimum amount of money on this, make the furniture yourself. How to make doors for a sliding wardrobe and what is required to start assembling the doors of a sliding wardrobe? Drawings and drawing of details of the future design with an indication of where this or that fastening will be performed will significantly speed up the work.

Preparation of parts

To save money, many people are interested in whether it is possible to do without the help of experienced furniture makers and how to make do-it-yourself wardrobe doors. To begin with, the preparation of the parts to be installed is carried out. After the most relevant material (chipboard, MDF or natural wood) has been selected, accessories are purchased, you can proceed to work. You will need to create a reliable frame from pre-prepared parts:

• two side walls;
• lid;
• bottom.

Shelves and storage systems will subsequently be installed inside the structure.

A sheet of selected material is cut out using special equipment, which cuts out the described details of the future cabinet with high accuracy. If there are no special tools for this, you can order material cutting from professionals. After cutting, the parts are processed, covered with end plates to make them more aesthetically pleasing. Next, we will tell you how to assemble doors and get a complete piece of furniture at a minimum cost.

Sash construction without filling

Profiles can be different, therefore they must be measured individually

Assembly

When the details of the future design are prepared, you can begin assembly. How to assemble a wardrobe without mistakes? For this, a detailed diagram of the assembly and installation of the doors on the sliding wardrobe is created. Then, using a drill, you need to arrange holes in the sidewalls, roof and base. Its individual parts are connected into a single frame using special fasteners. To increase the maximum permissible load on the cabinet, the joints of the base and the top cover with the sidewalls of the structure are reinforced with special metal corners. The back of the furniture is closed with a thin sheet of chipboard, and supports are attached to the base.

You will also need holes for pins in the side walls of the furniture. This will be required for the subsequent installation of the shelves inside the product. If necessary, storage systems of a certain kind of things are mounted inside the structure: vertical bars with hangers, a trouser, and the like. If the assembly stage is completed, we proceed to the most difficult one. It is the installation of doors that will be the most responsible process in all work.

Assembly diagram

Installation of profiles and frames

If you have completed the assembly of the sliding wardrobe doors, you can proceed to the installation of the profiles and the frame of the structure, along which the sliding doors will move. However, a prerequisite is the setting of the door leaf exactly in level, otherwise, during the subsequent operation of the wardrobe, problems will arise, and the level of comfort for the user will be low.

Having measured the length of the cabinet from the inside, using a metal hacksaw, cut a profile of the same size and fix it on the top and bottom covers using a screwdriver and self-tapping screws.

In order to prevent damage to the profiles, during the organization of the holes, experts recommend using any convenient support. For example, you can use a table or chair for this purpose. And the holes made should be carefully sanded with sanding paper. The holes should be organized on the profile with a pitch of 50 mm, this rule should not be violated, so that there are no problems with the operation of the structure in the future.

To securely fix the lower profile, it is worth organizing similar holes for self-tapping screws, but you should not rush to fix the guide inside the structure. It is important to choose the right place for its attachment. It is shifted into the cabinet by 20 mm, since the depth of the furniture will decrease by the width of the compartment doors. Sometimes it happens that the doors are set too deep. This spoils the appearance of the furniture, reduces its aesthetic qualities and comfort.

You will also need to mount the latches so that the doors stop in the closed position and a gap does not form with the sidewall. The stopper is installed in the groove of the lower rail. To mount the retainer in the required place, the compartment doors are tightly closed, after which the wheel center is marked on the lower rail. A stopper is inserted here, which can be easily moved with a flat screwdriver.

To install the mirror in the profile, a silicone seal is used

The mirror is inserted into the profile frame

Three holes are made in the vertical longitudinal guides

Profile drilling

Frames are fastened together with self-tapping screws

The lower profile fasteners are also fasteners for the lower rollers

Fixing the rollers

The guides for the door leaf are fastened with self-tapping screws with press washers

Fastening doors

Next, we will describe in detail how the door of the wardrobe compartment is installed with our own hands. The order of the step-by-step assembly of doors and the correctly selected tools are largely determined by the type of door being made and the specifics of its fastening to the furniture body. It can be one of two models:

• suspended;
• rail.

Suspended

Roller

Suspended

If you made a decision to make hinged doors, then experts recommend installing doors on a sliding wardrobe with your own hands by studying the specifics of working with such systems. The 2-door wardrobe with hanging canvases has a special compartment mechanism, which is not mounted inside the structure, but is superimposed on the facade. It consists of two guides, but the highest load falls on the top rail. Suspended fastening of sliding systems allows you to disguise the ends, roofs of side facades from the eyes behind the doors. As a result, the structure after installing the cabinet doors looks incredibly laconic, elegant, beautiful.

Hanging door fixing

Rail

The description of the installation of rail structures with your own hands differs from the description of the stages for suspended ones. The peculiarity lies in the fact that the rails are mounted inside the cabinet frame. At the same time, the lower one should be hung a little with an offset inside the cabinet, since it will have the highest load.

You need to hang rollers on the canvas, with the help of which it will move in the rail. Next, the canvas must be very carefully inserted one by one into the pre-installed guides. To do this, put the upper part of the door into the guides, and then put the lower part of it.

To check the doors for perfect vertical alignment, use a spirit level. If you carry out the work carefully, the need for adjustment at a later time will disappear.

Experts insist that rail doors on the cabinet should not be placed at a corner, as this can provoke deformation of the profile. Whichever design is chosen, do not forget that limiters will definitely be required. Such a detail must be attached to the cabinet door.

The video provides instructions for the step-by-step execution of the work by an experienced craftsman, which will once again demonstrate how to put the doors on a sliding wardrobe. After looking through it, you will know exactly how to install the wardrobe door, and the instructions with the photo will help to facilitate this process.

Roller attachment