How to decorate the arch: design options for the design. Interior arch - an elegant element of the interior You can decorate the arch in the apartment

The popularity of arches, replacing rectangular door openings, boomed 15 years ago. Interior doors are demolished, right angles are cut until a semi-oval figure in the form of an arch is obtained.
Brickwork is being erected, covering the entrance to the kitchen. Arches are cut through the wall connecting the kitchen with another room in order to simultaneously connect and separate these zones, niches are made in the walls and a unique design is given to the windows.

The task of the arch is not to isolate one zone from another, but to create the visual integrity of the space, its enlargement and transition from one zone of the room to another without obstacles.
So:

Passive arches made by neighbors or in their apartment and have a simple configuration.
Active arches refer to complex forms of structures and can open a view of several rooms at once.
Classic look, where the arch of the arch is made in the form of a regular circle with a radius of curvature equal to half the width of the opening. The disadvantage is the “eating” of space in the place of the rounding, due to the large radius.
"Romance" has a straight central part and rounded corners and is placed in a small opening.
"Modern" is built with a vault in the form of an ellipse, regular shape. Looks good in wide spaces and small openings.
Rocker arch goes well with the panel of the door leaf, gives individuality to the room and is applicable to any size of the doorway.
"Portal" refers to the simplest rectangular design and refers to standard doorways.
"Transom" installed as a continuation of the doorway. It was practiced in old houses with high ceilings, now it is used in buildings where a large space allows.
The arch is performed in the form of a trapezoid with decorative sewing on the corners. It is used as an element of decoration for a rectangular opening, which does not require radical reconstructions.

Attention: Arches made of plaster and plastic are recommended for indoor use only.

What are interior arches made of?

The doorway is ready and looks like an arch or, as in the photo above, the wall element is made in a classic form and decorative finishing is required for the arch to really become a decoration of the room. The choice of materials for decorating arches is not big to say, it is huge and it is necessary to decide what to choose and who will do it.

Is it possible to do this work with your own hands or to listen to the saying that “the greedy pays twice” and trust the specialists right away? How to decorate the ends of arches and corners, is it possible to combine different materials in a small space?
What can you make an interior arch from:

Brick arch, when a wall with an arch-shaped opening is used as a lintel between rooms, and a brick arch is made with template formwork. The template consists of two posts and the arch itself from the boards.
The racks perform the function of support and are sharpened along the plane so that it is convenient to remove it from the finished structure without destroying the masonry. The masonry of the first row is made with wedge bricks, it is performed without gaps, exactly according to the template for reliability.
The thickness of the joints when laying with trapezoidal (wedge) bricks should not exceed 1 cm. It is recommended to remove the template not earlier than two weeks, after the solution has completely dried.
Arches made of solid wood, combined with modernity and classics, and adding luxury and respectability to the interior, are made of valuable tree species. How to decorate an arch in an apartment when it declares the stylistic accessories of the surrounding interior?
Patterns, details of the corresponding style that affect the final cost of the product, if the price of such luxury does not suit the customer, another material is chosen for finishing the arch.
Glued wooden arch made of solid blocks, firmly connected to each other. Existing technologies make it possible to obtain an arched structure of a given shape and length. Pine and spruce are used for production, and the physical, mechanical, aesthetic qualities are not inferior or superior to arches made of valuable tree species.
The joints of the glued arches are reinforced with metal inserts connected with screws.
MDF or literal translation from English is a medium-density fiberboard that does not change its geometry when the temperature changes and under the influence of moisture. The cost of an MDF arch is much less than that of wood.
How can you decorate an arch in an apartment made of sawdust, if at the same time it has an irregular geometric shape? It turns out that lamination and veneer are used to decorate the MDF arch.
During lamination, a special wear-resistant film with a wood texture is applied. It is available to many consumers because it does not belong to expensive materials.
MDF board, finished with veneer, practically does not differ from the material made from a whole piece of wood. The performance characteristics of an arch with veneer are higher than wooden ones, it is not afraid of moisture, is resistant to odors and does not absorb them, it does not jar and it does not crack.
The only drawback is that only smooth surfaces can be covered with veneer, and curved parts remain without top trim. When sanding and varnishing is done by specialists, the transition from veneer to MDF becomes invisible.
Fantasy on the theme of a futuristic style is not complete without drywall arches. The material from which any shape is created in style and size.
Plasterboard structures are used as decorative elements due to the inability to hold loads. How to decorate a drywall arch so that it becomes a real decoration and is associated with frozen music.

Choice of finishing materials

There are a variety of finishing materials on sale, manufacturers have tried and responded to the increased demand. The easiest and fastest way is to level the surface, then painted or wallpaper.
Modern varied compositions and wallpapers can withstand cleaning, washing and have any texture you want.
If the classic look of the finish does not suit you, other materials can be used:

Tiled, ceramic or mosaic tiles.
Decorative stone or artificial brick.
Mirror system.
Diverse textile material.
Flexible cork material.
Decorative plaster.

The design of doorways in the form of an arch is a popular architectural technique that has its own characteristics. Its shape and size play a big role in creating a well-planned interior space. The choice of material for manufacturing and decoration - arches are one of the important design elements of a house or apartment.

Views

Arches are a way to model the architectural space of a room. Structurally, it is an arc or a straight beam, lying on two supports, designed to distribute the load from overlapping doorways of a special shape.

For the first time, arched structures appear in ancient places of worship. Stonehenge is one example of this design. The third one rests horizontally on top of two granite blocks. This method was used at a later time for the construction of vaults in the temples of Egypt and Greece. Later, architects discovered the property of a curved arch to withstand a greater load than a rectilinear one, and began to use pointed arches in the construction of majestic palazzo in Italy, religious objects in Byzantium. Medieval European architecture creates a Gothic system of arches for the construction of colossal palaces and Catholic churches. In Russia, arches are also widely used in the construction of dome vaults in towers and churches, only their shape is slightly smoother.

Having a centuries-old history of use, arches also occupy one of the central places in modern architecture, their form is constantly being modified and changes depending on the required functionality.

The tradidionic arch is installed in the doorway.

In cottages of a large area, the entrances of several successive ceremonial rooms are trimmed with the same type of arched openings with the same decoration, which creates a suite of rooms, creating an infinity perspective.

The arched structure is especially relevant if the apartment is small. Several small separate rooms in terms of area are combined with the help of arched openings, abandoning interior doors between the hallway, room and kitchen. The square turns into one large one, and the vaults of the openings separate the entrance area from the recreation area and from the food intake area.

In large living rooms, such techniques are used for zoning the interior space. You can separate the dining area from the place for communication between households.

In the bedroom you can separate a bed and a small work space, in the nursery - a bed and a corner for games.

If it is not possible to abandon the doors and the room must be isolated, then an arched doorway is mounted. In this case, a special vault is built, arched doors of the same shape or rectangular are inserted into it, the upper part is made of the same material in the form of an insert above the top of the door frame.

This insert is often decorated with stained glass, made in the style of the interior, which gives sophistication and uniqueness to the house.

Decorative types of arc-shaped window openings are often used. It looks especially impressive if the same vault shape is present in the doorways. To emphasize the style of the interior, they build lancet or semicircular wall niches, repeating the shape of the entrance groups. Backlighting in such a niche creates an atmosphere of depth and mystery. An arched decorative vault over a fireplace or kitchen set highlights the place of the "hearth" in the house.

Location options

Let's take a closer look at how best to position the arch in the interior of an apartment or house. In serial residential multi-apartment construction, replacing part of the doors with this architectural element makes the premises unique.

Design solutions are very diverse, any form of the entrance opening is allowed, corresponding to the style concept. However, the dimensions of the room must be taken into account. So, if the ceilings are low, then it is better to replace the lancet forms of the ceiling with semicircular ones. The width of the room also determines the size of the arched opening - it can be supported by small consoles adjacent to the walls. Then zoning can be fixed with various types of finishes in the floor and walls, or vice versa, the wide arched structure can be replaced by a series of narrow vaults resting on columns located across the room.

It is worth noting that the arched colonnade is not suitable for all rooms. Only owners of large halls can afford it.

In an ordinary one-room apartment, it is better to focus on choosing a modern style solution, while the classic requires a larger area. Modern will be good here. The exotic form of the vault, behind which the intimate sleeping area will be located, looks very romantic. In studio rooms, you can create several entrances and conditionally separate the kitchen, living room, bedroom.

If several arched structures are used in the same room, then they must necessarily duplicate each other in design. Often, in the finishing of the floor along the lines of the entrance groups, various finishing materials are combined.

Refusal from traditional doors in favor of arched openings in small apartments saves space, increases the usable area, has an aesthetic component, and helps to correct layout flaws.

For example, a long corridor decorated with arches makes the space wider and clearer in function. They resort to the allocation of the entrance zone by the first vault, the second - to the groups of public premises - the hall, the living room, the dining room. The third arch will separate the exits to the corridor of bedrooms, nursery, office. If necessary, designate utility and utility rooms.

The best option is the location of the arches in the hallway, between the dining room and the kitchen, the living room and the dining room. But not only vaulted structures are erected between the rooms, such elements look spectacular in front of a warm balcony or terrace, especially if the unusual shape of the opening contour is used.

Sizes and shapes

There is a huge variety of sizes and shapes of arched structures, which are determined by the layout and architectural features of the house. When installing this element in panel or monolithic houses, the size will be limited by the width and height of the existing doorway. Changing these dimensions will require the architect to calculate the load-bearing capacity of the new structure in order to comply with the safety requirements for the operation of the building. You will also have to carry out construction work on dismantling with the involvement of special equipment, which will entail additional costs.

Reliability of performance is the main condition for the design of openings. The bearing load from the overlap is redistributed to the side parts of the space: consoles, columns, piers.

To ensure the reliability of wide openings in the entire width of the room, a frame made of a metal profile or solid wood, subjected to special processing in order to bend in the necessary places, is used.

Such openings look good for functional zoning of one room. For example, in the living room combined with the kitchen, on one side of the arch, a kitchen set with the necessary equipment is installed, a dining group is placed, and on the other side of the arch are sofas, a coffee table, possibly a fireplace with armchairs.

When decorating interior transitions, sizes close to standard doorways are used - for single-leaf or double-leaf doors.

Modern technologies make it possible to equip almost any opening structure with sliding or swing doors, therefore, if necessary, any room or part of it can be isolated. For example, separate a temporary sleeping space for guests in the hall with a convertible or folding door installed in an arched vault.

The height of the vaulted opening also varies depending on the style of the interior and functionality.

Classic forms are good in spacious rooms with high ceilings, but for standard apartments it is better to choose modified types of openings.

The general design of the room will tell you which shape of the arch to give preference to. For classic interiors or in Provence and Mediterranean styles, semicircular structures are suitable - the so-called Florentine arches. The semicircular element visually increases the height of the room, adds "air". Modern minimalist trends in decoration bring a sense of lightness and fit well into any interior.

If the height of the opening is insufficient, the segmental shape of the structure is used, when the radius of the arch is more than half the width of the doorway. Sometimes the arc can only be slightly rounded, but in this form the space will be visually higher and lighter.

In the dividing zone for the kitchen and dining room or similar premises, wide three-center or pseudo-three-center structures are often used. This is a strongly elongated and slightly rounded (in the second case, only in the corners) vault. This shape is close to the square or rectangular shape of the portal, the rigid lines of which correspond to the ultra-modern energetic and fast-paced design trends.

The parabolic type of construction corresponds to the Moroccan and Arabic styles - it is a semicircle stretching closer to the ceiling.

In interiors made in art deco design, art nouveau, an ellipse structure is a good solution.

In non-standard cases, when it is necessary to maintain the stability of the structure, using a window sill or balustrade zone, arches are installed in the form of an incomplete circle with a rounded not only upper, but also a lower part or in the form of a keyhole.

The Art Nouveau style introduced into the architecture of apartments the smooth lines of arched openings of a floristic orientation in the form of a flower petal or a curved stem, where there are no corners at all.

Decor and decoration

For each shape and purpose of the arched opening, you can choose the appropriate finishing material. The basic structure of the vaulted floor in large-scale construction projects is the construction reinforcement, made to the shape of the span. For apartments and private houses, lightweight structures made of metal profiles or wood are provided.

The traditional material for making arches is drywall on a metal profile frame. Any shape of arch bending can be cut from the sheet according to the design project.

It is a material resistant to temperature and humidity.

It does not change its characteristics when exposed to ultraviolet rays, it is strong enough to be used as a basis for decoration with stone, tiles, wood. Minimalism in decoration allows simply plastering the structure from drywall and wallpapering, as in the rest of the room. In the span of the arch itself, decoration with stucco decorations is used.

A win-win option is painting in the color of the ceiling, which will visually expand the space.

Arch openings can be trimmed with wood and decorated with carvings. But it must be remembered that wood edging makes the interior heavy. Several types of wood are poorly combined in one room. Framing with wood requires the installation of interior doors and an entrance door with interior decoration of the same wood or veneer, and furniture in rooms adjacent to the arch is made of the same types of wood.

A budgetary replacement for arches made of natural wood or veneer steel structures made of polymer materials with various surface textures, for different types of wood, stone, brick. A pleasant addition to the affordable price is the ease of maintenance and practicality of such a finish.

Vaults made of chipboard and fiberboard can be decorated with many decorative coatings, they are inexpensive and have good performance.

Arch finishing is the final stage that will emphasize all the beauty of the structure. It should be noted that this particular work is the most important when it comes to the decorative component. Don't worry - you can do everything completely yourself. The main thing is to show the necessary perseverance and desire. Of course, you cannot do without some experience and the availability of the necessary tools, which are selected depending on the chosen finishing option.

Making an arch in an apartment is a process that is carried out after the main work has been completed. The fact is that such structures are made from various materials, using various technologies. The resulting architectural element serves to decorate the entire interior, giving it some individuality. We must not forget that the cladding can play not only a decorative role, but also a protective function.

Here are some tips to help you achieve the desired effect:

The easiest way to decorate an arch in an apartment with your own hands is to highlight the arched opening with the desired color. Often, shades are selected that will contrast with the walls. Thus, it is possible to obtain a complete structure with a minimum of effort. This method can be used for other materials as well.
Decorating material can be matched to existing colors. For example, if interior arches are lined with MDF panels, then it is desirable to combine them with closely spaced door leaves.
You can decorate the structure using various embossing, patterned ribbons that correspond to the general direction of the design.
Nowadays, stucco molding is becoming more and more popular. Indeed, this is a great option that allows you to emphasize the interior, decorated in a classic style.
The mosaic looks quite peculiar. Its use requires experience in installation. But if everything is done flawlessly, then the effect will be amazing.

Decorating the arch with mosaics is an unusual solution that deserves attention

Selection and use of materials

How can you decorate an arch? Currently, there are many materials that do an excellent job with this task. We can highlight the most popular ones that deserve special attention:

Natural and artificial stone. It should be borne in mind that the first type requires more professionalism.
Cork. Completely natural and environmentally friendly product. Price can be a significant disadvantage.
Decorative plaster. This option allows you to finish surfaces in such a way that the impression of a natural stone will be added.
Various types of tiles. They are similar in technology to stone, but give the interior a completely different look.
Textile. This material requires a special approach to exclude banality and simplicity.

Of course, there are much more products for decorating arches. With a certain desire, completely unusual options can be used. So, for example, the structure looks quite original, which is lined with fitted saw cuts of logs. Technologically, this solution is very simple. The workpieces are cut to the desired size. On the one hand, a cut is made, which will serve as a groove for the edge of the opening. Such blocks are inserted into place, fixing on self-tapping screws.

Wallpaper - simple and affordable

Indeed, this is one of the easiest ways to complete the entire process in a short time. The main thing is that the costs will be minimal.

Wallpapering is the easiest and most inexpensive way to decorate an arched opening

The whole process is very simple:

If required, the surface is leveled before the wallpaper is pasted over the arch.
On a note! Before finishing the drywall arch, a layer of putty is applied to its surface. This is necessary so that in case of a desire to update the finish, the wallpaper does not have to be removed along with the cardboard.
After waiting for the applied composition to dry, the glue is prepared. It is kneaded according to the manufacturer's instructions.
The wallpaper is cut into strips of the desired length. The sticker carries out strictly vertically, capturing part of the opening. You should get a bend equal to 3-4 cm.
To bend the allowance, but avoid creases, cut the edge into corners.
Now the most painstaking part of the work - you need to cut a strip that will be glued to the arcuate surface. This must be done so that the existing drawing matches. This area is smoothed from top to bottom. That is, gluing is performed at the highest point, after which the fragment goes down to the bottom.

Although there are some negative factors to consider:

It is necessary to decorate, taking into account the fact that such material is very short-lived. After some time, the surface may acquire a yellowish tint. The feeling of novelty will disappear.
The use of wallpaper is limited by the location of the opening. They are not recommended for use on structures located in the kitchen area. Even washable types won't save the day.
Lack of protective functions. Such a coating is very easy to damage, moreover, from minimal mechanical stress.

Of course, this cannot be said that this method allows you to decorate the arch. But, undoubtedly, it is suitable for many situations that require the work to be done most simply and inexpensively.

Stucco molding - effective and graceful

To get a spectacular arch that attracts the eye, use polyurethane stucco molding. This is a modern version of the product, which was previously made exclusively from plaster. It is actively used to frame various designs.

Decorating the arch with polyurethane stucco molding - an affordable solution with a stunning effect

This option has its own characteristics. The fact is that the finishing material is more suitable for classic interiors. If you use a polyurethane arch in a modern style, then such details may seem completely inappropriate.

Installation is carried out using the following technology:

The surfaces are leveled. All areas are well cleaned.
All dust is erased. If you leave such flaws, then the gluing will be unreliable.
The treated surface should dry well. This period is used to carry out the pegging. You may need to trim parts.
On a note! For trimming at an angle of 45 degrees, a miter box is used. It is important to correctly position the elements to avoid the appearance of docking gaps.
Now you can start gluing. For this, a special composition is used, which is marked: "suitable for gluing polyurethane products." This substance is applied to the wrong side of the part, which is pressed against the surface and held. If joining is performed, then the glue is spread on one side. It is important to remove the excess immediately. Seams are treated with putty and sanded.

When finishing the arch with polyurethane, it must be borne in mind that all work must be done with special care. Any defects will be very difficult to fix.

Decorative plaster - time-tested

Arched openings can also be decorated with decorative plaster. This method has its positive aspects. This is one of the few options that allows you to get an extremely personalized surface that will be distinguished by its durability.

Some disadvantages cannot be ruled out. Thus, the coating is very difficult to restore if damaged. If the result of the work is a relief surface, then it must be constantly looked after.

On a note! It is very easy to arrange an arch in an apartment with your own hands if you use special decorative mixtures. They have a long setting time, which allows you to form the necessary texture so as to achieve the desired result.

The order of work is as follows:

Decorating arches begins with preparing the right amount of mixture. Further, it is transferred to a prepared, well-primed surface. It is important to consider that each layer must have a certain thickness. Their number depends on the chosen decorative type.
To form the relief much faster, special rollers are used.
The resulting relief is left to dry. Then they are covered with a primer.

The finished area can now be painted. To obtain an interesting effect, two shades of paint are applied to the surface. One is filling in the depressions, the other - the ledges.

Stone - reliable and distinctive

A stone is a great solution that will help you create your own flavor in the interior. It is important to consider that it is better to give preference to artificial options. They are much easier to process and do not require professional knowledge. A material that follows the curves of the structure looks best. In this case, an arc.

Decorating an arched opening with decorative stone is a stylish solution for modern interiors

Actions are performed in the following order:

Decorating the arch with your own hands begins with the preparation of the coating. It is important to exclude any drops and defects.
A laying diagram is drawn up. Marking is performed on the surface. Nearby, on the floor, material is laid out. This technology will allow you to immediately adjust some elements, distribute them more correctly, and avoid mistakes.
The stone is laid on glue or a special mixture. The technology allows you to create wide joints or do everything without seams.
If trimming is performed, the trimmed edges must be processed.

The same technology is used when the question arises of how to decorate an arch in an apartment with tiles. But it should be borne in mind that this material requires adherence to a certain sequence. If the stone can be laid "randomly", then the tile is distinct.

Plastic - modern and affordable

Plastic is pretty easy to work with. It is important to understand that not all panels can be bent to the desired angle. Many, especially cheap ones, break down quickly. It is much easier to revet an arched opening with plastic panels when it has an angular vault.

The following manipulations are performed:

Careful surface preparation can be excluded. It is important to understand that often, panels are used to form an entire opening. That is, they act as the main and decorative structural elements.
A wooden crate is created. It will act as the foundation around which everything else is built. The slats are laid perpendicular to the panels.
An arched dome is formed by dividing it into sectors. Often, the division occurs into three parts: top, two extreme fragments.
The panels are fixed on staples, which are hammered with a stapler along the edges. All joints and transitions hide decorative corners.

Self-plating of the arch with plastic will not cause any particular difficulties

How to decorate such a surface additionally? To do this, you can use various decorative elements that will be in harmony with the plastic.

On a note! It is not difficult to revet the arch with your own hands with plastic. The main thing is to choose not the cheapest materials.

Cork - sustainable and stylish

This is a fairly popular destination, which is limited only by the fact that this option can be very expensive. This state of affairs is explained by the fact that cork is a completely natural material.

Cork finishing will create warmth and comfort and will not harm your health

For work, it is advisable to use roll options. They are great for doing all the work yourself. It is important to bear in mind that before you decorate the arch, located next to the kitchen, with cork material, it must be waxed. This will prevent damage to the coating.

Of course, finishing the arches in an apartment with a cork is an excellent solution, but you need to remember that the overall interior design must be adhered to.

It must be borne in mind that all finishing work must be carried out in strict observance of the existing rules. Then such an architectural element will become a real decoration.

Finishing options for arched openings (20 photos)

Arched openings are both constructive and decorative elements of the interior. They make the space warmer, more living and more soulful. Often it is the arch that creates the character of the room, but only where it is assembled correctly and tastefully. And even in this case, a competent question arises: how to decorate the arch? The decoration of arches can be extremely varied:

Arches with wood trim

Wooden arches make the space more significant. They are ideal for classic-style rooms. Wooden elements perfectly emphasize the shape of trapezoidal, vaulted arches and interior structures in the form of an ellipse. However, designers do not recommend resorting to wood trim where there are arches of non-standard shapes, as well as in laconic interiors and in wet rooms. Natural wood is an expensive material and the feasibility of its use should be weighed very well.

Arches finished with MDF and chipboard

Such arches are significantly cheaper than their wood-faced counterparts. However, from such slabs, with the right approach, even corners and arches of beautiful geometric shapes are obtained. If we additionally apply the technologies of lamination and veneering, the material cannot be distinguished from solid wood, but only experienced professionals can carry out such a task.

Arches finished with facing bricks

This option is also not suitable for every interior. This is a rather laborious process that includes 2 stages:

First of all, vertical pillars are placed;
In the second, the arch is being erected.

The arch is made using a template, which must not be removed before the solution completely solidifies. The corners and joints can be finished with plastic.

Polyurethane finish

Thinking about how to decorate the arch stylishly and inexpensively, it is worth remembering polyurethane. The polyurethane finish looks expensive, although it is quite affordable. This durable, but flexible and lightweight material has impressive performance characteristics, therefore it is widely used for making stucco moldings, for finishing ceilings, corners, cornices and, of course, interior arches. The undoubted advantage of polyurethane is the ease of its installation - a completely unprepared person can do it with his own hands, with a little effort. In terms of execution, such arched structures are not inferior, and perhaps even surpass arches made of many other materials.

Decorating the arch with decorative stone

Such a finish looks organic only when part of the wall is involved in the stone composition. Moreover, if natural stone is a very difficult material to process, then finishing the arch with decorative stone does not imply great difficulties - it is very easy to attach it to special glue or ordinary liquid nails.

Plasterboard partitions, and walls made of lightweight blocks, are not designed for a heavy load, so finishing the arch in an apartment will be more successful if you use an artificial stone wisely. This material is based on a binder such as gypsum or cement. In addition, the composition contains expanded clay or perlite, and modern dyeing technologies make artificial analogs almost indistinguishable from natural stone. A big plus is the infinity of its shades and textures.

Decorative plaster

How to finish an arch without a lot of labor? Decorating arches with your own hands is easiest done by plastering them with decorative plaster. First, the irregularities and visible parts of the fasteners should be putty, a primer is applied on top. After 4 to 24 hours have passed (the exact time is indicated in the manufacturer's instructions), you can start applying decorative plaster. The range of such a mixture allows you to choose any surface texture. If relief is expected, it should be applied to a wet composition. In the case of using this method of finishing arches, it will be appropriate to use an arched corner, which will save the plaster from chipping off.

Pasting the arch with wallpaper

As an option for finishing the arch, wallpapering is suitable. It should be noted that the glue mixture should be slightly thicker than for ordinary wall pasting. The corners will help protect the wallpaper from abrasion. You need to take those wallpapers that are stronger and bend better, suitable options:

Mirror tiles

Mirror tiles are a specific facing material that can be used to decorate a wide variety of rooms. In the case of an arch, it will fit in the form of separate inserts from narrow stripes. Such tiles are perfectly combined with all other finishing materials (plastic, wood, etc.) and can serve for a stylish separation of different textures of finishes, corner decoration.

Mosaic

How to decorate the arch to give a unique look to the room? Decorating the arch with mosaics is ideal for a stylish interior with character. The mosaic can be:

From glass;
Ceramics;
Natural stone;
Self-adhesive panels, etc.

In any case, fixing it is a delicate and time-consuming process. Moreover, such a finish is performed quite often, as it looks original and unusual. First, an adhesive solution is applied to the wall, all corners are well oiled, and then a mosaic is applied using a level, beacons are inserted between the parts, then they are pulled out, and the seams are processed with decorative putty.

In addition to the above methods, the decoration of the arch in the apartment can be carried out with the help of a host of other materials that can make the arch unique. For example, it is convenient for finishing to use flexible acrylic tiles that repeat the appearance of natural stone, but can be of all kinds of sizes and colors. Stripes of decorative molding, fixed with "liquid nails", look very good. There are options with plastic - the use of plastic lining and panels can quickly and easily give the arch a neat and beautiful look. Plastic trim is very inexpensive and practical.

Wall decoration around the arch

The decorative arched corner serves to highlight the arches against the background of the rest of the interior. In addition to the design function, the corner allows you to hide irregularities in the arched doorway. This is especially true for those who make an arch with their own hands. But even an ideal doorway should match the style of the wall on which it is located. The main purpose of such a wall is to emphasize the beauty of the opening. This works well, for example, against the background of decorative embossed plaster. A wall lined with artificial stone looks no less harmonious. As elite finishing options - compositions of Venetian plaster on the wall. If the arch is finished with plastic, then a section of the wall can also be pasted over with plastic. You can also decorate the wall with wood - attach wood panels to a part of the wall. Even simple, tasteful wallpapers will accentuate the beauty of the arch on the wall.

Decorative finishing of arches in a house requires great delicacy, at this stage it is easy to make a mistake that will disfigure even the most durable and neat arched structure. And yet, it is quite possible to decorate the arch well without the help of specialists - with your own hands.

You can visually increase the space in the apartment using an arch. The absence of a door and the widening of the opening make the room larger and brighter. That is why in most modern apartments you can find a wide variety of arched openings.

Methods for finishing an arched opening

The arch is comfortable and very beautiful. In addition, it can be finished with a wide variety of materials, which allows the landlord to use all his imagination for the best result.

Tips on how to make a drywall arch in the video:

Among the most common design options for arched openings are the following:

Wallpaper gluing. This is the most economical and easiest way to finish. Moreover, a wide assortment of patterns and patterns, as well as the presence of interesting textured wallpaper, allows you to create a unique framing of the arched opening, corresponding to the style of the main room.

If the arch is finished directly by the owner of the apartment, without the help of specialists, then for this he will need such tools: wallpaper and glue for them, a brush, scissors, a pencil and a ruler.

The process itself is within the power of even a person who is far from repair work. Wallpaper gluing is carried out in several stages:

First, the glue is mixed according to the instructions on the package.
Next, the first strip is glued on the wall near the arch.
The next part of the wallpaper is glued to the arched opening. Excess paper is cut off, leaving a 25 mm allowance.
Now the allowance is cut at intervals of 2-3 cm and folded to the slope. With the help of a brush, it must be firmly pressed against the surface to be pasted. We do the same on the other side of the arch.
Now the wallpaper is glued to the arched vault and side walls of the opening in the usual way.

The use of decorative stone. This option is truly magnificent, it will decorate any interior.

You can use both artificial material and natural stone. Outwardly, both of these finishing methods look almost the same - chic and expensive. The difference lies in the price and complexity of installation.

Wild stone has a higher cost and greater weight, which makes it somewhat difficult to install. Artificial material is quite affordable, and its installation will be quite simple.

You can correctly put a decorative stone on an arched opening in a few steps:

First you need to prepare the surface, make it somewhat uneven with notches, for example.
Next, an adhesive composition of cement, glue, sand and lime is mixed.
Laying the first row begins at the junction of the arch and the wall. The first stone in the second strip should protrude beyond the corner by the thickness of the tile.
The stone laid on the rounded part of the arch should be carefully trimmed with a sharp knife and pliers (a basting is made with a knife, and all excess is removed with pliers). Irregularities are smoothed out with sandpaper.
A day after pasting the entire surface with a stone, it is necessary to wipe the seams. This is done with a rubber spatula.

Not only the arch itself, but also a part of the adjacent wall is usually decorated with decorative stone. Such a technique will add exquisite chic and comfort to the room. More photos and information about this - in.

Plaster finishing. This is a simple and inexpensive way to make an arched opening interesting and original.

With the help of plaster on the surface, you can make a wide variety of relief patterns and apply any colors.

Finishing is carried out as follows:
First, the first layer of plaster is laid to level the surface of the arch.
Further, the surface is primed.
Now you can apply another layer of plaster and form a relief and the desired texture on it. Sometimes several layers of material are used.
After the surface has dried (after about a day), the arch can be painted and rubbed over.

Arch decoration - room for the designer's fantasies

Other ways: tiles or mosaics. Of course, they are not among the popular options, but they are still worth mentioning. Decorating an arch with mosaics or tiles is a rather laborious and expensive process, only a specialist can handle it. And the result doesn't look particularly impressive. Therefore, this design is rarely used.

The non-standard ideas of the landlord or designer will help to make the arch truly unique. Well, and inspiration, of course.

Arch and different interior styles

It is almost impossible to imagine an apartment or house made in a certain design without the use of drywall. And where there is drywall, there are arches.

There are some features of finishing arched openings for different interiors:

The classic design of the room assumes the presence of the same traditional semicircular arch. Its radius should be equal to half the width of the doorway. No unnecessary turns, bends, etc., just graceful smoothness of lines.

Decorating the arch in a classic style involves the use of natural wood. This method will make the room even more luxurious and attractive. It is also possible to use polyurethane moldings in a color that matches the overall range of the room.

By the way, glass transoms are often used in this style, which are made both from ordinary glass and from mosaics.

A modern high-tech room requires a minimum of decoration and imagination in the decoration of an arched opening. In such an interior, arches are rarely used at all, but with its correct implementation and design, it will become a faithful ally and emphasize the modern spirit of the room.

To decorate the arch in this case is very simple - you just need to paint it in the color of the walls and that's it.

Since the high-tech style involves the use of smooth metal objects and surfaces, glass and mirrors, the arch can be equipped with built-in lamps or decorated with modern stylish accessories. More about high-tech style - by.

But it is advisable to make the arch itself not just semicircular, but to give it an asymmetrical shape with strict outlines.

The room in the Art Nouveau style is perfectly combined with arched openings (on our website). However, the arch should have specific features - a fairly large width and a clear transition from a rounded part to a straight line. The opening is very similar to the classic one, but it is more strict and elegant.

You can decorate an arched opening in this style using wood or artificial materials similar to it. Finishing assumes both simple lines and the presence of non-standard shapes, bends, cutouts, etc.