How to assemble a kitchen corner diagram. Do-it-yourself kitchen corner: how to make, drawings, photos

You don't have to be a professional to make a kitchen corner with your own hands. Anyone can do the job, armed with patience and the necessary tools.

Similar articles:

Deciding on the design and construction

Before making the corner yourself, you need to decide on its size. This will help you make the most of your space. A U-shaped headset is appropriate in a spacious room. It is recommended to install a corner of separate modules in studio apartments. In a cramped kitchen, it is better to install only an L-shaped structure.

Before making a kitchen corner with your own hands, you need to purchase materials for the frame and cladding, given that the headset will be intensively used. Its appearance should not be discordant with the design of the room. The upholstery is selected from materials that can be easily cleaned from dirt.

When developing the design of furniture, it is advisable to make a sketch that will help you imagine how it will look surrounded by other interior items. It is better for an inexperienced craftsman to make kitchen corners according to ready-made drawings.

Modular corners

Furniture of this kind is of interest to those who like to experiment with its arrangement in the room. The headset items do not bond to each other. More often, a modular corner consists of 2-3 sofas. Sometimes they are supplemented with corner seats, which are a chair with 3 legs or on a 3-corner base.

The modular set belongs to the category of straight kitchen corners, the main drawback of which is the discomfort experienced by a person sitting in the corner.

With a berth

You can build corners in the kitchen that will sometimes be used as beds. The classic design of the headset is complemented by a daybed. It serves as a seat during the day. If necessary, it is moved to the rest of the elements. It is important not to be mistaken with the size of the couch. Its height should be the same as that of sofas. It is better to put it on furniture wheels, the size of which must be taken into account when developing the drawing. A kitchen corner with a berth can be modular.

With storage boxes

The best option for a kitchen set would be a corner with sofas equipped with storage boxes. They should be spacious and easy to open. It should be borne in mind that drawers may not allow people sitting on the couch to sit comfortably. The boxes standing on the floor should not interfere with the legs, therefore, it is recommended to make their front walls sloped or deepened.

Often, making a kitchen corner with their own hands, craftsmen place boxes not only under the seats, but also behind the backs of sofas. In this case, the area occupied by the headset increases. Sometimes, instead of storage boxes, the frame is equipped with drawers. Assembling this type of furniture is more complicated than assembling sofas with cover seats.

For a small kitchen

Making a corner for the kitchen with your own hands, intended for use in a confined space, you have to think about saving space. The dimensions of the room allow you to build a straight corner with small sofas.

Furniture is made in such a way that things, utensils, etc. can be stored in it. The structure is limited in width and length so that it does not clutter up the room. It is complemented by light chairs or stools. For a small kitchen, you can make a modular set.

Required materials and tools

To work on making a kitchen corner from wood, you will need the following tools:

• circular saw, hacksaw or jigsaw;
• drill;
• screwdriver;
• square;
• roulette;
• pencil and chalk;
• mallet;
• stapler;
• surface grinding tools;
• scissors;
• construction knife.

Fasteners will be:

1. self-tapping screws;
2. confirms;
3. furniture bolts with washers and nuts;
4. dowels.

You need to purchase materials such as:

• foam rubber 80 mm thick for seats;
• thin polyurethane foam for finishing the backs of sofas;
• leatherette, jacquard fabric, etc. for upholstery;
• masking fabric;
• piano or furniture hinges;
• plywood or chipboard;
• bars 40x40 mm;
• staples;
• ABS or PVC edging for finishing the ends;
• steel corners with holes.

For a kitchen corner made of solid pine, you need to buy boards of 100x40 mm, plywood. The wood is planed with an electric or hand plane. The final sanding is done with emery paper or a tape machine. Only smooth, dried wood without signs of decay and cracks is suitable for work.

Drawings and diagrams

A detailed drawing of the kitchen corner will avoid waste of materials and design errors. In addition to the general diagram of the product, the drawing must indicate the exact dimensions of the structural elements, hole diameters and the section of the fastener. The novice master is recommended not to deviate from the implementation of the technical conditions proposed in the drawing. It should be borne in mind that replacing materials will affect the performance of the headset.

Taking the drawings for the manufacture of a kitchen corner as a basis, an experienced carpenter can make changes to its design, but you should not experiment with the height of the furniture. You can equip sofas with additional storage space or adjust the length of the seats. With an increase in the size of the headset, it is necessary to strengthen the frame parts. Reducing the length does not affect the strength of the kitchen corner structure.

Assembly

Accurate adherence to the step-by-step instructions for assembling furniture will help a novice master to complete the work without unnecessary material and time expenditures. The process is divided into several stages, including:

• frame construction;
• cutting and sewing covers;
• backrest and seat upholstery;
• assembly of the headset.

Before you make a corner in the kitchen with your own hands, you need to free the room from furniture and foreign objects.

Installation and fastening of the frame

The frame of the kitchen unit can be built from oriented strand board, chipboard or plywood. When assembled, wood panels form a spacious and sturdy box. For the manufacture of the frame, you must choose laminated chipboard. The ends of the elements prepared for assembly must be sealed with an edge band. This will protect the chipboard from moisture, and the room from the release of harmful fumes from the chipboard.

Often, only the sidewalls of the frame are made of wood-based panels. These parts of the structure are interconnected by bars. For reliable tightening of sheets with each other and with crossbars, through joints should be used. Steel corners are best used when making headsets from boards. In these cases, its elements are assembled using bolts.

Before screwing the fasteners into OSB, chipboard and plywood, it is necessary to drill holes slightly smaller than the section of the confirmations or self-tapping screws. Dowels will add additional strength to the structure. It is better to join parts after processing holes, fasteners, spikes and contacting surfaces with glue.

Installation of fronts and seat bases

The bars between the sides of the kitchen corner can be sheathed with plywood or fiberboard. Facade sheets are attached to the frame with self-tapping screws. For the base of the seat, at least 10 mm plywood and 16 mm chipboard are suitable. The lid is connected to the body with piano or furniture hinges. The non-removable seat can be fixed with confirmations and self-tapping screws.

Backrest and seat upholstery

It is sometimes more expedient to upholster the elements of the headset before assembling them. The inner walls of the boxes are often covered with thin fabrics and the backs of the seats and backs are covered. The masking material is nailed down with furniture nails or staples after the upholstery.

Filler for a soft kitchen corner

Those who make a soft corner for the kitchen with their own hands use foam rubber as a filler. You can put a 20 mm thick sheet on the back. It is better to cover the base for the seat with foam rubber with a thickness of 40 to 80 mm. Polyurethane foam with a density of at least 30 kg / m³ is distinguished by its durability and elasticity. Softer foam rubber will crumple after a short time.

The filler is fixed on the base with glue, which is applied to the contact surface of the wooden plate in a zigzag or staggered manner. At the edges of the base, the polyurethane foam can be fixed with a stapler.

Sometimes the seats and backs of the corner are a kind of mattresses and pillows. The covers can be filled with crushed foam rubber, siliconized fiber, etc.

Which fabric to choose

Most often, leatherette is used as an upholstery fabric for a kitchen corner. Impurities are easily removed from it. The material imitating expensive leather is cheap, durable and does not fade for a long time. You can choose microfiber for upholstery. It is not inferior in its basic characteristics to leatherette, but, unlike it, it “breathes”. The disadvantage of microfiber is its short lifespan.

Those who choose flock should be aware that an inexpensive material is not practical, since its pile accumulates dust well. Beautiful, durable jacquard upholstery is expensive. Teflon fabric is also not cheap, although its properties are superior to other types of upholstery.

Natural fabric is the least suitable for decorating sofas: it gets dirty faster. It is more difficult to clean it. The material wears out quickly.

Cutting fabrics and gathering

Before you make your own corner upholstery, you need to accurately determine the size of the seats. When cutting out the fabric, you need to take into account the thickness of not only the base, but also the lining. When designing a sweep, you need to add 1.5-2 cm to the dimensions of the material. The side parts of the upholstery are sewn together. You can make a coating by combining fragments of materials of different colors and composition.

Upholstery material

A seat or back plate is placed on the upholstery fabric lying on a flat surface (face down). The material is pulled and fastened to the base at 2 points, centered on the long sides. Then, avoiding distortions, fix it with staples or furniture nails with a step of no more than 3 cm.

Injection

The most difficult task may seem to be making a corner of a kitchen set with an arched back.

What do you do with old furniture?

Nice upholstered furniture decorates the kitchen and makes it much more comfortable. If the area of ​​the room allows, a kitchen corner can be placed in the dining area. The advantages of such furniture are that it significantly saves space. And with the right set with a table and stools, your kitchen will become a favorite place for gatherings over evening tea or coffee with family or friends.

The kitchen corner should not only be stable, but also comfortable.

Making a corner at home is not too difficult, even if you are not a craftsman. Almost all the necessary materials and tools can be found in any home.

The general rule for the acquisition (selection) of material is its quality.

Each master starts making furniture by taking measurements of the place where it will be installed. The assembly of a kitchen corner involves the obligatory accurate calculation of parts and the preparation of a drawing.

The kitchen corner is made with a base on beams with lamellas or thick plywood.

Materials are selected based on preferences. It can be a tree or its derivatives:

• Chipboard.

Nice upholstered furniture decorates the kitchen and makes it much more comfortable.

The general rule for the acquisition (selection) of material is its quality. The reliability and safety of the future design depends on this. In the kitchen, there should be no fumes from the resins that are part of the chipboard, therefore, a coating is required or neutral chipboard or wood is chosen. They must be carefully processed and accurately cut to the design dimensions.

Non-marking upholstery materials are used for kitchen furniture.

The kitchen corner is usually made soft, so the elements shown in the table are needed for upholstery.

The advantages of such furniture are that it significantly saves space.

The fabric is trimmed with a small margin. The filler is chosen of medium density, its width is about 3-4 cm.

Making furniture such as a kitchenette requires careful and precise calculations.

If the master is experienced enough, then you can pick up materials that are difficult to process, for example, not flock, but high-quality artificial or natural leather.

The kitchen corner can be made in three parts.

To assemble the kitchen corners, choose the main material for the support structure with a width of at least 20 mm, otherwise, when connected with bolts or screws, the material will delaminate and crumble.

Making a corner at home is not too difficult, even if you are not a craftsman.

When working with chipboard, you will also need a matching edge band. It is cut after the panels have been adjusted to size.

At home, some make more original corners - with two or three half-chairs, each of which has its own full-fledged supporting structure.

You can also make a modular corner.

An important point: kitchen corners are not recommended with a closed "leg" part - it will be inconvenient to sit, especially if the table has straight supports. The lower part must be made through so that the legs can move freely.

If you can't do without a solid support, then make it better beveled - the lower part will turn out at an angle and will not greatly interfere with the legs.

The assembly of a kitchen corner involves the obligatory accurate calculation of parts and the preparation of a drawing.

The standard length for a kitchenette is about one and a half meters. Given that most dining areas in homes do not have a spacious area, this option is the most popular. The width varies from 50 cm.

What tools are needed?

To assemble furniture, you need such available tools as:

• screwdriver;
• hacksaw;
• stapler with staples;
• jigsaw;
• pencil;
• ruler or vernier caliper;
• roulette.

In the kitchen, there should be no fumes from the resins that are part of the chipboard, therefore, a coating is required or neutral chipboard or wood is chosen.

Wooden parts are processed with a jigsaw - they are rounded, made curly, etc.

Fastening materials

It is also necessary to select self-tapping screws (for solid wood panels), confirmation bolts (for laminated chipboard). To connect the parts, take care of purchasing steel corners.

The decoration of the furnishings in the dining area should be carried out taking into account the general style of the room.

The kitchen corner seats are hung by means of special piano hinges. This makes the base reliable and durable. First, the hinges are attached to the sidewalls with bolts, and then to the seat panel from below. It is important to make markings for them in advance so that there are no distortions and, accordingly, failures during operation.

When working with chipboard, you will also need a matching edge band.

Preparation before assembly

To make the kitchen corner look neat, its wooden parts are cleaned with emery, and the outer edges are closed or varnished after trimming. Materials such as fabric and filler will require tailor's scissors, the usual ones are uncomfortable and cut unevenly.

Kitchen corners are often made with curly supports and a back.

Furniture fixtures are marked with a pencil and ruler. The kitchen corner should not only be stable, but also comfortable. Calculate the length of the main seat and the accessory (short) part. Their ratio is usually 3: 1 or 3: 2. This is the simplest model, consisting of 2 placement areas. You can make a complicated version, then the ratio of parts will be 2: 1: 1, 2: 1: 2 or 2: 2: 1.

The lower part must be made through so that the legs can move freely.

The master must remember that the quality of the finished product depends on the sequence of actions. You should not rush, but think carefully about everything.

The kitchen corner is made with a base on beams with lamellas or thick plywood. It should be tight, not loose. You can also use chipboard.

The standard length for a kitchenette is about one and a half meters.

Non-marking upholstery materials are used for kitchen furniture. Choose an easily washable fabric that will be free of streaks during maintenance.

One of the decor options - a corner with a luminous table - is created using luminescent and polyurethane paints.

Corner assembly process

Making furniture such as a kitchenette requires careful and precise calculations. Due to the compound design, the slightest misalignment can affect the stability of the product. Consider the simplest two-part model.

1. Prepare support panels. The side ones also act as parts of the back. It is recommended to immediately make thrust bearings.
2. Connect the backrest and support panels for the main and side sections separately. Take a universal glue, lubricate the seats with it and attach the foam rubber (synthetic winterizer), wrapping it from below. Press for a few minutes (you can put something weighty).
3. Glue the filler to the back and let dry well. Trim any excess flush with the sidewall.
4. Stretch the upholstery fabric and fasten it with staples to the panels, first bending the edges of the fabric.
5. Attach the seats to the main and side sections with loops so that you get an even corner. To do this, move the long element to the distance that the short one adjoins.

The kitchen corner can be made in three parts. The assembly sequence is the same, only before that you need to make a corner insert (90 degrees), and then fix all the parts. This process is quite laborious, it is important to observe dimensional accuracy in order to fit the rest of the parts without gaps.

Furniture fixtures are marked with a pencil and ruler.

You can also make a modular corner. To do this, you do not need to fasten the parts to each other, but simply place them side by side. This is convenient when guests come and you can move one of the seats to the other side of the table.

The wood will require careful processing and sanding so that there are no burrs and protrusions or dents from cut branches.

The uprights of the rear part may not be used if the weight of the seated people is calculated for an area of ​​50 sq. see assumed no more than 100 kg.

To make the kitchen corner look neat, its wooden parts are cleaned with emery, and the outer edges are closed or varnished after trimming.

Kitchen corner decor

The decoration of the furnishings in the dining area should be carried out taking into account the general style of the room. The exposed parts of the backrest and legs can be varnished with a natural wood shade - the most popular option. The trim of the seats can contrast with the color of the legs.

The kitchen corner seats are hung by means of special piano hinges.

Kitchen corners are often made with curly supports and a back. In the latter case, it is important that the decorative element does not fall on the place where the spine is leaning - this is rather uncomfortable when sitting. Beautiful curves in wood can be done with a jigsaw. Finished elements are varnished and dried well.

It is also necessary to select self-tapping screws (for solid wood panels), confirmation bolts (for laminated chipboard).

To the corner, you can make two or three small stools with matching upholstery. It is better to choose an oval table. All together will look like a single stylish set and create coziness in the kitchen. Provide adequate lighting. Wide flip-flop lamps on a cord, the height of which can be adjusted, are ideal for the corner area.

Wide flip-flop lamps on a cord, the height of which can be adjusted, are ideal for the corner area.

In country houses, many people prefer corners without upholstery, completely wooden - bench-type, with an open or closed (beveled) bottom. Such products look quite stylish and beautiful in combination with a wooden table to match if the edges are rounded and the wood has a nice texture. The wood will require careful processing and sanding so that there are no burrs and protrusions or dents from cut branches. One of the decor options - a corner with a luminous table - is created using luminescent and polyurethane paints.

The width varies from 50 cm.

VIDEO: Video instructions for assembling a kitchen corner

The kitchen corner is a part of the interior design that meets modern trends in interior design. This type of furniture is a functional addition to the standard kitchen furniture set. It is installed in the corner of the room, serves as a number of seats and acts as an additional space for storing household items. The corner is supplied unassembled, which means that it can be reassembled on site. In the absence of a qualified specialist, you can assemble a kitchen corner with your own hands.

Varieties

Kitchen corners can be produced in various variations. The differences between their models from each other are identified by the following features:

• constructive;
• functional;
• dimensional;
• stylistic.

The design of a separate kitchen corner may differ from the designs of other models and depend on the characteristics of the room in which it is installed.

The design parameters determine the ways of connecting component parts to each other, the presence / absence of certain constituent elements, a set of components.

The functionality of the corner is a characteristic that allows you to use it with maximum efficiency. The high level of functionality implies the presence of additional storage compartments, shelves, armrests and other elements. The component property of this parameter can be attributed to the wear resistance of the surface of the case and the soft part used for the seats. The higher the degree of resistance of such furniture to operational loads, the higher the coefficient of its functionality.

The dimensions of the kitchenette are determined by the individual parameters of the room. The more free space, the larger the corner you can place on it. The size criteria are also taken into account when calculating the number of seats sufficient for daily use.

The best matching of the size to the stated needs allows the production of a corner to order.

The style of corner furniture is determined by the design features of the entire room. When choosing a corner, the following are taken into account: its shape, presence / absence of straight or curved lines, color of the body coating, shades of the soft layer and other characteristics.

A corner made in the High-Tech style will not match the interior, the decoration of which is made on the basis of the basic principles of the Art Nouveau style. A similar combination scheme is valid for all stylistic directions.

Assembly tool

To assemble a corner in the kitchen, you need a minimum list of tools:

• screwdrivers (flat, Phillips);
• hex key for furniture;
• masking tape;
• hammer;
• pliers;
• other related tools.

Screwdrivers are needed to drive screws and other screw fasteners.

The design of the angle model may imply the presence of fasteners with different slot configurations.

A hex wrench is required to screw in the Euro bolts. These bolts are widely used in furniture design. They have a hexagonal internal slot. In most cases, the required key is supplied with the corner accessories. To speed up the assembly process, you can use a screwdriver and a bit-nozzle, which has a hexagonal profile, the size of which corresponds to the same parameters of the stock hexagon wrench. The use of a power tool allows you to reduce the degree of effort applied when manually screwing in Euro bolts.

Masking tape allows you to fasten the component parts together and hold them in the desired position before the various threaded fasteners are tightened.

It protects the surface of the furniture from damage that may result from the contact of the tool with the decorative coating.

A hammer and pliers are used to mount chipboard elements. These can be parts of the bottom of the case or the back wall. In most cases, when assembling furniture, fiberboard is fastened with small nails. It is better to use a light hammer to hammer them, which will help to reduce the stress on the forearm muscles and tendons. Pliers help in removing damaged nails and other assembly and disassembly work.

The peculiarities of a particular model of a kitchen corner may necessitate the use of additional tools.

Assembly

Before starting the assembly, it is necessary to inspect and unpack the boxes in which the corner is supplied. On one of the side surfaces of each package, there must be a designation of its number. Boxes with the same number contain parts of the same type.

Inside one of the boxes there should be a diagram showing the order in which the corner is assembled. Also, this paper contains a description of the list of components of the structure. It is necessary to make sure that the parts on hand correspond to the identical names shown in the diagram. In the absence of any spare parts, it is worth contacting the furniture supplier or purchasing them in a specialized store.

Grouping the component parts of the corner will help to facilitate the assembly process. Parts related to the same part of the structure should be placed together.

Next, the main elements are assembled. They can be side walls, front and back walls. In comparison with other parts, these parts are the largest. Thus, a bunch of parts that make up the main supporting structure are performed.

The connection of parts to each other is made with Eurobolts. When screwing them in, you should be careful and control the tightening force. An overtightened bolt head can damage the exterior trim.

It is important to align the bolt holes in the parts with each other. This is necessary for the correct assembly of the structure.

The misalignment of the holes relative to each other can lead to a violation of the symmetry of the product and negatively affect the quality of the assembly in the final stages.

After the main dimensional parts, additional components are mounted. They can be upholstery elements, armrests, shelves, drawers and others.

Technological marks should be put on the surface of the parts, determining the location of certain fasteners. It is important to adhere to the alignment of bolts and screws with their seating points. To ensure the best quality in this regard, you should periodically check the instructions.

The finishing stroke is pulling all connections to eliminate the occurrence of backlash.

After that, all Eurobolt hats are closed with special plastic plugs, the color of which matches the shade of the furniture block coating.

Installation

Due to its oversized dimensions, the corner is assembled right in the kitchen. This will simplify its further installation and preparation for operation.

The kitchen corner should be installed in the corner of the room with the most advantageous location. At the same time, he should not touch the wall covering, which will protect them from wear and tear at the points of contact.

How to assemble a kitchen corner, see below.

Is it possible to turn an ordinary kitchen into a center of attraction for households? Definitely, yes - creating a home out of the kitchen is not as difficult as it seems. Let's add a sofa to the kitchen, hang a TV and put on a small radio receiver: the place for holding family evenings is ready, it remains to buy a couple of board games.

It is still easier to buy furniture than to do something from scratch on your own, and it will take less money for such a product than for consumables, nerves and electricity, which will be required for making oneself. So, you are in the store, ordered with home delivery.

The most common kitchen corner for any small apartment

The bell rings and ... a huge number of packages and packages are handed to you: who would have thought that the assembly of the kitchen corner would fall on your shoulders. Well, there is nothing to do, we need to start the installation, let's see how to protect ourselves from low-quality goods and get a good result.

Initial inspection: how not to be mistaken

You should not immediately rush with joy and tear apart all the packages, dumping all the contents in a heap. Before opening, you must carefully inspect the packaging:

• First, we count the number of boxes brought and the amount indicated in the invoice. If there are discrepancies, do not hesitate to call the store where you bought the material for the corner
• Externally we inspect all packages, they must be free of defects. Even dented corners can signal material damage
• Only now we are opening the packages. If they are numbered, we do it in the same order. First of all, we check the compliance of the parts with the control sheet, which should be in each package.
• We carry out an audit of the parts, see if there are any flaws on them. Pay special attention to the seat and the fabric, the seat should be well fitted, and the fabric should look new and be stitched to the base of the seat around the entire perimeter.

When you receive your furniture, always check that the packaging is intact.

If you managed to find any flaws, you should not start assembling and make a corner. Take a photo of the detail, and if possible, take the marriage with you to the store and go there as soon as possible. It is for this reason that we do not recommend getting rid of the packages until the end of the assembly, because you could have missed something. In addition, chips may appear during assembly: if you have not violated the assembly technology, then this is a product defect.

Buying a corner from a large reseller, the assembly will not present any particular difficulties, since all the necessary components, including instructions for assembling the kitchen corner, are present in the packages. If you are going to buy a ready-made version, please note that such a structure weighs less than 10 kg centner.

Parts and tools

If you ordered a corner from a manufacturing enterprise, then you will need to separately purchase the following parts and tools:

• Screw tie (euroscrew) with a radius of 3.5 mm and a length of 0.5 cm
• Perforator and drills for it (No. 5-6) - for wood, of course
• Allen key for Euro screws
• Dowels
• Plugs (plastic and self-adhesive)
• Piano hinges / awnings
• Furniture footrests
• Optionally - screwdriver
• Self-tapping screws for installing corners, roller hinges and thrust bearing (4 x 16, 3 x 20, 4 x 30 - respectively)
• Small tools: screwdrivers, rulers, tape measures
• Pencil

Tools for assembling furniture in a special belt

How do we collect?

Start by sorting the parts. Put the tree to the tree, screws and other consumables - lay out by type, everything should be before our eyes. It is important that there are no extraneous things in the room and, preferably, "advisers". Even if you collect during the day, turn on the lighting, excess light will not interfere. First of all, the frame is assembled, the assembly starts from the edge parts:

1. We find a long side panel, with it we fix the front and rear of the case. Fasteners are made using euro screws and dowels. Do not neglect the dowels - they will add strength to the bearing part.
2. We visually check the strength of the fastening and see that the edges of the parts fit tightly to each other. After that, we turn the structure onto the sidewall and the holes for the fiberboard insert the rear plugs
3. Be careful here. We take the second side part, put it on top of the structure (covering it) and put it on the screws
4. We fix the thrust bearings for furniture with self-tapping screws, if something else is provided for in the design, we fix it with the same self-tapping screws.
5. Do the same for the short section (repeat steps 1-4)
6. Checking that the height is the same

Some models provide for the presence of external overlays on the sidewall; it is necessary to start installing this part after completing the assembly of the frame.

When assembling furniture, follow the instructions

We proceed to the installation of the seats upon completion of the assembly of both cases. The seat covers are attached to both sections at two points on the back. This is done so that they are invisible when the lid is opened. After the bench is completed, we proceed to the installation of the back of the corner. Please note that on serial models the lateral drilling areas are covered with fabric, do not be confused by the appearance of their absence, mark their location with confirms.

Next, we need a radius. You can start connecting the long and short sections. In frameless versions, first of all we attach the back to the seat, after which we put it in its place. We check how the covers open. We start by screwing in the confirmations, then we fix the lower part of the radius.

To assemble a kitchen corner from chipboard, you need to start by fixing the base of the corner part, and then the back with the seat is already mounted. It may happen that the back does not snap into place, then vary the sharpness of the angle. If this does not help, then there is a possibility that your kit has the wrong radius.

Furniture assembly fittings

Where the euro screws are fixed, insert the plugs.

The next table is

Now it's time to put the table together. We will describe the assembly of the common variant. We take one of the side panels and fasten the ties on it. When assembled, this structure is narrow at the top (which is perpendicular to the floor), and the lower panels resemble the letter T. It is important to observe the strictness of the right angle between them.! After all, we fasten the thrust bearings.

The finale is near: collecting stools

Another important detail: during installation, the tabletop itself must be on the floor. Only at the very end we put it on the resulting "skeleton" and fix it with corners.

There will be no special problems with the assembly of stools: a part that strengthens the product is attached to one of the side parts, then the second part is mounted on all this. We fix the foot pads again after everything. Thus, we collect the remaining stools, test them for strength with strong pressure. We put soft seats at the end of the entire assembly.

WATCH THE VIDEO

Summing up

If you have carefully read this article, you will notice that it is not so difficult to assemble a corner in the kitchen. The only snag may be with the material, if it is not chipboard, but solid wood - it will be harder to assemble. However, we recommend chipboard, as it is lighter, easier to assemble, and there are no various serifs, internal cracks, as is the case with wood. In addition, it is not inferior in strength to wood - this was shown by the furniture industry working with this material.

When choosing a stationary corner in the kitchen, pay special attention to the quality of the product, and then you will not have any problems during assembly. And such a corner will serve many times longer than the warranty period. Now you know how to assemble a kitchen corner.

One of the popular design solutions used in decoration is the installation of a corner. Such a piece of furniture has earned popularity due to its functionality, attractive appearance and the ability to optimize the use of space. This is especially important for small rooms. However, in spacious kitchens, the corner will not be superfluous - it will perfectly perform the zoning of the space.

Do-it-yourself kitchen corner - drawings and diagrams

What are kitchen corners

The piece of furniture, as the name implies, is being installed. The ensemble can include all elements: sofas (straight and corner), table and chairs (stools). But most often the corner is purchased separately in the form of three modules: long sofa, smaller seat and corner pouf... The table and chairs (if necessary) are purchased separately by the hosts.

As a rule, the configuration of the assembled corner resembles the letter G, however, U-shaped models are also produced. The design can be solid or modular. In the first case, it is necessary to clarify the orientation of the furniture (right or left). Models are available that allow a longer module to be used as a linear element, while the second element can be installed at a distance. Models with poufs symmetrically located relative to the corner element, each of which can accommodate one person, also fit perfectly into small kitchens. The corner can be installed even in a bay window, only its shape will be semicircular, triangular or polygonal.

For housing in which there are not enough sleeping places, and situations when it becomes necessary to accommodate a guest who has arrived with an overnight stay are not uncommon, a module with a full-fledged folding place for sleeping will become a real salvation. At the end of the sofa, a mini-bar can be placed or a folding shelf can be installed, which can be used as a.

What to focus on when choosing a corner model

When purchasing finished products and making furniture with your own hands, a number of factors must be taken into account.

Room dimensions

Kitchen interior items can vary in size and number of seats. It is necessary to select the configuration of the corner taking into account the layout of the kitchen, its size and the rest of the situation. The installed corner should not be an obstacle to a comfortable stay in this room. A convenient option for kitchens with a lack of free space is a corner with a transforming table. Folding stools can be used as additional seats, if necessary.

Kitchen corner options:

• corner modules for four people;

• model for a company of six;

• compact model for three diners;

• module with a berth.

Number of family members

The furniture installed in the kitchen should allow everyone living in the house to comfortably sit at the dining table. It is also necessary to consider the possibility of the arrival of guests. Of course, if the dining room is not intended for such gatherings. It should be borne in mind that a person of average build needs at least 60 cm for comfortable placement at the table.

Ease of use

The corner can be hard or have soft filler under the upholstery. In the first case, sitting on the sofa will not be very comfortable, especially for a long time, but it will last much longer. In addition to the fact that the upholstery of soft models wears out faster, the filler itself has a service life (for polyurethane foam - 10 years, for foam rubber (its elastic modification) - 3 years). In addition, rigid models are less prone to contamination. Such systems tend to be cheaper than more comfortable counterparts. And you can solve the issue of excessive rigidity with the help of pillows.

Availability of storage places

The produced models allow not only to use furniture for its intended purpose, but also to optimize the occupied space as much as possible. The presence of niches under the rising seats, in which you can store household belongings and food, or drawers, is very helpful, especially for owners of small spaces.

The material from which the case is made

For connoisseurs of natural materials and coziness in the interior, corners made from solid wood are suitable. They are attractive and environmentally friendly, but usually quite expensive. An analogue of a tree is laminated chipboard and LMDF. These, cheaper and not always safe for health materials, are currently most often used in the manufacture of furniture. If you wish, you can also purchase a corner made of metal... Metal structures are characterized by durability, strength and resistance to external influences, but they can not be installed in all interiors. A combination of different materials is often used in production.

Material used for upholstery

You should choose the appropriate option, focusing on the design of the room and the functionality of the coating. Natural or artificial leather can be used for decoration. Recently, the synthetic version is practically not inferior in quality to the original, but its cost is significantly lower. The impregnated synthetic fabric is also quite easy to clean from dirt, does not fade in the sun and does not attract dust. Aesthetically pleasing and pleasant to the touch, pile fabrics are not easy to maintain. Beautiful jacquard that looks like a tapestry or suede can be expensive. A good option is a fabric-backed Teflon coating. Models with a combination of finishing materials are interesting.

Kitchen design style

This factor is closely related to the previous two. If the kitchen is decorated in high-tech or techno styles, you can opt for metal structures. For classic kitchens, wooden furniture is suitable. One thing is important - the installed corner should not get out of the general concept of decoration and furnishings.

Prices for different types of kitchen corners

Kitchen corners

Making a kitchen corner with your own hands

Assembling a kitchen corner on your own is not an easy task, but quite feasible. When manufacturing furniture, the following steps must be followed.

1. Take off the dimensions of the kitchen in order to determine the dimensions of the structure and the option for placing the furniture. The location of the door and window must be taken into account.
2. Make a drawing of the assembled structure. You can compose it yourself or use ready-made options.
3. Purchase materials and accessories. Cut in accordance with the drawing.
4. Assemble a corner from the prepared parts.

It is easiest to make a corner on your own, the body of which is made of wood or wood-containing materials. For those who are not very good at carpentry skills or do not have a suitable tool, you can use the services of specialized organizations and order cutting of parts according to their drawings there. Those who want to make furniture on their own, at least, must have a circular saw, a milling machine, a screwdriver, a grinder and a stapler, if you have to upholster the product with material.

Prices for staplers

Construction stapler

Average sizes for a kitchenette, where it will be convenient to be at a meal:

• height from the floor surface to the seat: 45 ... 47 cm;
• height with backrest: 87 ... 90 cm;
• seat depth: 45 ... 50 cm;
• the total length is calculated individually, based on the needs and dimensions of the room.

Take, for example, a standard design with three seats for a long sofa and one for a short one.

The height of the corner is 90 cm, the height of the seat is 45 cm, its depth is 50 cm. fillers.

Corner assembly technology (for example, a long sofa)

Step 1. The first stage in the production of a sofa is the manufacture of a box.

Sidewalls, bottom, front walls of the frame are assembled on dowels (glued). The result is a fairly simple design.

The sidewalls of the back are attached.

Cordless Drill Prices

Cordless drill / driver

Support rails are installed.

Self-tapping screws are used for connection. Inclined supports for the back are attached.

The chipboard back is fixed with self-tapping screws.

Horizontal slats are installed in the box, hinges are mounted to them (while they are only getting profit, they will finally be installed after the sofa is upholstered), with the help of which the box cover will be lifted, which serves as a seat.

The lifting box cover is cut to size (also made of chipboard).

Step 2. The upholstery is being prepared. Pieces of foam rubber are cut off.

Installation of a soft filler is carried out on a special glue, which is designed for gluing wood and foam rubber. Foam rubber is attached to all surfaces of the corner frame, except for the bottom. Thicker material is used for the back and seat upholstery.

A synthetic winterizer is laid on top of the foam rubber (it reduces friction between the upholstery and the filler).

A leather substitute is cut out, a cover is sewn.

Important! It is not at all easy to correctly measure the dimensions for making the cover and sew it. It is recommended to contact a specialized organization for this.

The material is securely attached to the corner. In this case, you cannot do without a furniture stapler.

Foam rubber with padding polyester is also placed on the seat and covered with material.

Prices for a range of pneumatic staplers

Pneumatic staplers

Step 3. The frame from the back is sewn up with a thin sheet of chipboard.

Sheathing material is attached to it, after which the back wall is also decorated with a leather substitute.

The hinges are fastened. A seat is hung on them.

In the same way, a small sofa is assembled and refined.

It is necessary to treat furniture upholstery responsibly, since any defects in the form of folds or protruding material will instantly spoil the appearance of the furniture. The second structure also has seat hinges.

The leather substitute is firmly attached around the entire perimeter. The legs are fixed.

The result is a very attractive and stylish design, which, moreover, is distinguished by functionality, since, thanks to the raised seats, it turned out to organize additional storage spaces for various kitchen utensils.

It is not so easy to assemble such a structure on your own. The most affordable kitchen sofa assembly scheme is as follows.

When cutting foam rubber, it is extremely important to take into account the allowance for closing the ends. The soft filler and fabric are secured with a stapler. Structurally simple, but elegantly decorated corner, produced on our own, will be able to adequately fit into the interior of any kitchen.

The upholstery of kitchen furniture largely determines the appearance of the structure. However, it should be remembered that defects in the coating that appear are not a reason to send a model that has served faithfully and truthfully for scrap. Armed with a stapler and glue, having prepared a new fabric and foam rubber, you can quite quickly not only restore the appearance of an interior item by removing the material that has become unusable, but also make the furniture even more attractive.

Video - How to make a kitchen sofa with your own hands