Step-by-step instructions for performing bathroom renovations. How to make repairs in the bathroom: recommendations of the masters DIY bathroom remodeling

The bathroom is, first of all, the place where you can relax and pamper yourself with hygiene and beauty treatments. Therefore, its beautiful and comfortable arrangement is a matter of paramount importance! We have collected for you 31 bathroom ideas that will not cost you a pretty penny and will delight the eye for years to come!

1. DIY shower curtain

In order to create your dream curtain, which would perfectly match your bathroom interior, you only need a simple cotton fabric, acrylic paints and a little imagination!

2. Cold tiled floor is 110% cozier with pom-pom carpet

Make your morning trip to the sink a lot more enjoyable. All you need is yarn and a simple rug base.

3. Pour all your shampoos, balms and hair masks into the same bottle for complete harmony

Use small, cute containers. Not bulky plastic bottles!

4. Convenient organizer for storing small items

It will allow you to save space on the table, and it will be very easy for you to keep order there.

5. A mirror in this design will look impressive in any bathroom

6. Use a curved curtain rod

This bar will make your shower more comfortable than a straight bar.

7. Hang up two shower curtains for a special ambiance

The double-panel shower curtain will make your bathroom look more luxurious. If you have a small tub, you can simply cut the curtain in half and hem the edges. As easy as pie!

8. Hang towels on a rustic decorative staircase

Nice little thing: this piece of furniture is very mobile, and you will not need to drill holes in the walls.

9. You can make your life easier by adding a second cornice to your shower.

In addition to being very convenient, and hanging things dry much better.

10. Get a quirky spa experience with a pebble rug

All you need is a rubber mat (with drainage holes), waterproof sealant, and smooth stones.

11. Pour your mouthwash into a carved crystal decanter

12. Make this a cheap and easy-to-use tray for drinking wine or reading books in the bathroom.

13. Turn a cheap dresser into a dressing table

14. A brightly colored mirror frame will dramatically change the look of the mirror.

15. Coasters like these under the sink will actually destroy the clutter in your jars.

16. You can save space in a small bathroom by using hanging jars for storing makeup items.

It is not just a convenient storage solution, but also a beautiful wall decoration!

17. Reliable protection from prying eyes - light-sensitive paper for contact copying

Pros:

No clutter of curtains.
- Natural light enters the bathroom.
“You can find this kind of paper in any printing materials store.

18. Store your curling irons, irons and hair dryer in the PVC water pipe.

Cords are no longer tangled and everything is in place!

19.Add some rustic charm with a pallet shelf

20. Your regular sink table can be turned into granite thanks to the special paint!

21. Turn an old window into an original first aid kit

22. Now in the morning you will remember all your plans thanks to the chalkboard on the dressing table.

You will need a glass frame, white paper, and any stencil. All ingenious is simple!

23. Funny horns on the wall as a great alternative to a boring towel hook

24. Dressing table with glass top will let you see all your makeup supplies

An ingenious solution for an original bathroom!

25. Decorate your bathroom walls with geometric mirror accents

Mirrored decorations are ideal for making a small bathroom appear larger. For this amazing decoration, you only need cardboard figures for the base, made with your own hands, and pieces of a mirror.

26. Give new life to cheap glass bottles and vases

To do this, you need a spray bottle with milky paint.

27. Refresh the shelves and brighten them up with paint in your favorite color

Stick labels on shelves for top-level order and organization!

28. Add some vegetation to bring natural freshness to the bathroom

But choose plants that are suitable for the bathroom environment - preferably ones that don't need a lot of natural light and are suitable for a humid environment.

29. The flickering light of the garland will be a great decoration for your room in the evening and at night.

You can lay out any word or any shape you want.

30. Such extraordinary shelves can perfectly fit into any interior

31. Finally, make your bathroom experience so much more enjoyable with the fun Dino toilet paper holder

Get inspired and experiment with colors and shapes for more coziness, order and comfort in your home!

Let's take a look at how to make repairs in the bathroom yourself. What tools do we need for this. What difficulties lie in wait for us and how to overcome them. How not to miss important points when renovating your bathroom. Why do-it-yourself high-quality repairs will not always be cheaper than repair by hired workers.

Like any other construction and repair company, you should start with a project and an estimate. We have to figure out what exactly we want to see in the renovated bathroom. Make a detailed list of what you need:

• furniture
• plumbing
• Appliances

Then you should estimate the arrangement of all of the above, taking into account access to communications. For example, it is not always possible to lay the sewerage system in the place where you would like to install a washing machine or shower stall, observing the required slope of 2% (2 cm per 1 meter of length). Therefore, take into account such a moment in advance so as not to suffer in the future with constant blockages of the sewage system.

After you have "put" everything in its place, think over in detail the design that you would like. And proceed with the estimate.

If you're on a budget, you can start doing your DIY bathroom renovation. To do this, you need to understand what tool we need.

Essential tool for bathroom renovation

Usually, those who start repairs with their own hands already have some kind of tool in their arsenal. If you are going to purchase the necessary tool for repairing a bathroom from scratch, then we strongly recommend that you think about whether it would be cheaper to hire workers with your own tool? Because the cost of work is usually 50% of the cost of materials for finishing and communications, and the cost of the tool may even exceed this amount. Bathroom renovation tools aren't cheap. And if in the future you do not plan to engage in self-repairs, it will be a waste of money. Consider leasing or selling the instrument. So, what do we need:

• perforator with a wide chisel, drills, mixer attachment
• tool for strobe
• soldering iron for plastic pipes
• tile cutter (if you plan to finish with tiles)
• spatulas
• diamond core bits
• set for electrical work
• a regular set of plumbing tools

Work order

First, you need to turn off the power and water. Then remove all furniture and plumbing from the bathroom. But do not rush to throw it away. If you have a sturdy but old cast iron bathtub, consider this.

After cleaning the room, close the doors tightly with foil or cloth and start cleaning the ceiling, walls and floor. The old whitewash must be washed off, the paint must be removed with a drill with a nozzle or a construction hairdryer. The tile is beaten off with a wide chisel perforator. Don't forget construction goggles, a respirator, and gloves. Dust and small chips from the tiles are very dangerous.

Take a close look at the old plaster and floor screed. They must be strong, reasonably flat and free from cracks. Otherwise, they will have to be replaced. When replacing a floor screed, consider the installation option. Small irregularities and imperfections can be repaired by puttying with tile glue, having previously well primed the surfaces.

Sewerage

We are starting to replace communications. First, we deal with the sewerage system. An important point here is the insulation of the risers and the observance of the slope with horizontal pipe routing. Be sure to insulate the sewer riser with expanded polypropylene, because condensate can seriously spoil your repairs in the future. Do not forget, warm air flows through the sewer riser. And the riser is usually "sewn up" with various partitions, screens, etc. This significantly interferes with the external ventilation of the riser. Therefore, condensation forms on the outside of the pipe, from which then moisture, dirt, rot, and fungus come out. Another advantage of insulation will be an increase in sound insulation. Recall that the slope of the sewer pipe in the horizontal plane should be 2% (2 cm per 1 meter of length). This slope makes it possible to flush debris through a pipe in a stream of water. If the slope is higher, the water will drain faster than the debris, and if the slope is lower, the debris will stagnate.

Water pipes

Then we change the water pipes. Modern renovation involves hidden pipe routing. Therefore, you have to tinker with the gates for the pipes. Provide a cabinet or niche with a door near the water riser to be able to check the water meters and the location of the main stopcocks there. In this case, you can always easily turn off the water in the bathroom.

An important point: When you have laid the pipes under the faucet on the wall, connect any old faucet (or a carefully closed new one) to the outlet and plaster the groove with pipes. Alternatively, use a special fixing strip to secure the fittings. This will secure the endings in the required plane. So that it does not work out later, that they will "look" in different directions.

Electrician

The next step is to install the electrical wiring. Choose wires with good insulation, check this point with a consultant in the store. All sockets and fixtures must also be made specifically for rooms with high humidity. Never install "regular" sockets and switches. Fortunately, now the choice allows you to easily find a suitable option. Provide protection of new wiring from short circuits and the ability to disconnect the bathroom separately from the rest of the home.

Ceiling

Then we start to work on the ceiling. With modern renovations in old apartments of the "Khrushchev" type, it is not uncommon for the ceiling level to drop. They are made or suspended, spotlights are built into it, etc. The main thing here is not to forget that the ceiling cannot be made of ordinary drywall and that the ventilation hole cannot be closed. Ventilation is very important in the bathroom. We take into account that the air flow into the bathroom should be at the opposite end from the exhaust hole. Usually the holes at the bottom of the entrance door serve as "inflows". Consider removing humid air from the room on the opposite side. Do not forget that if you have a small bathroom, i.e. 3-6 sq. meters, then you will need forced ventilation. Buy and install an exhaust fan. With a larger room, forced ventilation is installed in case of insufficient draft in the duct.

Floor

After the ceiling, go to the floor. If you need a new screed, we do it. If possible, we insulate it. We put the floor covering. The most common coating is still ceramic tiles. When laying it, they are guided by the principle that it is necessary to start laying from the most noticeable place. This is usually the entrance. So that the tile trims go under the bath or furniture. But tiles aren't the only option for decorating a bathroom. Moisture-resistant wood varieties such as teak and larch are now popular. It is certainly expensive, but very beautiful.

Walls

Then we go to the walls. Before finishing the walls, be sure to prime them. If you are finishing the walls with tiles, then here, as in the case of the floor, the installation starts from the most noticeable place. If you decide to paint the walls, then choose a moisture-resistant paint that does not allow steam to pass through. Cover the wall with penetrating waterproofing before painting. If you have opted for plastic or other wall panels, then also take care of waterproofing. Keep in mind that the frame of the lathing under the panels cannot be made of wood. In a space enclosed by panels, the tree will rot very quickly. Plus, it will be a source of fungus and other contamination in your bathroom. Choose a galvanized metal profile. Or glue the panels on special sealants and adhesives, like "".

Furniture and plumbing installation

The next step is to install furniture and connect plumbing. Handle new equipment with care, remember to read the instructions before installing. After installation, we do a test run and check for leaks, correct operation of devices, etc.

If everything is ok, congratulations! You have successfully completed your DIY bathroom renovation. And this is not an ordinary event. We hope that our instructions helped you organize your thoughts, and perhaps taught you something. Please share your experience in the comments to the article. We are very interested in how you managed to make the bathroom renovation yourself and what came of it.

A bathroom can be refurbished in an exquisite way, even using the most basic building materials. It is not necessary to buy elite porcelain stoneware and lay out the walls to the ceiling, order stretch ceilings, spend money on the arrangement of warm floors with marble, it is enough to have the desire to do repairs, the ability to handle tools and a little bit of good taste.

Under the word "budget", the article will consider finishing options with the most affordable materials:

• paintwork;
• PVC panels;
• wallpaper.

In addition, the secret of creating an interior in style will be revealed and it will be proved that brick as a finishing material in a bathroom is not inferior to other materials. After all, "budget repair" can also be stylish.

DIY wall painting

Painting walls is considered one of the easiest and least expensive finishing methods. It is important to choose the right paint and prepare the surface of the walls.

Advice! Create a design project for your bathroom. It is not recommended to paint absolutely all surfaces; it is advisable to cover the areas near the bathtub and sink with moisture-resistant panels or trim with an apron made of inexpensive ceramic tiles.

Step 1. Choosing paint for the bathroom

Bathroom paint must be antibacterial and moisture resistant. Otherwise, the appearance of fungus and flaking of the coating cannot be avoided.

Traditional oil paints are deprived of such dignity, and also quickly become cracked, so it is better to refuse such an option right away.

When choosing shades, remember that it is inappropriate to paint small bathrooms in dark colors, as visually this will further reduce the space. Do not overdo it with the number of bright spots or complex patterns and their number, so that the interior does not look vulgar. Soft pastel colors will visually expand the room and fill it with light.

Please note that paints can be matte, glossy and semi-glossy. Of this variety, it is matte enamels that hide small defects on the walls best of all, while drops and streaks are clearly visible on glossy surfaces. However, if you can't make a choice, consider combining glossy and matte surfaces. This technique will allow you to make the bathroom modern and stylish without significant costs.

bathroom paint

Step 2. Preparing the walls for painting

Do not forget to take out all the furniture from the bathroom, remove the mirrors, cover the faucets with masking tape, and cover the plumbing with foil or newspapers, because preparing the walls for painting is the dirtiest and most time-consuming stage.

You should not apply new layers of paint over the old peeling paint, nothing good will come of it. If you have a drill in your arsenal, get a pair of sanding attachments for it and scrub the old paint off the walls. Remember safety precautions.

The paint can be removed using thermal methods, for example, using a burner or a hairdryer. Heat the wall section and scrape off any loose coating with a narrow trowel.

When all the old paint has been removed from the walls, it is necessary to repair cracks and potholes, knock down the protrusions.

Step 3. Preparation of materials and tools

Prepare paint and tools, follow manufacturer's instructions. To apply paint, you need a roller, brushes, if you have a spray gun - great. Before purchasing, measure the area of ​​\ u200b \ u200bthe surfaces to be coated, taking into account the volume, adjust the amount of material. For high quality painting it is better to apply two coats, keep this in mind at the time of purchase.

Step 4. Preparing the workplace

Free the workplace near the walls from unnecessary items, if you are not going to remodel the flooring, then cover them with foil or paper. Carefully protect the bathtub and sink from contamination.

Start work from the most inconspicuous corner, in this place you can practically learn the properties of the paint and, if necessary, dilute it to the optimal consistency. We recommend painting the walls with a roller, and brushing only hard-to-reach areas, corners and edges of joints of different colors with a brush. Panels in the bathroom are still in fashion, if you plan to make them, then mark the height on the wall, draw a horizontal line.

Step 5. Start of staining

Apply a deep penetration primer to the wall. It will not only improve the appearance, but also increase the strength of the coating, reduce the likelihood of paint peeling.

Apply a second coat of primer on top of the first and wait 24 hours

Pour a batch of paint into the special plastic roller tray. Dip a roller into it, turn it several times, remove excess paint on a horizontal platform.

Practical advice. To minimize the chance of paint spilling onto the floor, rotate the roller before blowing it out of the tray.

Step 6. Painting technology

Read the painting from top to bottom, this method reduces the likelihood of dripping, they are immediately smeared, the roller "rolls on" them. Paint carefully, do not allow gaps. Do not be upset if the first layer looks ugly, this is an expected phenomenon. The fact is that on the wall there are areas with old and new plaster, remnants of unremoved coating, etc. They all absorb paint in different ways, which is reflected in the appearance. The second layer will fix all the problems, the topcoat will be monochromatic.

Paint in small areas, touch up difficult areas immediately with a brush. The paint should smooth out the pile marks on its own. If this does not happen, add a solvent to it. Pay attention to be conscientious, read the instructions for use. If in doubt, test the solvent for compatibility with a small volume of material; if the paint curdles, change the solvent.

It is advisable to apply the second layer when the first one is not completely dry, so the coefficient of adhesion between them increases. It is easy to check the readiness of the surface - slide your fingertips over it, they should not get dirty, but only "creak" a little.

If you are making a multi-colored panel, then you need to paint the surface in the second color only after applying two layers of the first. In this case, start working from the top of the wall; the panel is finished last. So you will be insured against paint getting on the already finished areas. Glue masking tape along the border line. Make sure that the paint does not flow under it, paint only with a brush, the direction of movement is in the direction opposite to the tape. Never stick tape on paint that is not completely dry, this is very important. If you stick it on a freshly painted surface, then during removal, with a high probability, part of the paint will be removed along with it, you will have to redo everything.

Wall decoration with PVC panels

The cost is somewhat more expensive than the first method, but in terms of design indicators it is much better. And the preparatory work is greatly facilitated, there is no need to remove old coatings, level the walls and fill up the cracks on them. The lathing for the panels can be made of wooden battens or special plastic profiles with clips. We recommend using the second option. The cost of plastic additional elements has almost no effect on the price of repairs, and the work is greatly simplified. In addition, the plastic profile is not afraid of moisture, which is very important for bathrooms. Wooden slats need to be impregnated with antiseptics - an additional waste of time.

Calculate the number of panels required, make a margin of 5-10%. If you have little experience, and the bathroom has a lot of utilities, for the closure of which you will need to trim panels, then take a margin of 10%. Simultaneously estimate the number of starting profiles, outer and inner corners. They are sold in standard dynes, cost a penny, there is no need to save.

Step 1. Installation of the battens

The panels are arranged vertically, the crate must be horizontal. The distance between the planks is 50-60 cm. Make markings on the wall, make sure that the lines are parallel. The lathing is fixed with dowels, drill holes with a drill with a perforator, use drills with victorious solders. To prevent the floor from getting dirty with construction dust, cover the place against the wall with foil or paper. Once all the holes are made, immediately remove it. Do not leave cleaning for later, practice shows that no matter how carefully you work, garbage will certainly spread throughout the bathroom.

Make the holes a few centimeters deeper than the length of the plastic part of the dowels, otherwise you will not be able to insert them all the way, dust will interfere. First, drill the two outer holes, attach the profile, then fix it in several more places. The horizontal distance between the dowels is 60–70 cm.

How to fix elements in one plane?

1. Check the condition of the wall with a plumb line, pay special attention to the attachment points of plastic profiles or rails.
2. Fix the two end elements under the level, re-check their position. If there are large recesses in the place where the profiles are attached, then use pads made of various materials. The dowels should attract the profile over the entire plane, there can be no gap between it and the wall at the attachment point.
3. Pull the ropes between them, two at the ends of the profiles or rails are enough.
4. Install all other profiles under the rope, with its help control the position of the rails.

Step 2. Installation of plastic panels

Measure the wall in at least three locations. If they have a spread of no more than a centimeter, then the work is noticeably simplified - all panels can be cut to size at the same time. To do this, you need to find out the shortest one, cut all the rest along it. Fold the panels in a stack of 5-10 pieces. on a flat surface and cut off with a grinder with a disc for metal. A discrepancy of up to one centimeter will be hidden by the ceiling and floor profile. It is installed at the top between the wall and the stream and at the bottom at the junction of the wall and floor. Place plastic corners on the sides.

Take off the exact dimensions of the last panel, cut it lengthwise. You can cut with a mounting knife or grinder. If you use a knife, then the operation must be done in two stages. First, cut the top and transverse stiffeners. Second - bend the panel, at the bend on the second side with a mounting knife, completely cut off the desired part.

Finish the rest of the walls in the same way. Practice shows that it is better to make the place near the bathtub from ceramic tiles. You can not cover the entire wall, but only an apron. The main thing is to close the area, which constantly gets water during the adoption of water procedures.

Video - Installation of PVC plastic panels in the bathroom

Video - Decorating the walls in the bathroom in 1 day with plastic panels. Do-it-yourself inexpensive bathroom repair

Pasting walls with wallpaper

Only waterproof types can be used for wallpapering. This finishing method has a number of undeniable advantages.

1. Low cost allows you to have an exclusive and reliable coverage with small material losses.
2. High manufacturability. Of all the possible ways to decorate the walls in the bathroom, wallpapering is the simplest. The work is completed within a few hours, the premises can be used as intended the very next day.
3. It is possible to frequently change the design of the premises. In some cases, re-pasting can be performed without removing the old one - the repair time is significantly reduced, the amount of construction waste is minimized.

Disadvantage - in terms of physical strength, wallpaper is inferior to traditional materials. But, if you behave carefully and avoid mechanical damage, then the period is calculated in many years. In addition, defects on the wallpaper are easily eliminated; after pasting, a small amount of materials will always remain. Do not throw it away, keep it just in case for repair.

How to choose wallpaper for pasting a bathroom

It goes without saying that only water resistant. When buying, pay attention to physical strength, and it depends on the material of manufacture.

Wallpaper type	Brief performance indicators
	The most modern, are distinguished by high rates of mechanical strength, can have long-term direct contact with water. They are produced in a wide range of colors, can be monochromatic or with various patterns and ornaments, with a structured or smooth front surface. Disadvantages - relatively high price, the need to use a special glue.
	The cheaper segment, in terms of performance, is inferior to vinyl. Recommended for use on wall sections that are not exposed to splashing water.
	They are made from a special polymer film and have a huge number of design solutions. Disadvantages - relatively high price and complexity of finishing. In addition, they can only be used on perfectly level surfaces.

How to properly glue the wallpaper so that later you do not have to constantly re-glue the exfoliated areas?

Step 1. Surface preparation

The most important moment in the production of works, of course, apart from the correct choice of wallpaper. Wall linearity parameters affect not only the appearance of the wall, which is very important, of course. Even theoretically, it is impossible to glue waterproof wallpaper on an uneven wall. And this means that there will definitely be air pockets and other places in which the wallpaper is not glued. During the use of the bathroom, these areas constantly increase in size, this continues until the peeling becomes noticeable. Repair will be required, it is quite difficult to perfectly align the wallpaper after repair, and in some cases it is impossible. What are the requirements for the wall surface?

The surfaces must be primed in two layers, this increases the reliability of adhesion and serves as additional protection against moisture penetration.

Calculate the surface area, make a small margin. Each roll of wallpaper is marked with length, width and total area. Use this information when purchasing materials. Do the same when choosing an adhesive.

Step 2. Algorithm for pasting vinyl wallpaper

Measure the height and width of the wall, cut the required number of strips. The stripes, depending on the pattern, can be overlapped or end-to-end. Cut with a small margin along the length, it will then be removed with a knife, the uneven cut will be buried with ceiling and floor skirting boards.

Practical advice. The most difficult thing is to glue wallpaper in the corners of the room. The fact is that they can have slopes, and this has a negative impact on quality. To prevent such consequences, never make joints in the corners of the stripes, try to have them in the middle in these places.

1. Glue the strip smeared with glue to one wall of the corner, align it strictly vertically.
2. Bend the wallpaper carefully, but not all the way to the corner, lightly glue the strip to the second wall.
3. Slowly start bending the wallpaper towards the corner, while constantly monitoring the offset of the second edge, it should always be upright. The corner of the wall is uneven - not a problem, let there be air pockets in some places, the main thing is that the edge of the wallpaper on the second wall is vertical.

If you do not follow this nuance, then on the entire adjacent wall the stripes of wallpaper will be sloped, and this is a big marriage.

For spreading with glue, you will need a large room, the bathroom, as a rule, does not have such dimensions. Decide where exactly you will prepare the wallpaper. Take measures to prevent contamination of floor coverings, do not allow glue to get on the front surface. When wallpapering walls, neatness is one of the important conditions for high-quality work.

Squeeze the air out from under the wallpaper carefully. You can use rubber spatulas or rollers. But it is best to do the work with clean, dry hands. This way you will feel unevenness and will be able to eliminate them in a timely manner. It happens that the air pocket is discovered late, several strips of wallpaper have already been pasted on. It's not a problem. Pierce the air bubble with a needle in 2-3 places, after that you can re-press the wallpaper, they will take the desired position.

Cover the switch lightly with wallpaper and make a diagonal cut through it. Carefully cut the edges and press the wallpaper against the wall

Once the glue is completely dry, cut off the excess length and attach the skirting boards. Skirting boards are fastened with liquid nails or in other ways, taking into account the material of their manufacture.

How to renovate a loft bathroom

Quite fashionable among young people, the style is difficult for older people to get used to. Loft style is a method of repairing various premises, including production ones, with minimal financial losses. All structures remain in the same place, construction work on surface finishing is carried out without the use of additional materials. Leave the old plumbing and sewer pipes in the same place, you can remove the old paint from them and apply a new one. No need to try to make them match the wall, on the contrary, use contrasting colors that emphasize the placement of the pipelines. If you identify problem areas, immediately eliminate the malfunctions.

As for the walls, you can remove the old plaster to the brick, throw in large depressions with cement-sand mortar, but do not level or rub. Rub the brickwork with a wire brush, try to highlight the position of each brick. The older the seam and the brick, the better, the more modern the loft will be. Everything should be simple and natural, no plastic sheathing, plasterboard or other finishing materials.

Professional builders recommend finishing the wall section directly next to the bathtub with ceramic tiles, and making the rest of the surfaces under the loft. This approach will allow you to combine modern and fashionable interior design while maintaining the usual level of convenience.

Video - Industrial style loft bathroom

Video - How to save money on bathroom renovation

When organizing repairs in the bathroom, the choice of finishing materials and knowledge of the sequence of work are very important. Redecoration of the premises can turn into a major modernization. This article will explore some interesting bathroom renovation ideas.

photos

Difficult task

A bathroom design project is composed in two ways. You can provide the dimensions of the company premises. The craftsmen will calculate the total cost of the renovation, taking into account the selected style. Further, several models of possible options for re-equipping the interior space of a room are provided. The area of ​​the toilet can be included in the developed project.

The cost of such work depends on the popularity of the company. Many customers may not be satisfied with the finished product. You can choose the style, colors and fixtures yourself. This will not only save money, but also prove yourself as an interior designer.

A sketch of the future bathroom and toilet can be drawn based on samples from construction magazines. It is important to study all the characteristics of materials and devices.

Competent repair depends on the consideration of the following subtleties.

• Procedure. It is necessary to draw up a work plan in advance. This will help not only to reduce the repair time, but also to prevent possible technological violations.
• List of equipment and materials. It is important to calculate the amount of raw materials and make an approximate estimate.
• Sketch. Drawing with detailed placement of all interior items. You also need to create a color scheme. This will help you quickly navigate in the process of work. Craftsmen are advised to sketch from different angles.
• Communication scheme. The plan for connecting the power cables, the layout of the water and sewer pipes is important. The location of these networks and their connections determines the location of plumbing and electrical appliances.
• Equipment dimensions. The plan should be drawn up to scale, taking into account the dimensions of all planes of the room.

The smaller the room, the more detailed the plan. This principle will help to avoid difficulties with the placement of devices and will help to reduce the cost of purchasing cladding materials. The space should be as functional as possible. It is necessary to provide an unobstructed approach to any point in the bathroom. To visually expand the space, masters recommend using gloss in the cladding.

The more reflective surfaces in the room, the larger the room appears. Large mirrors will visually expand the space. Glossy panels are mounted to the ceiling, increasing the height of the walls. The use of light colors in the cladding materials will also help create the illusion of a large apartment.

It is important to understand that white and its derivatives reflect light well, which makes the room wider.

Among the most popular styles of bathroom decoration are the following:

• Classical. This direction is suitable for those who wish to decorate a room in light shades. Furniture should be refined and elegant. Much attention should be paid to the decor. The classics cannot be imagined without candlesticks, gilded handles by cupboards and mirrors in a baguette.

• High tech. The style of connoisseurs of minimalism and functionality. The room is decorated with cold colors, straight lines and sharp corners. Furniture is chosen with a minimum of decor: simplicity and practicality are appreciated. Plumbing fixtures must be multifunctional.

• Romanticism. This style puts comfort first. Elegance in furnishings and plumbing is important. The highlight of the style is the abundance of hand-painted and ornamental patterns. The decor should make the room feel cozy. Many people buy decorative shelves and cabinets, wicker baskets and soft carpets.

When carrying out work on your own, it is important to familiarize yourself with the sequence of their implementation. The first step is to draw up a sketch of the room, taking into account all communications. It is important to decide whether you need to change the bath bowl. The device can be updated with acrylic. If it is necessary to free up space, it is recommended to install a shower stall. In the modern plumbing market, you can buy a shower with a corner bath.

After drawing up plans and estimates, dismantle the old finish and disconnect unnecessary devices. The bathroom bowl must be removed even if it will not be replaced. The dimensions of the device interfere with finishing work. All construction waste is taken out, the surfaces are completely cleaned.

Assess the condition of the walls: whether there is a need for a complete replacement of the cladding. If the coating is not very deformed, then the finish can be partially corrected.

An empty room is completely measured. Based on the data obtained and preliminary sketches, an estimate is made. Calculate the total amount of materials and tools. Craftsmen recommend purchasing finishes with a reserve of about 15 percent. The list includes pipes and plumbing fixtures.

Further, the surface is repaired. The laying of pipes and electrical cables must be carried out according to a previously drawn up plan. In some cases, you will have to cut through the grooves and seal them at the end of the installation of the pipes. The walls are plastered and leveled. The floors are poured with concrete if necessary. The issue of the placement of ventilation is decided when carrying out work on the processing of the rough surface.

The decoration of the premises is carried out after the installation of ventilation ducts. Work begins with the decoration of the ceiling, then moves along the walls and completes the repair with the finishing laying of the floor. After complete drying of the room, plumbing fixtures are installed. All joints are treated with a sealant. The room is dried again, electrical appliances are connected.

The final stage is the placement of accessories. The list of these works is quite impressive, but it is not too difficult to cope with the repair on your own. You just need to follow the instructions and not violate the work technology.

It is very important to choose quality materials and not skimp on protective equipment.

How to Prepare?

The preparatory stage includes drawing up drawings and carrying out work to dismantle old coatings and devices. In a panel house or in a "stalinka", in order to disconnect the pipes, it is necessary to shut off the water. Further, with the help of a welding machine, obsolete pipe sections and risers are cut off. The work must be done carefully - there is a risk of damage to communications in the house.

Dismantling can be done by hand, but it is better to contact a specialist.

The holes from the communications are covered with foil to prevent debris from entering during the repair process. Next, remove the old finish from the surfaces of the room. It is advisable to clean up to the concrete base. A new coating on a concrete sub-wall will last longer. The paint and plaster are removed with a metal brush, the ceramics are crushed with a perforator. You can reduce the amount of dust by moistening the surface. Remember to wear a protective mask.

If a crunch is heard under pressure on the tiles, the ceramic panel has come off the surface. This mosaic is immediately removed. The tiles on the walls are tapped. A booming sound means there are voids. Fragments with visible cracks must also be dismantled. If the room has a suspended ceiling, remove it. The door is removed along with the box.

There are several ways to dismantle the old cladding. With a sparing method, the grout is soaked. The soft glue does not hold the ceramic well, so the fragment can be carefully removed. The necessary tools in this work are a hammer and a chisel.

The emergency method consists in dismantling the ceramics using a perforator. This process is quite noisy and leaves a lot of dust, but it saves time. Many employ a team of craftsmen. The work is carried out in record time, leaving a perfectly cleaned surface.

On the basis of the drawn up plan for laying communications in the walls, grooves are punched. They are intended for fastening the pipeline. In order not to make holes in the walls, it is necessary to transfer the pipes to the sanitary area of ​​the bathroom. After complete cleaning of the surfaces, you can start leveling the walls and floor.

You should not save on the purchase of plumbing fixtures. Inlet taps must be of high quality, since it is quite difficult to replace the system. Removing taps involves detaching risers and is not cheap. The pipes should be immersed in the walls. The process can take a long time, but the protruding parts of the communication will not spoil the interior of the room. For electrical wires, similar grooves are cut in the wall.

Some nuances should be taken into account in the work:

1. Avoid cavities between finishing materials and main structures. Due to the high humidity in the bathroom, fungus quickly forms in the spaces. Walls should not be covered with plastic panels.
2. The materials must have a high protection against decay. It is not recommended to purchase hygroscopic analogs. Dyes must have an anti-corrosion effect.
3. If the bathroom is small, then it can be combined with a bathroom. Such redevelopment should be agreed with specialists. Capital walls cannot be dismantled.

Professionals can be hired to do some of the jobs. Certain repair steps are easy to carry out with your own hands. To save the budget and build a reliable structure, experts advise alternating the work of professionals with work with their own hands.

When carrying out cosmetic repairs, this advice remains relevant. The owners can paint and finish on their own. It is better to entrust communications with masters.

Before starting work, it is necessary to turn off not only the water supply, but also the electricity. The apartment must be completely de-energized before cutting the cables. During work, it is important to remember the safety rules. They work with materials according to the attached instructions. The room to be treated must be regularly ventilated. Do not apply the material to a surface that is not intended for this.

New communications

Home communications include sewerage, plumbing and wiring, ventilation. During the repair process, the ventilation ducts are not touched. You can change the grill if a lot of dirt has accumulated on the old one and the draft has decreased. The grille must match the surrounding finish.

In an old house, for example, in "Stalinka", the sewage system consists of cast iron pipes. Such structures must be dismantled. Heavy communications are replaced with plastic products.

It is important to organize the piping to all water supply points. The location of the washbasins, bathtub and washing machine is planned in advance. On the basis of the received scheme, the pipe laying is planned.

The lower the pipes are laid, the more freely the water moves along them. The minimum slope of the drain is 5 degrees. To obtain the desired slope, the shower cabin can be installed on the podium. Plastic products are soldered with special equipment. It can be rented. Strong kinks in communications should be avoided.

Estimate

A preliminary estimate will allow you to consider various options for possible finishes and choose the best one. With the help of well-calculated costs, you can get the most cost-effective repair option.

The calculation of the cost of work begins with the choice of the contractor. You can entrust the work to professional workers. Their services will cost a separate amount. You can repair a bathroom cheaply and beautifully with your own hands. In this case, most of the costs are the purchase of building materials. The amount of raw materials is calculated based on the area of ​​the room. The repair calculator is perfect for this task.

To work in the calculator you need:

1. Measure all surfaces of the bath.
2. Make a drawing to scale, taking into account the actual dimensions of the walls, ceiling and floor.
3. Find the right facing material.
4. Find out in what form the material is being sold. These can be packages or bags. The panels are sometimes purchased individually. It is important to know the volume or weight of the material.
5. Calculate the estimated consumption of the required material. The calculator finds the desired value based on the data on the size of the material and the surface area.
6. Add fasteners to the raw material to support panels or pipes.

The resulting data are added and the total cost of the repair is obtained. To reduce costs, you can purchase some of the cladding materials from the economy class store. But you shouldn't buy plumbing there.

Linear measurements are taken with a tape measure. Each surface is measured in one meter increments at several fixed points. This will increase the accuracy of the work. Some older houses have complex geometries. To measure the floor of such an apartment, it is necessary to divide a complex area into simple shapes, calculate the size of each component and add up the results. The value must be rounded up to the nearest whole number.

Next, the height of the walls is measured, the resulting value is multiplied by the dimensions of the floor, and the area is considered. After all the values ​​are found, a plan of each plane in the room is drawn. Based on the calculated values ​​of the areas, the total amount of materials is calculated.

The most common option for finishing a bathroom and a bathroom is tiles. The tiles are available in various sizes, square and rectangular. Most often, squares with a side of 0.3 meters are purchased on the market. The area of ​​such a fragment is 0.09 square meters. The area to be covered with tiles is divided by 0.09 and the required number of fragments is obtained. Craftsmen advise to purchase tiles with a margin.

When choosing a finishing material for walls, it is advisable to take rectangular tiles. The dimensions of such fragments are 0.2x0.3 meters. The area of ​​the piece is 0.06 meters squared. Tile consumption for wall cladding is calculated in the same way as for floor decoration. Before laying the panels on the wall, it is customary to level it. The amount of surface treatment material depends on the unevenness of the wall.

It is preferable to arrange the ceiling in rooms with high humidity with a suspended structure with aluminum panels. These ceilings have many color options. Another option for decorating the ceiling is to trim it with plastic without seams. Economy class ceiling - plastic under the lining. Its cost is significantly lower than its aluminum counterpart.

In order to save on building materials without losing the quality of the structure, the masters advise you to follow the following rules:

• Refusal of expensive finishes. Cheaper counterparts often have no less high crack resistance. Modern companies produce ceramics with imitation of natural stone. Natural material is expensive, but mosaics are much cheaper.
• Phased work. The masters suggest that you first purchase all the facing materials and decorate the room. The second stage is the purchase of plumbing and its installation. Some time may elapse between these stages.
• Carrying out work on your own. In this case, they save on the refusal of the services of construction companies.

When attracting masters, it is necessary to carefully study the provided estimate. The best option in this case is to work together on calculations. This will avoid unnecessary waste.

If the work is supposed to be done on their own, then the cost of the work is zero, if with the involvement of specialists, then everything depends on the list of work performed. The calculation also needs to include the cost of work. It is better to entrust work with electricity to specialists.

The masters distinguish the following types of this work:

1. electrical wiring - cable routing and fixing;
2. installation of sockets and switches.

You should be prepared for the fact that the final costs may be a quarter higher than the estimated values. Additional material is often required to eliminate defects that have arisen in the process. Sometimes you have to re-screed the floor or install the panels. A change in design can increase costs.

Materials (edit)

Old cast iron and metal bathroom pipes need to be replaced. There is no need to buy new steel structures. Metal is inconvenient to deliver and install, such an installation is not reliable. In addition, prices for steel pipes are quite high. Craftsmen recommend using polypropylene or metal-plastic.

Reinforced-plastic communications cannot be hidden in the wall. The joints of such pipes are quite vulnerable. The risk of leaks is high. If such a structure is covered with wall panels, then the destruction of the pipes cannot be detected and quickly strengthened. Leaks can cause fungus. The pipes will collapse, and communications will have to be completely dismantled.

Polypropylene is connected by special welding. The resulting cast structure can be safely sealed into the wall. Polypropylene pipes have a large assortment of products, allowing you to get a design of various levels of complexity. The multi-branch system is able to cope with the high pressure of water, so its service life is quite long.

Installation of polypropylene pipes is quite simple. The pipes should be connected by welding on a special device. Such a tool will have to be purchased additionally.

It can be rented - many construction companies provide equipment to novice craftsmen.

Another equally important material for bathroom renovation is tiles. The choice of ceramics should be taken seriously.

Consider the following points:

• Tiles for installation in rooms with high humidity should have a water absorption coefficient of no more than 3%.
• Consider the size of the tiles. Large fragments are not suitable for finishing a small room. In order to get a drawing of the desired size, you will have to cut the ceramics into pieces. Too much waste is generated during such work. The larger the panel size, the more difficult it is to lay it flat.
• Do not purchase packages from different batches. Such samples may differ slightly in shade. In natural light, this color difference can distort the look of the bathroom. The sizes of tiles from different batches may also have some differences. The difference between ceramics can be up to several millimeters. Such tiles should not be laid on the floor.

• Check kits for cracked and broken tiles. It is important to avoid all kinds of chips and damage. Do not believe that there are no packages without defects. Choosing a good product can cut costs.
• The reserve for laying tiles in horizontal lines should be ten percent of the total number of tiles. When choosing a diagonal masonry, it is necessary to increase the reserve to 15 percent. Diagonal laying is not obtained by beginners the first time.

Each type of tile is marked with a specific color. The first grade corresponds to red, the second - blue. Tiles of the third grade are marked in green. Among the ceramics of the first grade, a 5% deviation can be found. This phenomenon is permissible. Among the tiles of the second grade, the defect may contain a quarter of the entire batch. When choosing a batch of the third grade, you will notice that each fragment is slightly different from the norm.

Porcelain stoneware is best suited for laying the floor. Floor tiles must have a rough surface and high strength. When choosing a material for rooms with high humidity, it is necessary to evaluate the samples for the presence of surface cracks. Defects in the form of dots or micro-arcs are also unacceptable. Even the smallest cracks will significantly reduce the strength of the surface and can lead to mold growth.

It is impossible to clean such a surface. Masters advise to immediately weed out fragments even with the smallest defects at first glance.

PVC panels are great for wall cladding. The material has a wide palette of shades and is suitable for every decorative solution. Standard panel lengths range from 2,400 to 3,700 millimeters, and sample widths range from 125 to 300 millimeters. The thickness of PVC does not exceed 12 millimeters, so the material is easy to process. This option is perfect for installation in a small bathroom.

The panels are moisture resistant and hygienic. It is customary to install the coating on a frame made of wooden beams or galvanized beams. PVC adheres perfectly to the concrete rough surface.

But such walls must first be carefully processed, to smooth out all the irregularities. The ribbed surface will not support the panel.

PVC are connected to each other using tenon grooves and locks. Such panels are attached to the frame with brackets and self-tapping screws. Complete with the panels, special elements of the profile are purchased - corners and strips. The finished surface looks monolithic, since the connecting seams are practically invisible.

Some of the panels in the corners have to be cut, so it is necessary to purchase 2 panels more than the estimated value. PVC is attached to a smooth treated surface with liquid nails or staples. Plastic corners are suitable for masking gaps between the panel and the adjacent surface.

Decorative plaster is suitable for bathroom interior decoration, as it tolerates saturated humid air well. Modern materials are resistant to chemicals in detergents. An important rule of applying plaster: the coating must be laid on a smooth surface. Rough walls must be well leveled.

You can prepare the wall using sanitizing plaster - the material provides the necessary waterproofing.

Venetian plaster is a favorite of many construction companies. The smooth surface is distinguished by a wide range of shades and colors. The material does not absorb moisture, it is able to maintain its original appearance for a long time.

Unlike Venetian plaster, textured plaster retains moisture droplets. It is better to leave such material for the decoration of bedrooms and living rooms. In conditions of constant contact with water, it will quickly collapse.

Before decorating the ceiling, you need to decide on its type. Craftsmen distinguish stretch, rack and plasterboard ceilings. PVC panels for ceiling cladding are chosen by those who wish to reduce repair costs. Plastic is installed on rails and profiles, the installation of which does not require a lot of money and time. On the market you can find panels with an unusual design - glossy gilded surfaces.

Ceiling panels are available in various colors and shapes. Rectangular or square pieces will allow you to embody any daring design idea at a minimum cost.

To obtain a complex multi-tiered structure, craftsmen use drywall. With the help of this material, you can get complex shapes in which lamps are mounted. It is important to understand that such a system will only look spectacular in a large room.

Among the materials, experts distinguish moisture-resistant drywall. Its surface is painted green.

Stretch ceiling - elastic vinyl. Basically, this design is used when decorating living rooms, but there are exceptions. The reflective surface of the film visually raises the ceiling.

The glossy surface accumulates condensation, so experts advise giving preference to a matte stretch ceiling. It goes well with ceramic or plastic wall cladding.

• Laminate. When choosing this type of cladding, it is necessary to focus on its moisture resistance. If the panels do not have this property, then the floor will have to be changed very soon.

• Tile. The most optimal choice of flooring. The tiles must be laid in a joint without seams and cavities. Each piece must be tapped after laying.

You should not choose a mosaic with a glossy surface - it is too traumatic. An interesting option is pebble tiles.

• Cork. The surface of such a floor will be soft. Cork is a natural material, so the price can be high. As with laminate flooring, a moisture resistant sample should be selected.

• Fill. Self-leveling floor is a novelty in the modern materials market. Such a surface can be both finishing and serve as a base for subsequent painting. The floor with a three-dimensional pattern will look interesting.

Calculations

The calculation of all the necessary facing materials was described earlier in the preparation of the estimate. After dismantling the old coatings and completely cleaning the premises, the height of the walls and the floor area are measured. To obtain accurate measurements, the room is repeatedly measured from different control points. Experts advise choosing at least three points.

The choice of plumbing is an important step. The technique must be included in the estimate. The correct selection of equipment plays an important role. The duration of the work can be significantly reduced by choosing the appropriate instruments. Installation of water supply largely depends on the choice of taps and mixer.

It is important to familiarize yourself with the installation features of each type of device in advance. Built-in appliances cannot be used in panel houses - it is impossible to install a wall niche in such a room.

The calculation of the pipeline is an equally important task. The connection of each device to the water supply and sewerage system should be reflected in a preliminary estimate. It is important to take into account the normalized pipe laying angles that ensure uninterrupted water flow. It is possible to design the laying of communications, relying on the old arrangement of devices. If the devices were inconveniently located, then a new scheme is drawn up. In this case, it is important to outline the location of future pipes on the wall and measure everything.

Further, the estimate includes the number of pipes and valves. To connect pipe fragments in the room of a panel house, it is necessary to use plastic fittings. Metal parts are installed at the joints of the pipeline with devices that consume water. These fasteners provide a vacuum connection to the pipes. Leakage of plastic fittings is not a problem.

When laying PVC pipes, plastic fittings are used. The mechanisms are soldered into the plumbing made of polymers. The connection of the reinforcement to the metal is provided by a carved branch pipe with thickened walls. This technique ensures long-term operation of the devices. All materials must be purchased in accordance with the area being designed. It is important to take pipes and fittings with a margin.

Purchasing a sufficient amount of tile adhesive is an equally important task. The consumption of material for wall cladding is approximately 3-4 kilograms per square meter. The substance must harden slowly so that installation errors can be corrected.

What is the right way to start?

It is necessary to start repairing with the preparation of plumbing. They remove everything old, disconnect communications in those places where replacement of pipes is necessary. Laying of new circuits will be carried out according to a previously drawn up plan. At the initial stages, the steel structures are cut off, the holes are closed from debris.

It is important to remember about the preliminary shutdown of water and electricity.

The process for preparing the floor and walls is the same. First, the old material is removed, the debris is removed and the surface is leveled. A high-quality concrete screed should not be removed. The process of pouring concrete is very time-consuming and laborious. In addition, cosmetic repairs include only work with facing materials.

Renovation is carried out in accordance with existing standards. If the screed meets all the necessary requirements, then re-pouring is not necessary.

You can improve the coverage by applying a self-leveling mixture. The thickness of the concrete on the floor, in accordance with the building regulations, must be up to 3 centimeters. In a panel house, you can arrange self-leveling floors. This will significantly save money. The resulting coating can be either finishing or rough for subsequent drawing. Colored pigments are often added to the fill to create a beautiful colored floor.

The floor is leveled before pouring. To prevent possible damage to the coating, it is necessary to isolate the surface from contact with water. Polyethylene is not the most reliable material for protecting floors from moisture. It is used for economy class work. For rooms with high humidity, polyester is recommended. Film sheets are overlapped on top of each other.

Polyester joints are fused under high heat. For this, a construction hairdryer is useful in work. The edges of the film are brought onto the walls with the formation of folds in the corners. Properly laid insulation is able to withstand the influence of about 4 tons of water over ten squares of area.

In order for the protruding pipes not to spoil the interior of the bathroom, the water supply wiring is placed in specially drilled grooves. This option is quite time consuming, the work is dirty. In addition, not every wall can be drilled. In new buildings, the device of grooves is strictly prohibited - you cannot change the integrity of the structures.

In this case, the masters recommend to bring all the pipes into a bundle and lay it around the perimeter of the room. When the correct location of the communications is found, and the pipes are fixed, they are covered with galvanized slopes. The resulting box is decorated with PVC panels and treated with a sealant.

With this method of positioning communications, it is better to select pipes from polypropylene - the material eliminates leaks.

Maintenance of pipes in the box is not very difficult. The mixer can be repaired as follows. To do this, the slope is carefully cut off, defects are eliminated, the panel is glued to its original place. The dimensions of a standard bathroom allow you to make a box with a length of about one meter. The rest of the pipes will not be visible due to appliances or a washing machine.

The process of dismantling communications begins with the sewer. The piping to the plumbing fixtures is hidden under the corrugation. The structure can be coated with paint. For a heating device, it is recommended to make a choice in favor of purchasing metal-plastic pipes. This material bends easily. A towel dryer can be easily assembled from these pipes.

When facing walls, it is necessary to maintain equal gaps between the panels. For this, special plastic crosses are installed on the plane. They define the width of the seam. Holes are drilled in advance in the places where the communications are output. The corners and joints are filled with silicone sealant. It is necessary to apply the glue mass carefully. The dried composition will be very difficult to remove from the surface.

A solvent must be used to remove dry sealant. After applying it to the glue, it becomes soft and can be easily cleaned with a rag. The chemical composition of the substance may cause some damage to the coating. To avoid this, the masters advise using mechanical cleaning. Grouting with dry sponges and spatulas should be done carefully. Strong pressing can leave scratches on the finished surface.

The tile adhesive must be water resistant. Using a notched trowel, the substance is gently spread over the surface. Do not take a tool with too large teeth. The evenness of the masonry of each element is checked by the level.

The tile should not protrude too much, such fragments are driven into the surface with a hammer. If these manipulations do not bring any result, then the fragment is disconnected and excess glue is removed. Sagging mosaics, on the other hand, require the addition of a sealant.

After the cladding has frozen, work is carried out to install plumbing and ventilation devices. The connection of electric bulbs and the installation of sockets is carried out in parallel.

Procedure

The step-by-step procedure for overhauling a bathroom includes the following steps:

• Drawing up drawings and diagrams. The project should include the selection of all materials and devices, the calculation of the total amount of raw materials, taking into account the stock. Drawing up a color scheme of the interior.
• Preparatory work. This set of measures includes cleaning the premises from unnecessary items and installations, cutting pipes and cables and dismantling the existing cladding.

• Analysis of the condition of the floor. Assessment of the quality of the concrete screed allows you to draw up a work plan to eliminate coating defects. Installation of thermal insulation and moisture-proof film. Re-pouring a concrete screed with subsequent leveling or installation of a flooded floor on a rough base.
• Laying of contours of water supply and electrical wires.

• Rough finishing of walls with plaster, laying of insulation panels with subsequent finishing. Ceiling decoration.
• Laying the finishing floor covering.

• Installation of ventilation and installation of plumbing equipment.
• Furnishings.

The most budgetary option for finishing the ceiling is leveling with subsequent painting. The paint can be applied in several layers throughout the entire life of the room. In this case, leaks from neighbors are not terrible and can be easily eliminated. If desired, you can install a complex plasterboard structure.

Tiered ceilings are suitable for owners of large apartments. It will be interesting to look at the alternation of glossy panels with matte ones. A complex ceiling must be drawn to scale in advance. Attention should be paid to the location and installation of luminaires in such a system.

If you want to depict a complex tile pattern on a wall or ceiling, you must also first draw up a sketch of it. There are several ways of laying tiles, and the craftsmen will help you choose the least complicated and most beautiful option for this interior.

If oil paint was previously applied to the rough surface, then the area must be treated with "Betonkontakt". This mixture will increase the adhesion of the ceramic to the wall.

The installation sequence of plumbing fixtures depends on their type. Installation must be carried out in accordance with the attached instructions. It must be checked that the bath bowl is horizontal. The device is leveled by adjusting the length of the legs.

If you want to close the side of the bath with ceramics, it is important to leave the hatch. The dimensions of this inspection hole must be able to control the water supply.

When connecting the bath to existing engineering systems, work begins with the supply of a siphon. Work is carried out using a corrugated hose. To assess the tightness of the device, experts advise passing about 20-30 liters of water through the siphon. The hose is pre-wrapped with a dry cloth. If the test is successful and there are no wet spots left on the rag, then the bowl is grounded.

The installation of a washbasin depends on its waste system. With a combined bathroom, a toilet is connected to the room. The connecting line must be hidden so that the bathroom interior does not deteriorate. Suspended systems of plumbing fixtures are widely used. The use of such units saves space.

It is important to know that such a system is not applicable in panel houses.

photos

Residents find it difficult to relate the room before and after the installation work. Here are some interesting bathroom design ideas.

Combined option

The owners of this room carried out the necessary work to combine the bath and toilet. The space visually expanded, there was more free space. The combination of light tiles with blue wall paint creates a delicate look. To enhance the effect of a spacious room, the wall next to the bathroom is completely tiled with light tiles.

The wall cabinet has a similar design to the window. This creates a kind of symmetry in the interior. Color accents are set using decor. A tall vase of artificial flowers brings the room to life. Floor tiles with small patterns do not create ripples, on the contrary, they complete the look of the room.

High tech style

The bathroom in the photo is made in high-tech style. All devices are multifunctional. The cladding and furnishings have clear lines and sharp angles. Soft gradations of color or objects with rounded edges are almost completely absent. The abundance of glossy surfaces reflects light, therefore visually expands the space.

The location of the mirror opposite the opening creates a kind of mirror maze. This gives the apartment an even larger scale. The combination of gray and white is a classic trick in the design of a strict bathroom. Mirrors of an unusual shape with illumination add mystery to the room.

Marine panel

The bathroom walls are completely decorated with the image of the underwater world. The drawing was also applied to the door so that nothing would stand out from the general picture of the depths of the sea. A pleasant drawing seems to give calmness and serenity. The floor masonry is a continuation of the painting. The drawing transfers to the surface so smoothly that the boundaries of the floor and walls are erased.

The elegant blue bath bowl does not stand out from the overall color. The walls are additionally decorated with paintings depicting the inhabitants of the sea. It is worth noting the interesting texture of the floor tiles. Light streaks imitate the reflection of the sun's rays on the water surface. An unusual room completely immerses residents in the ocean world.

Two tiers

The peculiarity of this interior is the use of a podium to visually divide the space. To increase the area of ​​the bathroom, the owners combined this room with a bathroom. It became necessary to divide the room into functional zones. In this case, the podium was the best fit. The highlight of the interior is the illumination of the podium steps.

The raised structure not only visually emphasizes the bathroom area, but also helps to achieve the desired angle of inclination of the pipes near the bathroom and shower. The use of dark panels along the contour of the shower stall visually deepens the room. Wood is also used in decorative elements - in paintings, plinths. The decor of the room looks very rich and elegant.

Nice golden

In this interior, gold-like tiles are widely used. The pleasant shade and glossy surface of the mosaic create harmony. The wide floor tiles contrast with the small fragments on the walls. Gold is well combined with white furniture elements. A sink built into the cabinet saves space.

The main feature of the interior is the bathroom built into the wall. Gold tiles, like fabric, cover the structure. With this solution, the wide bowl seems narrower, so the room looks harmonious. There is not enough furniture in the room, but everything is located correctly.

Deep green

This option is an example of smart bathroom design in small sizes. A very economical option looks laconic and tasteful. The green color on the walls soothes and creates a pleasant twilight. White ceramic looks bright against such a dark background. The towel hook panel is made of transparent plastic, which does not create unnecessary color stains.

A bright accent is obtained using a yellow towel. Yellow and green go well and complement each other. Ceramic appliances with simple shapes and soft edges lend a cozy feel to the room. The mirror reflects the opposite green wall, creating an unusual effect. It is important to know that the paint for wall cladding is waterproof. Such a bathroom will serve its owners for many years.

Bathroom renovation. Bright and relevant ideas with photos

How does a bathroom renovation start? First of all, you need to decide what type of bathroom you want to get in the end: separate or combined.

The first option is especially convenient when a large family lives in the apartment, the second one gives room for design imagination and allows you to equip a room for hygiene procedures with maximum comfort. In order to better visualize the difference between the two types of bathrooms, it is advisable to first look at the photos of bathrooms and toilets after renovation on the Internet or in special catalogs.

When the choice in favor of one or another planning solution is made, it is time to decide on the style. And only after that you can start looking for suitable finishing materials, sanitary ware and furniture.

Bathroom renovation options in different styles

The ecological theme has become the most popular in the design of residential interiors. Not spared this trend and bathrooms. Natural finishing materials, soft, natural shades, soft shapes, without aggressive corners and technogenic expression are current trends that should be taken into account when starting to repair a bathroom.

The most popular styles are still minimalism and modern.

Doesn't it attract? Do you like classic directions more? When choosing repair options, you should not give up on the realization of your dreams for the sake of a changeable fashion. Moreover, the classics are also in trend, only not in their pure form, but as an eclectic mix of several styles.

Combined bathroom, thanks to the increased area , allows you to realize the most original ideas. There are no restrictions for creative and extraordinary personalities today, they can easily turn a standard bathroom into a kind of an art salon, a colonial bungalow or a Victorian living room.

Swimming among such luxury is incomparable pleasure! We hope that the examples of bathroom renovation with a photo below will inspire those who are just thinking about remodeling to a bright design creativity. There is no need to be afraid of the flight of fantasy. The results of such experiments speak for themselves.

Take a look, for example, at these photos of an unusual bathroom after renovation. . Isn't there a lot to learn here?

We create a comfortable environment. Interesting photos of renovation in the bathroom

The bathroom has a special microclimate - there is almost always high humidity, to which a temperature difference is added during swimming. Therefore, it is important to choose the right finishing materials and furnishings if we want to extend their service life.

Advice: if you lack your own knowledge, and you want to make your bathroom really stylish and functional, it makes sense to turn to professionals who offer turnkey repairs. The craftsmen will help you to correctly calculate the materials, suggest the optimal arrangement of furniture and plumbing fixtures, and make a competent layout of utilities. As a result, such a repair will be cheaper than trying to create an interior masterpiece on your own, when, due to mistakes made, you will have to pay for alterations.

Choosing finishing materials. Actual trends

The global trend in bathroom decoration is ceramic tiles "hog" or its western counterpart - "metro". It has an oblong shape and beveled edges that add extra volume. Such a tile is equally appropriate both in a spacious bathroom of a country house, and where the total area of ​​a bathroom with a toilet is 4 square meters. m.

It is recommended to combine "Pig" with other types of tiles - large rectangular, square or mosaic to create a dynamic look. In addition, you can use the tiles selectively, only for surfaces that are in direct contact with water (shower room, apron over the washbasin), and cover the rest of the walls with moisture-resistant paint or wallpaper.

Photo of the renovation in the bathroom, partially or completely finished with "hog" and "metro" tiles.

Photo of renovation of bathrooms and toilets with an interesting combination of different types of finishes.

Tip: in small rooms, no more than two types of tiles can be used, while it is advisable to keep them in the same color scheme. It is better to lay the flooring diagonally - this technique visually expands the space. It is undesirable to choose large-sized tiles for a chamber bathroom, especially if it has a relief texture. Such a finishing material is intended only for spacious rooms with good lighting.

It is more correct to refuse plaster or acrylic paint in small bathrooms altogether.

How to save money on bathroom renovations without sacrificing quality

Do you want to "freshen up" the bathroom, but do not have enough funds for expensive finishing materials? Practical and budgetary plastic panels, often undeservedly forgotten for the sake of traditional tiles or plaster, will come to the rescue.

But unpretentious plastic has many advantages:

• Low price, thanks to which it will be possible to change the appearance of the bathroom much more often. This means that new positive emotions and a super-fashionable interior will appear.

• Quick installation - professional craftsmen will completely cover a small room with "clapboard" and hand over "turnkey" in one day.

• Resistant to high humidity and temperature extremes.

• Hygiene, ease of care.

• Design variability. Manufacturers produce a wide variety of PVC panels: imitating ceramic tiles, wood or natural stone, or with photo printing, including a 3D effect.

Repairing with plastic panels will cost much less than finishing with tiles, but the interior will look no less elegant. You can easily verify this by looking at the pictures below:

Repair of a small bathroom with a photo

Restricted bathrooms require a special approach. Here you need compact (preferably corner) furniture and plumbing, a minimum of decor, only light colors in the decoration.

Tip: Instead of standard storage units that take up space and make the room even tighter, you can use the empty space under the bathroom, above the door, directly on it or between the frames of the cantilever toilet.

Having looked at the professional bathroom and toilet repairs, the photos of which are presented in this article, it will not be difficult to create a stylish, cozy and exclusive bathroom in your home. It is important to focus on our own preferences, because what real "comfort" and "beauty" is, each of us understands differently.

Today, individuality is in vogue - you can drop the conventions and just be yourself!