A DIY dressing table is a great gift for your sweetheart. Dressing table for the bedroom with your own hands Dressing table for the bedroom with your own hands

If in practical terms you are not a deliberately meaningless person, like a people's deputy or the chairman of the zits-chairman of the fund for protecting hamsters from gophers, you must certainly imagine the structure of some of the objects around you. And if you also consider yourself a real man, you can make these items or at least repair them. You should not immediately grab onto the adjustment of the hadron collider - it will not be useful on the farm. But it makes sense to remember that there are much more women's holidays in the year than it seems reasonable. An alternative to buying a gift is to make something yourself, which is not a problem for a person with a full set of working limbs. Suppose you decide to make a dressing table with your own hands.

The proposed model of the dressing table do-it-yourself

Required tool

Here is a list designed for repeated feat. So:

Electric drill with a chuck up to a minimum of 10 mm. Ideally, a good screwdriver, it is more convenient.
Electric jigsaw with chipboard saws. If you are afraid of a jigsaw, prepare money for ordering figured cuts.
Roulette.
Building angle (something on which you can draw a perpendicular, with millimeter marks). The length of the measuring ruler is sufficient at 300 mm.
Drills for wood, with a diameter of 8 mm and 5 mm. It's easier to buy a set.
Combination screwdriver with bit set. The kit must include a hexagon bit for confirmations (ask at the construction market, they know).
Iron.
Pencil, hammer, knife, dry cloth, fine sandpaper.

Parts ordering

You will not be able to cut a chipboard sheet at home in such a way as to maintain the desired geometry and cleanliness of the cut. Cutting will have to be ordered. Most building markets selling laminated chipboard have such a service.

Self-made curly saws (radii, etc.) will have to be sealed with a soft U-shaped edging to close the inevitable chips on the laminate. Kant and other fittings should be bought in specialized furniture fittings stores that are in every city. Sellers will advise you in case of difficulties.

Note: To communicate with sellers, learn the materiel - they do not understand the words “fityulinka”, “thingy” and “insert into such a hole”.

The choice of color and texture of laminated chipboard is up to you, the only technical detail is the detailing for a thickness of 16 mm. Also attention to the edge - melamine, 0.5 mm thick.

We need chipboard parts (all dimensions in millimeters):

1000x450 - countertop
630x300 - sidewall
614x350 - 2 pcs., cabinet sides
350x350 - tsarga
600x110 - shelf under the mirror
80x100 - 2 pieces, sidewalls for the shelf
1050x600 - rear panel for the mirror
350x350 - cabinet bottom
318x80 - 2 pieces, slats in the cabinet
149x343 - 4 pcs., drawer fronts
100x300 - 8 pcs., side of boxes
100x259 - 8 pcs., front and rear drawers

Fiberboard details (3.2 mm thick):

625x345 - back wall of the pedestal
297x289 - 4 pcs., the bottom of the boxes

Note: Fiberboard parts can be fastened with self-tapping screws (3x16) or nailed with ordinary nails (1.5x25). The main thing is to check a clear geometry, a right angle in the resulting parallelepiped.

Fittings and fasteners

Confirmations 5x70 (sold in hundreds, come in handy).
Self-tapping screws 4x16 - "-.
Self-tapping screws 4x25 - "-.
Roller guides for boxes x300, 4 sets.
Drawer handles 4 pcs.
Edge and melamine edging with adhesive backing (with a margin for the first time).
Metal corners, furniture 3 pcs.
Glue or mechanical fasteners for the mirror.
Additional screws for handles 4x40, 8 pcs.

Assembly preparation

Before picking up the right details, practice on scraps. Theoretically, knowing how to make a dressing table, and putting the theory into practice - there is a difference.

Table top shape

Make curly cuts according to the drawings with a jigsaw and snap the “curved” sides of the parts with a piping. The end of the part under the edging is first primed with glue (the usual "Moment") until dry, then another layer of glue is applied and the edging is put on.

Sidewall (right)

It is better to draw the radius of the panel for the mirror along the mirror itself, giving the necessary tolerance. Mirror dimensions 850x500 mm.

Rear panel for mirror

We glue the melamine edge with a regular iron. To do this, we apply it to the desired end with the adhesive side down, run it from above with a hot (3/4 power) iron several times and iron it with a dry cloth. We cut off the excess with a blunt (so as not to damage the laminate) knife and clean the edges with sandpaper.

The marking of the guides for drawers on the sidewalls of the cabinet is made from the top of the sidewall according to the following formula: Drawer number (counting from the top) * front height (here 149 mm + edge = 151 mm) - 25 mm.

Thus, the center of the mounting holes of the upper rail should be 1*151-25=126 mm below the top edge of the cabinet, the second 2*151-25=277 mm and so on. The lower skids along the same axes are marked from the bottom of the sidewall at a distance of 30 mm.

We fix the guides with 4x16 self-tapping screws indented from the front side of the sidewall by 5 mm (for a snug fit of the facades).

We pre-drill the parts fastened with confirmations. The figure shows that at the end of the part there is a hole with a diameter of 5 mm and a depth of 60 mm, and in the plane the diameter of the through hole should be 8 mm.

Holes for confirmations

Cabinet assembly

The sides of the boxes are drilled into the plane, the front and rear walls - into the end. We assemble the “boxes”, nail the hardboard (hardboard), fasten the guides with 4x16 screws from below, through the hardboard. It should be remembered that the guides are "left" and "right". The front of the drawer slide (the one without the roller) is flush with the front edge.

We tighten the sidewalls of the pedestal with confirmations with slats and a bottom. The back wall is fiberboard. Through holes with a diameter of 5 mm on the slats are needed to attach the cabinet to the tabletop from below with 4x25 self-tapping screws.

Cabinet assembly

The fronts are also attached to the front wall of the drawers and are additionally fixed with screws for 4x40 handles after precise alignment.

final assembly

If you coped with the pedestal, keeping your fingers and mind intact - smoke and proceed to the remaining elementary. The figures show the order in which the sidewall-tabletop-side side assembly should be mounted. Carefully, slowly, with the same confirmations and furniture corners. Corners are needed so that fasteners do not stick out of the tabletop, but you can also buy plugs in the color for confirmations.

Assembling the sidewall-table top-side side assembly

The module "panel with a mirror + shelf with supports" is attached from below, through the table top.

final assembly

Now you know how to make a dressing table with your own hands - it remains only to clean up the mess in the apartment and get ready to receive kisses of thanks from your beloved.

A dressing table is a very useful item that will be the perfect addition to the bedroom. However, if at the moment there is no way to purchase this piece of furniture, then you can try to make it yourself. How to make a dressing table with your own hands? This is quite a feasible task, which is simplified by using the instructions below. If you consider yourself a beginner, choose the simplest scheme possible and get to work. If you have the knowledge and experience, then it will be more interesting to find and implement a complex ladies' table with numerous drawers and shelves.

Before you equip the dressing table with your own hands, you should prepare the following materials:

chipboard (a laminated version of the same material is also suitable). These options are best suited for self-manufacturing furniture, as they are lightweight and quite affordable. In addition, they can be processed without significant effort. Standard - plates with a thickness of 16 mm. As an option, you can take MDF made according to GOST, which is characterized by a high degree of efficiency and a long service life. If this material is more suitable for you, please note that it has a higher price;
wood. If you have some experience in carpentry, then you can choose this material to create a dressing table for a girl. Choose those species that are easiest to process, such as pine, which has a relatively low cost. Do not forget that working with wood will require special equipment, at least a device for milling work;
plywood sheet, which is required for the manufacture of the bottom of the boxes, as well as the back wall of the table.

Do not forget about tools and special devices. Their list includes:

fasteners (confirmates, self-tapping screws);
roller guides, which will be needed for the equipment of boxes. If you do not want to make boxes and plan to get by with shelves, then this element will not be required at all;
furniture corners made of metal;
furniture fittings;
edge for finishing work;
a screwdriver (a drill with a set of nozzles is also suitable instead);
electric jigsaw (it is useful for cutting chipboard plates);
tape measure for accurate measurements;
building corner;
grainy paper;
screwdriver for working with confirmations.

In addition to the items already listed, additional items may be required, such as a mirror, if you are planning to make a stylish dressing table with a mirror to put it in the bedroom. Decorative accessories made of wood will also not be superfluous. They will give the finished product a stylish and modern look, the women's room will change dramatically if you put a beautiful table made by yourself in it. It remains to be hoped that you will be able to pick up the necessary elements.

In order to cope with the manufacture of a dressing table, heed a few valuable tips. Firstly, the key to quality work is the thoroughness of its implementation. Even if you have chosen the most concise model from the photo, try to grind every detail with special care so that in the future there will be no problems with fitting.

1 2 3 4

Secondly, use the diagrams, observing all the features that the drawing contains.

If you decide to include any additional element in the structure or change the dimensions, then you will have to make additional efforts: buy accessories, replace one material with another, and so on.

This greatly complicates the work. There is only hope that the novice master will be lucky and he will cope with the task.

How to arrange a dressing table?

1 2 3 4

Assembly instructions for a standard product will help you create a presentable and stylish piece of furniture:

A determinant with the dimensions that the finished product will have (such a parameter as height is especially important), as well as with the place where the furniture will be located. The standard is a model with a height of 80 cm. However, the dimensions of the dressing tables may vary depending on the area of \u200b\u200bthe room and other circumstances.
Make a project or choose a finished one by viewing the photo on our website. Transfer each element to special paper for drawings.
Attach the prepared templates to the chipboard, cut out the details on them, using an electric jigsaw for this purpose. If the design does not include too complex details, then even a novice master who does not have much experience can cope with the work.
Finish the ends of the blanks with sandpaper. If chips are formed during this procedure, then it is better to mask them with a special tape. Prime the end elements twice with a primer to make the edge stronger. To do this, it is recommended to use high-quality glue.
Put a piping on the countertops, glue the ends with a melamine edge. Fix it well on the edge, and then process it with a heated iron.
Assemble the individual elements that form the frame of the furniture. Fasten the tabletop, racks, legs and back wall together. To do this, make holes at the marked points, and then fix the elements using confirmations. Check the corners with a building corner: if everything is done correctly and correctly, tighten the fasteners with a key.
Assemble the boxes by drilling individual elements and fastening them with confirmations. Carefully check that the standard is met, and then tighten the fasteners with a screwdriver. Secure the plywood bottom with small nails. Attach the guides and counterparts in the appropriate places, and then insert the box.
On the front, make holes for the handles and fix the fittings.
If the design involves the presence of a pedestal that closes on the door, you will have to install overhead hinges. To fix them, make holes 12.5 mm deep, attach the hinges using screws. Screw the hardware to the door with self-tapping screws.

If you want to create a do-it-yourself dressing table with lighting that will decorate the interior, purchase LED strips consisting of small lamps. Lighting is a complex procedure, try to work with extreme care when you create your own dressing table for a toilet. Alternatively, you can choose small light bulbs if you have some electrical and installation skills. Otherwise, hope remains only for a specialist, whose help should be used in order to avoid accidents.

Many real owners are wondering if it is possible to design and make medium-level home furniture on their own. Of course, it will not be easy for a beginner to make cabinets, tables or bedside tables from a real one. In addition to special skills, special machines are needed here and a lot of space in a garage or workshop, which not everyone can afford in an urban environment. But the question of how to make a dressing table with your own hands is much easier to solve if you collect it not from wood, but from more affordable and easy-to-use chipboard. Accessories are easily bought at a building supermarket, and even cutting sheets can be ordered from the seller if you purchase them at specialized enterprises. You will only have to design furniture, drill, cut small pieces and assemble it.

How to make a dressing table with your own hands?

It is very convenient to model a future product using the 3ds Max program. If you are not very familiar with programming, then you can make simple sketches on paper.

Chipboard we take colors, but if you are not satisfied with dark furniture, buy material for yourself in any other shade. We advise you to immediately stick a PVC edge on the sheets.

We use a pre-prepared template to mark the ends of the parts.

We mark the reciprocal holes.

The template allows you to mark the center of the future hole without a tape measure. We have blanks 100 mm wide, and 8 mm should be retreated from the edge.

Similarly, we mark the rest of the details.

With a hammer and a sharp object, we punch in the center of the hole.

It is most convenient and accurate to drill a sheet on a vertical machine, but in its absence, a conventional drill will do.

The holes are ready, the first part of the task of making a dressing table with your own hands is completed.

According to the dimensions, we proceed to assemble the boxes. The general view of the drawing shows that we will have 6 small drawers and one large roll-out drawer.

In the second part of the drawing, the racks are not shown in order to make it more convenient to mark the length of all blanks. The dimensions of 6 small boxes are 310x260, but they differ in height. The drawer has dimensions 410x260x60. In accordance with the drawing, we purchase guides.

We collect boxes.

We mark the places where the guides will be attached to the racks. From below, you can immediately drill a hole for the thrust bearings.

We install adjustable legs on the bottom of the cabinet.

The curbstone is ready and you see that in the matter of how to make a dressing table with our own hands, we are already moving towards the final.

We put the boxes in place, check the operation of the mechanism.

The boxes are installed.

The handles can be screwed on or made into a figured gash for the fingers on the facade.

We cut out the plate under the mirror, glue the edge and mark the place for its fastening.

We apply a layer of quick-drying silicone or other high-quality glue.

We install a chic mirror with facet, carefully seating it on silicone.

We assemble the cabinet, fasten all the structural elements together. At the end, we attach a lamp above the mirror.

The dressing table, which we assembled with our own hands, is completely ready.

Like it or not, it is better to store all care products, cosmetics and perfume in one place, and not randomly distribute them on the shelves in the bathroom, hallway, bedroom and dressing room. A do-it-yourself dressing table is what you need if you want to think through everything to the smallest detail in the design for convenience. It's not that hard to make it. In fact, in various variations, it is a small single-pedestal table with drawers and a mirror. The mirror can be stationary or movable, mounted on a hinged top cover from the inside.

Photos and drawings of a dressing table with your own hands

Not so long ago I was sorting through photos from last year's furniture exhibitions. And in the folder for 2014 I found one very good model.

I really liked the console design. It's ingenious - to build a console on a similar principle, for example, to a bedside table and get an excellent dressing table with your own hands!

How to make a bedside table with my own hands, I already painted. Such a console can also be attached to any chest of drawers (for example, to) - and a dressing table with a mirror will look quite stylish and interesting.

You can, of course, not try to make the already existing furniture in the bedroom multifunctional, but make a dressing table with your own hands as an independent and separate piece of furniture. The drawing and assembly diagram with the overall dimensions of the dressing table with your own hands will look like this.

Dimensions can be changed - make a dressing table with a mirror larger and wider, the way you want. We will describe step by step how to make such a model with your own hands.

How to make a dressing table with your own hands?

Let's not waste time thinking about what the dressing table mirror will be like. Since there are really a lot of options:

Attach it to a substrate or insert it into a frame.
Make it square, round or fancy.
Decorate with sandblast and bevel.
Complete with stylish lamps or LED strip.
Buy separately and hang on the wall. In a strict wooden frame or framed with openwork forging.
Design a movable box for it, which will allow you to change the angle of inclination at the mirror.

Which option to choose is up to you.

Let's focus on the basic design of the dressing table for now. In fact, it will be necessary to assemble the cabinet frame, drawers for it and a console superstructure.

Drilling for assembly on confirmations will not have to be so much. If the parts are sawn to size and rolled up on the visible sides, the whole process will take no more than a day.

DIY dressing table, calculation of parts according to drawings

You can make a dressing table for a girl or a completely adult lady from any material - wood, plywood, laminated chipboard. The main thing is to decide on the model from the photo. Then draw everything to scale to determine the size and not "lose" the details. And then, given the thickness of the material, calculate the dimensions of all blanks.

It is most convenient to do this in Excel, entering data into a tabular form. For our dressing table model, the calculation of details, taking into account the thickness of the chipboard 16 mm and indicating the sides for gluing the edge, will be as follows.

The chipboard consumption is small relative to the whole sheet, it can be completely combined with the manufacture of other pieces of bedroom furniture. Or lay, for example, in cutting a few simple shelves to attach to the wall on beautiful holders - they will never be superfluous in the house.

You can also drive the base under the mirror of the desired size into consumption - if you decide to choose the option when it is simply attached to the chipboard, as in the photo.

Dressing table details drilling and assembly according to drawings

First, all the details of the future table need to be drilled. Before that, it is better to lay out the paired parts so as not to confuse the sides from which they will be drilled relative to the leading edge. And also do not forget that the sidewalls of the drawers are drilled mirror-image relative to each other.

If all the holes have been drilled correctly, the furniture will assemble like a designer. How to install drawers in a cabinet, with what guides, you can peep here, in the assembly of a tall chest of drawers. All actions will be the same.

To facilitate the assembly of the dressing table with my own hands, I will give an assembly drawing.

What you need to make a dressing table with your own hands

From the tool, if you order cutting parts and edging on the side, you only need the usual tool of the master - a drill for drilling, a screwdriver and a screwdriver for assembly, an awl, a tape measure, a square and other small improvised material that is in any home.

You will also need to purchase accessories and consumables. I have included everything I need in the spreadsheet.

Of the additional costs - the purchase of a mirror of the desired size and design.

It doesn't take that much money if you decide to make your own dressing table. Much less than picking up something from finished furniture.

How to make a dressing table with your own hands as a necessary piece of furniture and decoration, it is proposed to familiarize yourself with this article.

Despite the fact that the dressing table seems to be an optional item, in practice it is necessary. Some models turn into a shelf and are placed under the mirror not only in the bedroom, but also in the hallway or bathroom.

If desired and possible, a dressing table is quite simple to make with your own hands.

Many girls install a dressing table in their bedroom. Here you can not only store everything you need, but also use it as a wonderful decorative element. Such models are made in a variety of styles so that the owner can choose or make a product that best suits the general one.

The most popular dressing tables are those with a mirror. In the interior of the bedroom, the most common models are made in vintage, modern or classic style, which look very elegant.

For those who pay more attention to visual design, classic and vintage are suitable. These models have expressive, rather bright decorative features, which can be seen in the photo.

A simpler and more practical style is modern (see). Contrasting elements, even corners and small parts are attractive.

They may look like modern variants of a dressing table. For manufacturing, chipboard is used, into which plastic parts are inserted.

The criteria for choosing dressing tables are:

Each model is distinguished by its features, detailing and practicality, so you should pay attention to this. But the price of a finished comfortable table can be much higher than it was planned to spend on it, so many are interested in how to make a dressing table with their own hands.

Tip: Before you start creating an author's model, you should familiarize yourself with the nuances of how factory products are selected.

The design should be quite comfortable to use, but not take up a lot of space. The product is made compact and maximally capacious. This can be solved by installing additional sectors placed on both sides, in front of the mirror and under the table top.
With a large room, you can also install a three-dimensional structure with a sufficiently large mirror, which will be convenient and at the same time beautiful.
There is an option to mount the product with a suspended table structure. This model takes up less space and is a cheaper option.
After choosing a model, you can start making a dressing table.

Preparatory work

Before starting the assembly of the structure, it is necessary to develop its drawing, where all the dimensions necessary for manufacturing will be indicated. When a dressing table is made by hand, drawings and diagrams help in the work, which will help to avoid unforeseen errors and miscalculations.

Such documentation is developed independently. In this case, an individual furniture model is invented or a ready-made analogue is taken as a basis.

You can use your dimensions and change the entire design to suit your requirements. The dressing table is equipped with one or two bedside tables (see).

The necessary small items are removed in the drawers, and cosmetic accessories, a first-aid kit, and books are placed on the shelves. But you can redistribute storage space according to your own taste.

To carry out the work you will need tools:

Electric drill with a set of drills that are designed for woodworking.
Screwdriver with a set of necessary bits.
Electric jigsaw or hacksaw with small teeth.
Set with different bits of screwdrivers.
Hex keys.

It is necessary to prepare measuring tools:

Measuring tape.
Measuring line.
Metal or wooden square.
Building level.

Tip: You can not neglect the control of the installation of fasteners, otherwise the furniture may be deformed.

For marking you will need a regular pencil.

What materials are needed to make a table

During the preparatory work, you should decide on the location of the mirror. It can be part of a table or separately fixed to the wall. The easiest way is to use a ready-made mirror, which will allow you to avoid time-consuming and rather complicated work when installing it.

It is necessary to decide how the sections of the countertop will be decorated. Amateur craftsmen simply sand or putty them, and then cover them with paint. But these methods are not reliable enough.

Tip: For decoration, you should use a special edging furniture or end tape. To install it, you will need an iron or a low power building hair dryer.

For the manufacture of countertops of an unusual shape, it is easier to contact a specialized carpentry workshop.

When making a model, you must:

Make a life-size pattern of the element from paper or cardboard.
Select accessories:

pens;
furniture hinges;
all kinds of awnings;
drawer guides. They can be roller or ball designs. The former are low cost. Ball guides are more reliable and easy to use.

To fix the elements, self-tapping screws, confirmations or eurobolts are used.

Method: For the reliability and durability of the nodes, all joints should be additionally glued with ordinary PVA glue.

For this method of fixing, you will need to use clamps to tighten the parts until they are completely dry.
Special plastic plugs covering the bolt heads improve the appearance of the product.
The table can be made from:

chipboard;
enough thick plywood, at least 16 millimeters thick;
solid carpentry, but in this case the furniture will have a more massive look.

How to assemble a dressing table

The dressing table is made in the following sequence:

The table is formed. First, you should paste over the surface of the sheet according to the applied markings with paper construction tape.
A cut is formed on top of it. This order will prevent the formation of chips, chips and excess chips.
The front edge of the cover is processed. It should be sanded with coarse-grained sanding paper rough, and then re-primed with glue. In this case, you can use the glue "Moment".
The primer must dry completely.
The surface is again smeared with glue.
The end edge is installed.
The tape is glued with an iron. In this case, the temperature of the iron should be set to "cotton".

Excess edges are cut off with a clerical knife.
Sections are cleaned.
Similarly, a rack for mounting a mirror is made out.
Sidewalls of cabinets cut in advance according to the dimensions are marked for installation of guides for drawers.

The boxes are laid out like this:

is taken, starting from the top, the serial number of the box;
multiplied by the height of the wall in centimeters;
the height of the edge for finishing is added, which is equal to 25 millimeters.

With a box height of approximately 140 centimeters, with an edge height of four millimeters, the calculation will look like this:

first box: 1 x 140 + 4 - 25 = 119 millimeters;
second box: 2 x 140 + 4 - 25 = 259 millimeters.

In this case, the guide or its center for the first drawer is fixed at a distance of 119 millimeters from the upper cut of the sidewall, and 259 millimeters for the second.

Dressing table drawers are assembled.
In the side blanks for the walls, holes are drilled in the plane, in the front and rear elements the same sockets are formed at the ends.
For fixing, wooden dowel or eurobolts are used.
Gather around the perimeter of the wall.
The bottom is attached to them, which can be made from a small thickness of plywood or hardboard.
From the outside, guides are fastened with self-tapping screws. When using roller structures, each side requires the installation of its own guides.

The final processing of the dressing table is in progress.

For this:

Cabinets are mounted.
To the side elements are connected transverse upper screeds or slats.
The bottom is fixed.
Before installing the screed, holes are formed in them to fix the table top.
Installed last:

table cover;
on drawer fronts;
accessories;
doors for storage of small items.

For dressing tables made of laminated board, this can be completed.

When using chipboard or plywood, the product needs a final finish.

For this:

All cuts and cuts are carefully sanded and polished.
Surfaces are covered with paint or stain.

Tip: When using paint, the table will look like it was assembled from precious wood, and stain can make the structure of the tree more pronounced.

Lacquer surface treatment helps to acquire furniture with a glossy sheen. Otherwise, the table will be matte.

How to make a dressing table with your own hands with drawings developed independently or by third parties, the video in this article will tell you.