Cleaning an electric kettle from scale at home. How to clean a kettle from scale at home quickly and effectively How to clean a plastic kettle from scale

Reading 5 min. Published on 01.05.2019

An electric kettle is an almost indispensable household appliance. With it, you can quickly and easily boil water for making tea or coffee. It does not need to be monitored, after boiling it will turn itself off and will not waste electricity. But even the most modern electric kettle requires care and regular cleaning.

Causes of scale

The electric kettle seems to be a device that requires absolutely no maintenance. But if the technique is not given enough attention, over time it may begin to work less efficiently or even break down.

The most common cause of breakdowns is the accumulation of excessive amounts of deposits. They cover the walls and the heating element, reducing the rate of water heating.

Scale in an electric kettle is salts and compounds contained in water and precipitated when heated. It is impossible to completely get rid of this phenomenon. But a set of care measures will allow
using different means as little as possible.

It is important to understand that deposits on the bottom of the kettle are not only a cosmetic problem. They significantly reduce the rate of heating and, if ingested, can cause the formation of sand in the kidneys or aggravate an existing disease.

current care

Proper daily care of the electric kettle will allow global cleaning to be carried out very rarely. In order for salts to be deposited as little as possible, it is important to observe the following requirements:

The container should be cleaned regularly, preferably every evening. Just drain the water and use a sponge to wash the inside.
Do not boil more water than necessary. Salts from the liquid remaining after heating in the kettle will compact the layer.
Use purified water. This will save the technique, and it is more useful for health.

So that maintenance is not too laborious, and the household appliance lasts as long as possible, it is important not only to know how to remove scale in an electric kettle, but also to do it regularly. A thin layer of deposits is much more easily affected and special tools can not be used to remove it.

Virtually any acid-containing products effectively remove deposits. For cleaning electric kettles, you can use both industrial compounds and improvised means.

Special funds

With scale on the walls and heating elements of electric kettles, ready-made compounds that can be purchased at the store in the household chemicals department help to fight. It is quite simple to recognize them, the manufacturer puts an image of equipment on the packaging, the name usually corresponds to: “Anti-scale” and the like.

They should be used in strict accordance with the manufacturer's instructions, do not exceed the dosage and exposure time.

Usually the scheme is simple: the product must be dissolved in water in a certain proportion, poured into a kettle, boiled and left for a while. After that, wash the equipment and use it as usual.

The composition of industrial products contains several types of acids and auxiliary substances that successfully fight salt deposits. It is important to know how to clean the electric kettle so as not to harm the health of the family. You can also use improvised tools that are in every home.

Lemon acid

As part of special funds
is an essential component. It can be used to clean your equipment quickly and efficiently. And what is especially pleasant, such care will not cost at all.

For one treatment, you will need 1 sachet of acid containing 25 g of the substance.

You should act according to the following scheme:

Take a full kettle of water and pour the contents of 1 sachet.
Bring water to a boil and turn off the appliance. Care should be taken, as the solution may begin to foam when boiling.
Leave for 30 minutes to take effect. After drain the composition.

The effect is based on the chemical reaction of converting citric acid into acetic acid.

After cleaning, thoroughly wash the equipment and boil clean water in it. This will help get rid of the smell. If necessary, repeat all manipulations.

food vinegar

The food grade vinegar found in every kitchen is acetic acid diluted to a safe concentration. With it, you can clean the kettle quickly and efficiently.

Pour vinegar solution into the kettle (1 part 9% vinegar to 2 parts water). Bring the composition to a boil and turn off the device. Leave until completely cool. After draining the active composition and thoroughly wash the container with a moderately hard sponge.

The acid will soften the scale and can be easily removed.

After cleaning, the equipment must be thoroughly washed and boiled with clean water several times. This will help get rid of the specific smell of the acid composition.

Baking soda

Soda is a fairly active substance, which can remove even a large layer of scale. It is worth turning to if a milder effect does not bear fruit.

Pour water into the kettle and add a tablespoon of soda to it. Boil and leave the composition to act for several hours. The alkaline solution will soften the deposits and they can be removed with a sponge.

If this action is not enough, you can repeat the procedure or add citric acid to the water instead of soda at the rate of 1 sachet per 1.5 liters of water. Boil the solution and leave for an hour.

After that, traditionally clean the surface with a sponge.

Carbonated drinks

Most carbonated drinks contain citric acid. It is she who will help to cope with scale in the kettle. The method of removing deposits with drinks is passed from mouth to mouth and is considered effective, but it also has features:

Choose colorless drinks. Dyes, especially bright ones, can leave stains that are more difficult to clean off than salt deposits.
Partially degas the liquid before use. Otherwise, in the process of boiling, the drink will foam, pouring everything around.
The drink should be poured into the kettle, boiled and left to act. In just an hour, the scale will begin to move away in layers and it can be removed mechanically.

Before cleaning the electric kettle, it is important to warn all family members about it. Liquids and compounds used for such work are colorless, they can be confused with ordinary water. A few sips of citric acid solution will not bring significant harm, but negative emotions are guaranteed.

In order for the electric kettle to continue to remain an indispensable assistant, it should be cleaned regularly, preventing the formation of a significant layer of scale. It is enough to boil the acid composition every few weeks, and the heating elements of the equipment will shine with cleanliness.

How to descale an electric kettle - many housewives ask this question. Undoubtedly, an electric kettle is a convenient and practical thing that will always come in handy. However, from time to time scale forms inside this device, and if it is not dealt with in a timely manner, then it will be very problematic to eliminate it later. That's why descaling procedure it is important to produce on a regular basis.

Causes of scale formation

As you know, in order to deal with any negative phenomenon, it is necessary to know the causes of its occurrence. Magnesium and calcium, which are part of tap water, as a result of its boiling, form the very notorious plaque. In addition to these substances, other salts are usually present in the composition of water. From the tap to kitchen the carbonate type of water flows, which determines the degree of its hardness, which can be either medium or high.

Tap water is the main source of plaque on the kettle

The main reason for the appearance of scale is the high level of hardness of tap water. Because of this, when water boils, a large amount of salt is released, which eventually settles on the inner walls and bottom of the kettle. At the same time, due to scale, the service life of electronic kettles can be significantly reduced. That is why it is advisable to clean it regularly.

Initially, scale during its formation has a porous structure. In this state, it can be easily removed with the help of improvised means. But if you do not regularly clean the kettle, then this greatly increases the difficulty of cleaning it. Thus, the more times we boil water, the faster scale will form in the kettle. In critical cases, scale covers the walls and bottom of the kettle in several layers, which are difficult to get rid of.

Classic ways to clean the kettle from scale

Scale is mainly formed on heating objects inside the kettle, as well as on it and the bottom. These are the parts that need to be cleaned.

There are several ways to quickly descale an electric kettle. Traditionally, the following means are used to combat annoying scale: vinegar, soda, salt, citric acid. Proponents of more modern approaches suggest using Coca-Cola. Useful on the farm and brine, and even potato peelings. When using these funds, you do not have to spend extra money.

Other, more modern, options for dealing with scale involve the use of purchased chemical compounds, such as, for example, Antinakipin. In this case, you will already have to spend money on their purchase. To begin with, consider folk ways to deal with scale.

Some folk remedies for getting rid of scale

Perhaps the most famous folk remedy for scale is the use of citric acid. This is a simple and at the same time quite effective way. First you need to pour a tablespoon of citric acid into the kettle and fill it with water. Then boil the water. Next, you need to thoroughly rinse the kettle under running cold water and boil it again.

With this tool, you can perfectly clean the walls of the kettle, however, many "testers" of this method complain that in this way you will not be able to overcome the scale that has formed on its bottom. It all depends on the kettle and the scale level.

Descaling an electric kettle with citric acid is a reliable and proven way to get rid of plaque. However, if the described methods do not suit you, or you do not have the necessary "incidents", then there is another popular way to remove scale. Consider how to descale an electric kettle with vinegar. By the way, this tool can also be useful in.

Tip: for these purposes, it is better to use 9% table vinegar.

Pour 1.5 liters of water and 200 ml into the kettle. vinegar. Let the resulting mixture stand for about 20 minutes. Then boil water with vinegar. Then the kettle must again be rinsed with water. Pour in fresh water and boil it several times. Drain and rinse the kettle again to remove any residual vinegar. As a result, you will get an absolutely clean and shiny teapot from the inside. However, if the scale has been formed for a long time and hardened too much, then it may not be completely removed. However, this method has one drawback - this is the smell formed when boiling vinegar, which fills the entire kitchen. Unlike vinegar, citric acid does not leave an unpleasant odor after its use.

Folk remedies against scale using soda

Another folk way to deal with scale involves the use of soda. As in the previous "recipe", we will need one tablespoon of the ingredient (i.e. soda). Fill it with water exactly as far as the kettle allows. Then water with soda should be boiled and be sure to rinse the kettle with tap water.

Tip: For the best effect, if necessary, rub the scale with a sponge with a rough side.

Then you need to pour water into the kettle again and boil it. It is better to boil the water and drain it twice so that the last remnants of soda disappear.

Thanks to this method, the scale on the walls and bottom of the kettle becomes looser, which makes it much easier to remove. However, this method does not guarantee complete descaling. Nevertheless, the effect will be noticeable. For the next descaling option, in addition to soda, you will also need salt. Pour two tablespoons of baking soda into your kettle. Fill it with water and add a spoonful of ordinary table salt to the resulting solution. Then the water in the kettle should be boiled. For the best effect, leave the resulting solution in the kettle for about 10 minutes, then pour out all the water.

Then the kettle should be rinsed from the inside with tap water. And boil the kettle several times, after filling it with new water. So you finally remove the remnants of the mixture. It is enough to do this a couple of times.

Kitchen utensils are an item by which the abilities of the hostess are assessed. If the pans shine, you have a real craftswoman in front of you.

Another thing is the kettle. Washing its outside is no more difficult than peeling off a pan. And the interior usually leaves much to be desired.

It's all about the fluff. Water in Russia contains many impurities.

In some regions, it is soft - it is impossible to wash off the soap from the hands, it is difficult to wash clothes. In others, it is too rigid, which is also not good.

Scale inside the kettle is a sure sign that you should buy a filter. After all, water makes up a large part of our body, it is contained in all products: in the first, second and third courses.

Water is synonymous with life. And it is important that it is of good quality. And simple folk remedies will help to cope with formations.

In most regions of Russia, the water is hard. This factor is due to the presence in its composition of two elements: calcium and magnesium.

The pure formula of water is extremely rare. Even cleaning with filters does not free the liquid from all substances.

Tap water contains various substances: it can be copper, iron, calcium, magnesium. The content of bicarbonates is not excluded.

Iron gives a reddish tint, and copper gives an orange tint. Scale forms on the walls during the infusion process. When the water is boiled, the sediment remains at the bottom, forming a white mark.

Over time, it hardens, its thickness increases. This forms off-white growths that are so difficult to clean.

What to do to avoid scale formation:

Use filters. Some are attached to the faucet, others are used immediately before pouring water into the device.
Even using filtered water involves rinsing the kettle periodically. It is good to wash it with a sponge a couple of times a week.
Using distilled water is a sure way to avoid limescale build-up.
Drain water after each boil.

One of these methods will avoid the problem in the future. Now let's figure out what to do with the already formed scale.

After all, it is not so easy to eliminate it, to return the teapot to its former beauty.

Ways to remove scale with soda, citric acid or vinegar

Folk remedies are the most effective in the fight against scale.

If special purchased compounds with a pleasant smell and an abundance of foam are more often used for washing dishes, then it will be more difficult to wipe off hardened scale with them.

To do this, there are several simple folk remedies. They are in every home, cost a penny and cope with the problem several times faster.

The three best ways to remove scale from the inside of the kettle:

№	Facilities	Description
1	Baking soda	Pour enough water into the kettle to cover all the growths. We fall asleep baking soda: a full tablespoon per 1 liter. Boil water over low heat for 30 minutes. Drain into the sink, rinse, refill the kettle and boil clean water. This process will help remove soda residues, clean the container after the procedure. We also drain this water, and the next one will be already drinkable.
2	soda and vinegar	The method is used if the previous one did not give the desired result. After boiling water with soda, fill the kettle, add a teaspoon of vinegar essence to 1 liter of water. We put on fire, boil for 15 minutes. Pour water into the sink and clean the remaining scale with a sponge
3	Lemon acid	An excellent and gentle way to remove scale. It leaves no odor like vinegar. For 2 liters of water, add 4 teaspoons of citric acid and baking soda. Bring the water to a boil, leave for a couple of hours to cool completely. At this time, pollution is destroyed. Drain, refill the kettle and add only citric acid in the same proportions. Boil, cool and drain again. We clean the remains with a sponge, now it will not be difficult. The particles have become loose, they can be easily removed

Effective removal by commercial means

There are special tools that allow you to remove scale from the surface.

List of funds:

Silit.
Anti scale.
Anti scale Frau Schmidt.
Scamwon.

These products gently clean the surface, do not leave an unpleasant odor. The only negative is that you need to buy them, spend money. Yes, and finding them in a regular store is not always possible.

Important! Thoroughly rinse the kettle after the procedure: chemicals should not get into the stomach, it is dangerous, it can cause poisoning.

Boil the kettle well after washing and drain the water. This is how you protect yourself and your loved ones.

Repeated rinsing with plain water is also suitable: after washing with a sponge, rinse the kettle several times, make sure that the water no longer foams.

Features of cleaning an electric kettle

An electric kettle suffers from scale much more. The resulting deposit on the metal part reduces the efficiency of the device by 30%.

Scale does not transmit heat well, the kettle has to work longer, which leads to overheating, waste of electricity.

How to clean an electric kettle:

Any of the above will work. It is not advisable to just use vinegar as it will leave a smell.
Plastic surfaces absorb odors easily and are harder to release. The product will help, but the smell will remain for a long time.
To eliminate this smell, you can boil the kettle with soda again.
When cleaning with folk remedies, be sure to rub the metal part of the device with a sponge. Wash hard-to-reach places thoroughly.
Do not try to remove scale without the use of products. Do not use an iron float, you will damage the surface, and the dirt will not be completely eliminated.
Try to avoid the formation of scale. Place an ordinary glass jar next to the kettle. Drain the water into it, and leave the kettle empty.
You can put silver things in a jar and you will get water enriched with silver. This is good for health.
Do not allow scale formation: it is easier to prevent than to wash later.

Useful video

Whatever water you use - tap, purchased or spring - sooner or later a white coating will appear in the kettle. This is a scale formed as a result of the deposition on the walls of potassium and magnesium salts dissolved in water. If it is not cleaned regularly, it will turn into limestone. I will tell you about all the ways to remove scale in the kettle without resorting to special tools.

What is the danger of scale and how to avoid it

From what scale appears, it is clear: these are salts evaporated from the water. You can avoid its appearance only if you use distilled water. But it is not only not useful, but also harmful to the body.

However, water scale itself is also not harmless.:

Damage to health. The high content of undissolved salts in drinks leads to cholelithiasis and other physiological disorders;
scale affects the taste of water;
Electricity. The limestone on the bottom and walls of the kettle reduces their thermal conductivity and forces them to spend more energy on heating water. And the heating elements in the electric kettle burn out quickly.

Therefore, the answer to the question of how to remove scale in the kettle will help you solve not only an aesthetic problem. But also to avoid unnecessary expenses and health problems.

Unfortunately, it is impossible to completely prevent the occurrence of plaque. But you can prevent the formation of a thick and hard layer, which is very difficult to deal with.

To prevent a thick layer:

Use soft water. It can be filtered, settled before boiling, or purchased from reliable suppliers.
Do not keep water in the kettle. After each tea party, the leftovers must be poured out and the dishes rinsed.
Clean regularly. Depending on the quality of the water, it should be repeated every 2-4 weeks.

To do this, you can use special tools sold in stores. Their price varies from 20 to 300 rubles, but they act, in my opinion, in exactly the same way. The method of application and the time spent on cleaning may differ - each preparation has its own instructions. But this is not essential.

But you can do without them. After all, in every kitchen there will always be other, more natural means that can cope with this task.

6 ways to get rid of scale

If you do not know how to remove scale in the kettle, look in the kitchen cabinet or refrigerator. You need foods that contain acid. These are vinegar, citric acid or fresh lemons, apples, pickles and even carbonated drinks.

Method 1 - using vinegar

This product perfectly softens even old mineral deposits. But it is quite aggressive, so it is better not to clean the plastic electric kettle. As well as enameled or aluminum.

We act like this:

Pouring water into the kettle so that it covers the entire plaque;
Bring it to a boil and remove from the fire;
Carefully pour a glass of 9% vinegar into boiling water or 2 tablespoons of essence for every liter of water;

Leave for 1-2 hours.

During this time, the plaque will become loose and easily removed with a sponge.

Method 2 - using brine

Pickled cucumber or tomato brine already contains vinegar, so you can use that too to descale your kettle. It is not necessary to dilute it, just strain through a sieve.

The same effect has sour milk and whey, which contain organic acids.

Method 3 - using citric acid

Citric acid is not so aggressive, therefore it is also suitable for aluminum, plastic and enameled metal teapots. You can use both powder and fresh lemon.

The amount depends on the degree of contamination:

1 tablespoon powder or a quarter of a medium lemon per 500 ml of water will remove a faint white coating in the kettle;

twice as much required for a thicker scale layer.

But a large plaque, which has already managed to stick to the walls, citric acid will not dissolve.

The recipe is the same as when cleaning with vinegar: the acid is added to freshly boiled water, and after a couple of hours it is poured out along with the dissolved salts. Their softened residues will need to be removed with your own hands using a dish sponge.

Method 4 - using carbonated drinks

Sprite, Fanta, Coca-Cola and other carbonated drinks contain phosphoric acid, which can also remove scale in the kettle.

They are poured into an empty vessel, stirred to get rid of gases, and then brought to a boil.

When the liquid has cooled, the kettle can be washed.

Method 5 - using apple skins

This method will not help clean the kettle from heavy scale. It is rather preventive, it is used when plaque has just begun to settle on the walls. To get rid of it, it is enough to fill the cleaning in the kettle with water, boil it and pour it out together with the skins in an hour.

In addition to apple, you can use pear skins. or washed raw potato peels.

But this gentle method is suitable for cleaning ordinary teapots made of any material. If you use it regularly, you will not see scale in them at all.

Method 6 - using soda

Another effective home remedy is baking soda or soda ash.

It is applied like this:

Before descaling from the kettle, you need to mix two tablespoons of powder with a liter of water;
Pour the solution into the kettle and put it she fire;
When it boils, reduce the fire and leave the water to boil gently for half an hour;
Then drain the solution, and rinse the dishes and boil clean water in it.

In general, after each remedy listed above, it is recommended not only to wash the kettle, but to boil clean water in it 1-2 times.

What to do with an old plaque

If the scale is old and covers the surface with a thick layer, only a special tool or repeated use of the methods described above can help.

It is best to alternately apply vinegar, baking soda and citric acid, using an increased concentration of the cleaning solution.

Even if the scale does not go away on its own, it will become soft and loose, which will allow it to be cleaned from the walls.

Conclusion

I hope that the listed methods for descaling the kettle will help you always keep your dishes clean. And those who wish can boast of especially spectacular results in the comments.

The video in this article shows the cleaning process - you can see for yourself that these methods work.

Not all kettles will accept the same cleaning methods. Stainless steel cookware is normally machined. An enameled or aluminum teapot is best washed with special household chemicals or gentle boiling. For cleaning, soda, vinegar, citric acid, toothpaste, PVA glue or mustard powder are used.

Most housewives do not remove the kettle from the stove during cooking, which is why stains of grease and dirt appear on it over time. Therefore, the problem of removing such contaminants is quite relevant. But the question arises, how to clean the kettle of fat so that it looks like new.

How to clean kitchen utensils

There are a huge number of different household chemicals with which you can clean the kettle and other utensils.

When choosing a cleaner, you need to purchase a product, depending on the degree of contamination of the dishes.

With small spots of fat that have formed recently, a low-budget remedy can also handle:

Fairy;
Gala;
Naturell.

And with the dirt that has already eaten in and simply does not rub off, strong and expensive chemistry will help to cope:

Mister Muscle;
Shumanite;
Cillit;
Unicum Gold.

But it is better not to bring to such a state.

We clean the kettle with household chemicals

All chemicals can be divided into two types:

Abrasive. Sold in powder form. Most often used for cleaning stainless utensils. They clean well and are inexpensive, easy to use. It is enough to pour a small amount on a damp sponge and rub the kettle with rotational movements until it is completely clean. Rinse afterwards under running water.
gel means. Used for gentle cleaning. The composition may contain acid, which contributes to rapid cleansing. All safety measures must be taken before use.

Important! Before using any product, read the instructions on the package.

How to remove fat from a kettle without chemicals

For those who are against the use of chemicals, there are folk methods for dealing with pollution. But a kettle with a burnt bottom will have to be given more time.

Note! To clean electric kettles from fat, it is better to use special household chemicals so as not to render it unusable or spoil the appearance by improper use of folk remedies.

Vinegar with soda

A mixture of soda and vinegar is quite aggressive, so it is often used by housewives to clean heavy dirt, including.

Place the kettle in a large saucepan and add enough water to completely cover the bowl.
Add vinegar and baking soda to the pan in a ratio of 1:1. With small pollution, 3 tbsp. l. each component.
As soon as the water boils, detect 12-15 minutes.
Then turn off the heat and let the water cool down a bit.

It will be enough just to wipe the kettle with a sponge under running water.

Soda

If you need to clean the kettle of fat not only outside, but also inside, you can use an available tool - food or.

Before using the powder, the kettle needs to be slightly heated. Then we apply soda to a damp sponge and rub the entire vessel with translational movements.

It is better to start from the bottom, where all the soot and soot have gathered, and only then rub the rest of the surface. To make a stainless steel kettle shine like new, you will have to make a lot more effort than with a regular dishwashing.

It remains only to rinse the utensils with plain water. You can use the same method.

You can also make a slurry of soda and peroxide in a 2:1 ratio. Rub the teapot well with the resulting mixture and leave for 12-15 minutes. It remains only to wash and use it further.

Important! It is better not to wash enameled teapots in this way. Baking soda is a fine abrasive that can damage enamel.

For utensils with a delicate coating, there is a more gentle method:

Pour water into a large saucepan and add soda in a ratio of 1 tbsp. l. per liter of water.
Place the kettle in a saucepan and let the water boil.
Boil for half an hour.
After the time has elapsed, turn off the fire and let the water cool.

It remains only to wash the kettle. For heavier soiling, a little detergent can be added to the water.

Toothpaste

The toothpaste method is not potent. It can only help with weak spots of fat on the outside of the kettle. But since the paste is always on hand, it can be used for stains or in emergencies.

Apply toothpaste to the brush and rub the teapot thoroughly, paying special attention to the handle, spout and bottom, because all the soot has collected there. After rubbing all the places well, you can wash off the paste with warm water, and then rinse with cold. In conclusion, to add shine, wipe the teapot with a cloth.

Important! Do not use whitening paste for washing dishes with chrome and enamel coatings. The composition of such a paste includes a fine abrasive.

Lemon acid

The safest method for cleaning cookware.

To get rid of stains, dilute citric acid in a large pot of water and boil kitchen utensils in it. If the final result is not pleasing to the eye, then the procedure can be repeated. You can also use lemon juice instead of acid.

Non-standard cleaning methods

Experienced housewives still use such methods, and they perfectly help to clean the kettle of old fat from the outside.

Laundry soap and PVA glue

To prepare a miraculous solution, you need to finely chop or grate the soap and add a couple of tablespoons of glue. All this pour 4 liters of warm water. To obtain a larger volume of solution, the amount of all components is increased in equal proportions.

In this brine, boil all the dishes for 30 minutes and then rinse well with water.

Cucumber pickle

Who would have thought, but cucumber pickle can wash dishes. To do this, all the dishes must be loaded into the boiled water and poured with brine. Boil for about half an hour and rinse with water. Remaining salt can be washed off with a sponge and detergent. A simple and effective way.

mustard powder

This method of cleaning was used decades ago. Apply mustard to a heated dish and rub well with a damp sponge. Wait 20 minutes and rinse in water.

What is the best way to clean a stainless steel kettle

Dishes made of such steel are very popular at the present time. But even the slightest pollution is immediately visible on it. It is better to clean a stainless steel metal kettle outside and inside by boiling in soda or soapy water.

How to get rid of grease and other contaminants on an enameled teapot

The enamel coating is very sensitive to mechanical stress. It is better to give preference to gentle folk methods or special chemistry.

Important! To prevent the enamel from cracking, do not allow sudden changes in temperature.

Cleaning an aluminum kettle

It is strictly forbidden to scratch or subject aluminum teapots to other mechanical influences. Such methods quickly lead to the unsuitability of utensils for cooking and the appearance of corrosion on the dishes. using folk remedies: vinegar, ammonia and hydrogen peroxide.

So that the kettle does not have to be washed from strong contamination, simply wash it regularly with a regular detergent and wipe it with a cloth.

For even more interesting methods on how to wash a kettle of fat, see the video:

Larisa , May 8, 2018 .