Simple crafts from plastic bottles with your own hands. Crafts from plastic bottles - ideas for a summer residence, a garden and a vegetable garden

From an ordinary plastic bottle, you can form products that are useful in playing with children, household, home interior. From unpretentious material, you can prepare a craft for kindergarten. Children can independently cope with elementary manufacturing schemes with little or no help from adults. In addition to plastic bottles, you may need a glue gun, paints and scissors.

To make any craft from a plastic bottle, you need to prepare the necessary tools and materials:

plastic bottles are the main material;
scissors, blade and clerical knife - used for cutting;
acrylic paints - useful for decorative finishes;
brushes of various thicknesses for painting;
candle for burning sharp cuts;
glue gun for joining parts;
construction stapler to attach other elements to the base.

Additional materials are selected depending on the complexity and decorative finish.

DIY ottoman from plastic bottles

A craft from a plastic bottle for home improvement is the best option for price and quality. Diversified furniture can be made from raw materials, in particular an ottoman.

You will need the following tools and materials:

38 plastic bottles of the same volume and shape;
a roll of wide stationery tape;
plywood sheet;
jigsaw, scissors, stationery knife;
rolled synthetic winterizer;
construction stapler;
measuring tape and pencil;
dense fabric for upholstery.

DIY craft from plastic bottles: step by step making a round ottoman

Algorithm for creating a ottoman:

Arrange the bottles so that they resemble a honeycomb in shape. In the 1st row there are 4 elements; in the 2nd - 5; in the 3rd - 6; in the next - 7. The remaining 3 rows are displayed according to the principle of 1st, 2nd and 3rd.
Wrap tightly with stationery tape. You need to make several layers and wind it from the top of the bottles to the very bottom in a spiral - you get the basis of the future ottoman.
Measure the diameter of the resulting honeycomb. Sketch a circle with the resulting diameter on plywood. Make 2 such details. It is advisable to try on circles so that they match the parameters of the base shape.

DIY craft from plastic bottles: step by step making a square ottoman

Using a construction stapler, nail the plywood circles on the top and bottom of the pouf base.
Wrap the sides with padding polyester. Cover the circles with soft material too. Fix the soft base with a construction stapler.
Take measurements from the resulting blank and make patterns from textiles. Sew a cover, which is then put on the body of the pouf.

Furniture of this type can be made in a few hours, it looks presentable, and the costs are minimal.

Flowers from plastic bottles

There are many options for creating flowers from plastic bottles.

The easiest way to create a voluminous flower:

Cut off the bottom of the bottle so that the height of the resulting object corresponds to 5-6 cm.
Divide the circle into 5 equal parts with a marker. The markings are made so that each part includes the bulge of the bottom. Cut the plastic to the very bottom of the bottom at each of the marks.
To form attractive petals, you need to round each resulting strip.
Process the edges of the slices by dusting over a candle flame.

Make a hole in the center of the bottom using a heated nail, awl or soldering iron. Pass a dense wire through it, which will become the stem of a plastic flower.

Toys from plastic bottles

A craft made from a plastic bottle can become a sturdy, interesting and budgetary toy for a child of almost any age.

Several options for toys:

Apple-casket

Octopus

Piggy bank

Cut off the bottoms of two identical bottles. The height of each element must be the same and be more than 6 cm.

In the center of one of the parts, make a hole with a heated nail.

Cut a strip from the canvas of a green bottle, twist it into a tube - you get a stalk. Cut a leaf from the same strip.

Glue a leaf to the handle, thread a tube through the hole in the bottom. Everything is fixed with a glue gun.

If you insert one bottom into the other, you get a full-fledged apple in which you can store small things.

Cut the bottle in half. Measure a distance of 5-8 cm from the cut. Divide the circle into parts, the thickness of each should be 1-2 cm.

When cutting the plastic along the marks, stripes are obtained. Tighten the elements with a scissor blade.

Make eyes out of the caps. Draw the pupils with a marker, and then attach the blanks with a glue gun to the body of the octopus.

Make a hole in the bottom, thread a thread through it. You will get a toy analogue "Yo-Yo".

Pick up a bottle with a wide bottom. Using a marker, draw nostrils on the cap, eyes on the bottle itself.

Cut a narrow rectangular hole at the base of the housing.

Make stable support legs from the covers, attaching the elements with a glue gun.

Cut ears out of thick cardboard and glue to the base.

You can make any toy out of bottles by creating a mock-up of the product:

Zhukov;
fruits;
vegetables;
transport;
dolls;
figurines.

House made of plastic bottles

From plastic bottles, you can create a house that will be a refuge for children in the yard, the basis of a sandbox.

You need to make blanks:

more than 500 tons of bottles of the same volume and shape;
timber and plywood;
nails, wire, construction stapler;
sharp knife, nails;
4 hemp;
tools for making measurements and markings.

Construction algorithm:

Make the body of the future house from a bar. Wooden bases are knocked down in such a way that frames are formed - the bases of future walls. Shoot down 2 more frames, which will become roof slopes. Place the body on the hemp-legs. Lay plywood underneath.
Determine the diameter of the container. Mark the upper and lower beams in accordance with the obtained parameter. Drive a nail in the center of each strip.
Cut off the neck of each bottle so as to remove the narrowing points of the element. A hole in the center of each bottom with a hot awl.
String so many blanks on a wire cut so that they form a full-fledged strip from the upper bar to the lower body. In the process of forming a strip of a wall, you need to make sure that all parts sit tightly relative to each other.
Fasten one end of the wire to a nail driven into the top bar. Stretch the metal base like a string and fasten the bottom wooden base to the nail. Make as many strips as possible to make a wall.
To strengthen the walls, you can knock the bottles together with a construction stapler.

The roof is made according to the same principle. The overlap can also be made flat using the wall manufacturing algorithm. By changing the direction of the "strings" on which the containers are strung, windows can be made.

Plastic bottle doll

A craft made from a plastic bottle can be a completely functional doll that you can play.

List of tools and materials:

plain fabric in pastel color;
synthetic winterizer;
2 buttons;
Knitting;
printed fabric;
needle with thread;
marker;
bottle;
glue gun.

Manufacturing technique:

Head shaping. Cut a circle out of plain fabric. Sew along the edge with a small line seam. Pull the workpiece a little, fill it with padding polyester. Tighten the thread completely and secure the seam. Sew on the buttons-eyes, draw a nose and lips with a marker.
Neck making. Cut a wide strip from the same textile. Sew the cut on one side, pulling the textiles slightly. Attach the element to the seam of the head and sew on the pattern. You get a kind of skirt at the bottom of the head.
Hairstyle creation. Cut the knitting thread into equal pieces. Thread each part through a needle. Make a stitch on the doll's "head". Pull out the needle and tie the thread 2 knots. It turns out just 2 hairs. After repeating the manipulations with the help of scissors, trim the hairstyle.

Hand making. Cut 2 strips out of pastel fabric. Sew each strip, forming a tube. Fill the space with padding polyester, sew up the edges.
The torso. Cut off the bottom of the bottle. Treat the area near the neck with a glue gun. Set the head on top, and lay the skirt-neck along the adhesive part. Using a glue gun, attach your hands to the base of the container.
Take measurements from the container and sew a sundress or dress for the doll. Put clothes on the doll. You can fix the element with glue.

You can make a more complex doll model using other auxiliary materials.

Do-it-yourself bird from plastic bottles

It is easy to make a parrot or an owl from a plastic container, since the silhouette and manufacturing principle are identical.

Preparation:

2 identical containers;
several multi-colored bottles;
scissors or clerical knife;
glue gun;
2 caps and a marker.

Manufacturing algorithm:

Make a base from the same containers. Cut out the middle part from one container and connect the cuts to each other, cut off the bottom from the second before expanding. Using a glue gun, connect the bottoms to each other. You will get a kind of hourglass.
Cut out the middle parts from the rest of the containers. With a marker, draw the number of ovals that will fit on the canvas.
use a glue gun to attach the ovals to the base. It is necessary to do so that each next element breaks up 1/3 of the lower one. The resulting feathers are layered.

Ovals fit in a specific pattern. When making an owl, eye circles are first formed, then the rest of the head is filled in. In a parrot, feathers are distributed evenly throughout the body - from top to bottom. Eyes are made from the caps.

Flower bed from a plastic bottle

A two-tier flower bed made of plastic bottles is neat, compact and at the same time capacious.

Manufacturing technique:

Prepare a place for a flower bed, determine the parameters and shape of the product.
Dig a small groove that will become the outline of the flower bed fence.
Fill the containers with sand or earth, tighten the lids.
Bury the filled container in the groove. Submerge containers in the ground a little more than half. Bury with the neck down.
Having formed the lower tier of the flower bed, you need to fill the inside with earth. To prevent the bottles from spreading out under the action of the soil, you can pull them together with a wire. Tamp the earth.
Thanks to measurements and calculations, determine the center of the flower bed and make another one of the same fence, but of a smaller size. Cover with earth and tamp.

The flower bed is ready for planting. Additionally, the structure can be strengthened with natural stone, brick, tiles.

Birdhouse from a plastic bottle

For the manufacture of a birdhouse, it is better to take a 5-liter plastic bottle. Additionally, you need to prepare scissors and a glue gun.

Manufacturing features:

Cut off the bottom.
Remove half of the bottle base.
At the base of the neck (parallel to it), with the help of folds, form the silhouette of a house with a gable roof. You can bend the plastic using scissors.
Bend the rest of the bottle according to the layout.
Attach the model to the cut bottom and cut out a shape from it. Glue to the house with a glue gun.

You will get a full-fledged house, the "entrance" to which is through a wide neck.

Bird feeder from a plastic bottle

A craft made from a plastic bottle can be a bird feeder.

Simple manufacturing option:

Pick up a bottle in the form of a keg with a volume of 1.5-2 liters.
Cut out large arched windows at the base of the container. Better to make 4 openings.
Burn 4 holes at the same level in the neck area. Thread a wire or thread - you get fastenings.

Grain is poured into the bottom, through the windows the birds can get into the trough.

Palm from plastic bottles

To create a plastic palm tree, you need to collect more than 100 brown and 100 green bottles, prepare a construction stapler.

Manufacturing technique:

Cut the bottom of each brown container. Form 5 rounded petals 5-7 cm long from the container linen.
Sticking the bottle neck into the bottle with the petals up, fix each element with a construction stapler.
The neck and bottom are cut off from green containers. Bend the cylinder in half along the heights. Cut the element along the fold. Use scissors to make a terry along the long sides of the rectangle, cutting the edges into thin strips.
Put the green part on half of the other and fix it with a stapler. Leaves are obtained.

At the end, the crown and trunk of the palm tree are assembled. You need to connect the parts tightly - it is advisable to use wire. In order for the barrel to stand, you need to thread the blank with a metal pin.

Crafts from plastic bottles for preschoolers

A preschool child can make a toy or craft out of plastic bottles, which is important for all kinds of contests in kindergarten.

It is worth choosing simple options and schemes of work so that the child can do everything at once, and help from adults is minimized.

chamomile

Pick up containers from yogurt or milk. It is desirable that the lid is orange, and the container itself is white. Cut the bottle in half. Divide the base of the upper part of the bottle into 8-10 equal parts.

Cut into strips to the very neck. Round off the edges and twist slightly with a scissor blade. Bend each petal to the bottom. Screw on the lid.

Make a hole in the center of the twist by burning the base with a hot nail. Thread the wire - get the stem. Cut leaves from green plastic and glue to the metal base with glue.

Penguin

Take 2 identical curly bottles. Cut one in half - leave the part with the bottom. Cut off the larger half from the second, leaving only the lower part. Connect the blanks, holding them together with glue.

Paint over the form with black paint, the bottom with any other. Use white paint to paint the base for the front part. Shape the muzzle. Glue a thread pom-pom to the colored bottom. At the transition point, tie a ribbon that will act as a scarf.

Crocodile

2 green containers will come in handy. From the first, cut off only the bottom and the solid part of the neck. Glue the edges of the smaller cut. Cut off the dense part of the bottom and top from the second container. At the point of narrowing, cut off half the bottle lengthwise.

Cut 20 triangles out of white paper. Make eyes out of colored paper, fix on the base. Glue the elements along the cut. Connect the bottles together. At the bottom of the form, glue 4 covers - these are paws.

Bees

Paint a small bottle with yellow, form black stripes along the entire "body" of the bee. Glue decorative eyes on the lid. You can draw with a marker. Cut out a medium-sized oval (wings) from a transparent or brown bottle.

Attach the manufactured parts to the base of the container. Make legs from narrow strips cut from the same container as the wings. Make a hole between the wings through which you can thread a thread - such a detail will allow you to hang the insect.

Butterflies

Cut out the soft part from the plastic container, forming the canvas in the form of a rectangle. In accordance with the size of the base, choose a butterfly stencil. Apply a plastic base to the stencil, fix the components at 4 points with clothespins or office clips. Draw a marker around the contours, transferring the drawing to the plastic.

Place the sketch on the board and cut out the shape with a utility knife along the contour. Additionally, you can cut out some parts of the wing pattern. You can paint the product along the marked lines with nail polish. To add shine, you can use sequins, beads and rhinestones.

Hedgehogs

Prepare 20-25 brown plastic containers. A transparent base is also suitable, which will then have to be painted over. Cut all parts in half. Create a fringe by cutting the strips to a tight spot in the neck area.

Assembly is in progress - insert bottles into each other. Draw the eyes of the animal on the first container. The plug represents the nose of the animal. On the "needles" you can put an apple made from bottles.

Helicopter

Choose a ball for table tennis and a container, the diameter of which will be the same as that of a sports equipment. Additionally, you will need cocktail straws, glue, scissors, and a safety pin.

Procedure:

Cut off the bottom of the container, leaving the neck screwed up with a lid. It is enough to use a part with a length of 5-8 cm.
Make a cross from straws and fasten with a safety pin. Attach to the cut of the bottle.
Cut a strip from the container around the circumference, divide it in half.
Glue a piece of straw to a narrow strip along the edges. Use the part of the fixture that has a fold.
Glue the part to the bottom of the helicopter body - on the other side relative to the blades.
Insert a tennis ball into the cut hole of the container.

Glue the tail on the lid, which is made from cocktail straws. This part of the helicopter can be modeled after a real aircraft.

Matryoshka

The matryoshka is made using two techniques - working with plastic containers and papier-mâché. Choose the most curly container. On the surface, glue pieces of white paper that are dipped in PVA glue.

Cut off a stiff throat. The hole is repaired according to the same principle as the base of the bottle. When the base is dry, smooth the surface with a damp brush. Draw the blank according to the matryoshka sketch. You can use gouache or acrylic paints for this purpose.

Fly agarics

Prepare 2 containers - with a capacity of 2 liters and 0.5 liters. Cut off the bottom from a larger one, paint over with red paint. Make white dots. Treat a smaller container with white paint. Cut a rectangle out of paper, form a fringe on one side.

Stick to the middle of the white bottle. Fix the "cap" of the fly agaric on the white leg. You can make an additional fly agaric in a smaller size and glue it to a larger element.

Household supplies from plastic bottles

From a plastic bottle, you can make not only jewelry or children's toys, but also functional products that are relevant in everyday life.

Options for things:

Flowerpots for indoor and garden flowers. Cut the container in half, give the base its original shape and paint.

Country washbasin. Cut off the bottom. Fix the container upside down. With a slight slackening of the lid, water begins to pour out.
10 identical containers can be used to make a broom for outdoor cleaning. Cut off the lower parts. Fold each piece in half lengthwise and create a fringe. Thread the elements by connecting them with wire.

The containers cut in half can make the ideal seedling caps for your vegetable garden. If you remove the covers, the cover will be additionally ventilated.
If you cut off 1/3 of the top of the bottle, you get a wonderful container for storing pencils, crayons and other little things.

Plastic containers can be the basis for weaving a variety of baskets that can be used on the farm.
If there is a zipper between the two parts of the cut container, then you get an original organizer for storing cotton wool, bandages.
Cut off the bottoms from several containers, string the parts through the center of the element onto a metal rod. Spread the bowls evenly along the rod. You will get a stand for jewelry.

Cut the bottle in half. Cut a square at the base. Such a device becomes a pocket for the phone, which is put on the base of the charger, and the phone is placed in the bowl.

You can decorate the craft by using paints, rhinestones, beads, glass stones, beads, ribbons. The elements can be attached to a plastic bottle using a construction stapler or a glue gun.

Article formatting: Natalie Podolskaya

Video about plastic crafts

DIY craft from a plastic bottle - video instructions for making:

What skillful hands do not do from unnecessary (waste) items. Crafts from bottles with their own hands are made for arranging summer cottages, playgrounds. Moreover, they look very attractive and original. Plastic is the cheapest and most affordable and highly flexible material. From it you can create figures of animals, flowers, dolls, children's vehicles, borders. Some craftsmen use them in the construction of gazebos, fences, greenhouses, garden furniture and even boats.

Features of plastic as a material

Many people throw away plastic containers, considering it garbage, but this is a unique material for handicrafts that will certainly be used in the household. Its features as a material for creativity are that:

For the manufacture of crafts and work, you do not need any complex tools or devices, except for those that every good owner has in the house: scissors, sharp knives, candles, glue, stapler, drills, glue gun, and so on.
Not only the bottle itself will do the job. From the covers, you can create colorful panels, paths, decorate old furniture with them.
Thanks to the flexibility of the fluor bottle, even flexible structures can be created both indoors and outdoors.
Crafts can have different shapes and sizes, so both very small bottles and large bottles will come in handy.
Plastic is considered a safe material, so you can create crafts from it for playing at home or in kindergarten.

What bottles can be made for kindergarten or in kindergarten

Creating characters and all sorts of figures for children is a special direction of amateur creativity. It is advisable to do them together with them. So it is easier to teach them to perseverance, to teach attentiveness, concentration, to develop imagination. Let's consider, using the example of master classes, how to create simple figurines and fairy-tale characters for children.

chamomile

There are several options for making this delicate flower.

Option 1

You will need white bottles to work. They usually sell their milk and you should collect a little. As a last resort, you can use transparent, but then recolor it white. We need 3 bottles for each chamomile. All of them must have the same neck diameter, otherwise we will not be able to put together the curvy parts.

Cut off the upper part (neck with lid), just below the expansion point. We do this with only two bottles, leaving one. It is desirable that the lid be yellow.

Cut out about 8 petals at each neck. Only so that they hold on, and not disintegrate. Bend them alternately in the opposite direction.

Let's start collecting the flower: we put on one of the blanks on top of the one that remained uncut.

Then the second is exactly the same.

We unfold and bend the petals so that the chamomile looks natural and lush.

We fix all three layers with a lid, trying to make it tighter.

Such flowers can be left as they are, or, after assembly, they can be painted in different shades. They can be planted on a wire stem or attached to a fence.

Option 2

This daisy is more complex in design, but also looks more natural and beautiful.

Cut circles from the cylinder of the bottle (about 8 cm in diameter, more can be done if you want to create a large chamomile). Each will require three mugs

We subsequently cut each circle into 16 strips and form flower petals from them.

In the center, we make a hole with an awl, hot on fire.

A little later, when we collect the workpiece, you need to hold it a little over the fire. So the petals wrap themselves, creating the correct chamomile shape.

Cut out the core of the flower from the yellow cover, pierce it and fasten it with a wire with an inflorescence.

We make a sepal from a green bottle, we also melt a little over the flame.

First we attach a sepal to the stem, then three blanks of petals, a core and bend it with pliers so that the chamomile does not disintegrate. After bending, we draw the wire through the sepal again and twist it with the stem.

The stem will be a wire on which thin strips (about 5mm) of green plastic are wound. In order for the layers to be well held together, they also need to be scorched.

If you want to create a whole composition, make the leaves by cutting them out of green plastic, singe them a little, and wind them around the stem.

You can bouquet and diversify the bouquet by combining them with cornflowers. Here you need blue plastic, the petals are cut in the shape of cornflowers. A flower is collected similarly to a chamomile.

Using this technique, you can make any kind of wildflowers, and even roses, if you can roll them correctly.

Option 3

Now let's try to make a giant daisy.

As you can see, to create such wonderful decorative flowers, it will take only a few hours of time, bottles, an awl, a candle, glue and scissors.

Penguin

Plastic bottles from under the "Cola" are useful for creating a penguin, due to its narrowed shape in the middle and expansion at the bottom, it turns out a believable body of a penguin.

Tools and materials:

2 bottles of the same size;
scissors;
cool gun with silicone pencils;
brushes;
black marker;
a piece of dense fabric;
white, black and red paints.

Step-by-step assembly of a penguin:

We cut the container in this way: the first, acting as the lower part, is cut in the middle or slightly closer to the bottom, the second is the top of the penguin, so we only need the bottom. Rice. 1
Now we connect both parts with slices to each other. Fig. 2
When connected, fix with glue (you can use a silicone gun). Fig. 3
Next, according to the plan, we will paint the body of the penguin. Choose the type of paint so that it is not afraid of moisture. We paint the future toy in several layers. Rice. 4
When the paint coating dries up, outline the chest and muzzle with a black marker. Fig. 5
Paint over the outer part (behind the contours) completely with black paint. We leave only the top - this will be the place for the hat. Riess 5.and 6.
In principle, the penguin is almost ready. It remains only to paint the place left under the cap with red paint. You can, as shown in Figure 8, decorate it with black dots.
Draw eyes and a beak on the face. This can be done with a thin brush and paints, or you can use colored markers. Rice. nine.
Cut a scarf from a small piece of fabric, tie it on a penguin.

Crocodile

Let's try together to make another toy for kindergarten - a crocodile.

For work, prepare:

two plastic bottles with a volume of 0.5 liters;
twist plugs from the same container - 4 pcs;
sharp knife;
stationery scissors;
thin cardboard;
glue;
brushes;
waxed paper;
paint for painting;
buttons for the eyes.

Manufacturing and assembly instructions:

First cut the bottles in half, then so that a distance of about 7 cm remains to the neck.

It is necessary to form the edges so that when assembling the crocodile's body is slightly bent. As shown in the photo.

Glue the covers at the places of the legs.

Form dense balls out of cardboard - eyes, attach to the body.

Cover the entire body of the alligator with green colored paper.

Cut out eyes, teeth, paws from waxed paper.

Use a brush to paint teeth (white), nostrils (black), eyes (also black) or use dark buttons as eyes.

Bees

These funny insects are very easy to make.

Option 1

Prepare in advance:

plastic container with a capacity of 0.33 l;
sharp scissors;
acrylic paints;
a glass of 0.5 l;
brushes;
glue;
black electrical tape;
wire;
stationery knife.

Instructions for implementation:

Cut the wings of the bee from a plastic cup, as shown in the photo.

You do not need to cut the bottle completely. We make only small cuts on the sides, with a clerical knife. These will be the placements for the wings.

Slide the wings into place, glue them.

Next, we start painting the bee. There are two ways to paint: paint the body black, then make yellow stripes, or vice versa, make it yellow completely, then draw black stripes. Let's use the first one - paint it dark.

Draw the eyes in white on the lid, and red for the mouth.

Option 2

You can make it in one copy, you can create a whole hive

To create a hive, prepare:

plastic bottles according to the estimated number of bees;
yellow enamel or paint;
black electrical tape;
wet brushes - 4 pcs;
for the eyes - beads or buttons;
glue gun;
synthetic thread;
leg-split.

We paint plastic bottles yellow. You can do a little differently - pour the yellow paint inside, twist the bottle so that the paint evenly lies on the entire inner surface.

This method is a little more difficult and longer, but the staining will turn out to be more effective and with gloss. In addition, it will not wear out, break and deteriorate.

This should be done in several stages in order to evenly paint the entire surface. Collect paint in a bottle, shake and lay on one side. As soon as the first layer of paint begins to set, twist it to paint the next area and so on until the end.

When the bees' bodies take on a yellow color, we make transverse stripes with black electrical tape.

We glue the eyes on the lid, a nose made of pre-prepared beads and buttons.

Cut out shapes that look like wings from another plastic container. To them, at the same stage of work, we attach threads. For them, we will then hang the bee from a tree.

To the body of the bee, use the same glue gun to glue the thread with the wings.

Color it yellow too. You can, again, use a complex painting method. Or, so as not to waste a lot of time, just paint on top with a brush.

We will make the roof of the hive out of baking brushes. We take them in a heap, tie them with twine.

On the lid of the bottle - this is the area of the roof, we apply a thick layer of glue. We spread the brushing brushes on it so that they are evenly distributed on all sides. If somewhere they peeled off a little, glue it.

We leave the craft at rest for a while to dry.

Everything is ready and the bees and the hive. It remains only to carry it to kindergarten and hang it on a tree.

In a similar way, you can make many bees, but without a hive, and hang each one from a tree. Thus, creating a real children's beekeeping center.

Making bee crafts is an interesting activity, the work is not difficult. If the child makes it himself, under your careful guidance, it can be a good souvenir for grandparents. Such a craft will look very impressive against the background of the abundant foliage of the tree.

Butterflies

Simple and very interesting craft model.

Option 1

We will prepare materials:

plastic containers (a few pieces will be enough);
paper, not less than A4;
stationery scissors;
silver and brown nail polish;
sequins;
gel red pen;
rhinestones;
butterfly in a stencil.

We start making an insect:

First, let's prepare the bottles for work: wash them, preferably with soap, free them from the label, dry them.

On a blank sheet of paper, we will scan or transfer the shape of a butterfly through a carbon copy. For this we need a stencil. You will find it at the end of this subsection.

With a gel pen, you need to trace the contours of the insect to the surface of the plastic and cut it out.

We have a figure with wings curved downward.

Let's turn it over, we need them to look up.

Take the gel pen again and draw all the lines as shown on the stencil.

We paint over the middle (torso) and antennae with silver nail polish. Let's draw the outlines of the wings in the same tone.

Now you need to draw with varnish all the rulers, including the smallest ones, which were previously drawn with a gel pen.

We put small dots (blotches) in front of the edges.

Against the background of the silver drawing of the wings, we also put dots, only in brown.

We decorate the body of the butterfly with rhinestones. To do this, with any nail polish, put the droplets and put a pebble on top.

The butterfly is ready, for everything about everything, it took us a little time and material, which, for sure, can be found at home on the farm and at mom's.

Similarly to the previous butterfly, we make another one, only this time monochromatic and without pebbles.

We got two plastic butterflies, painted in the same tone.

If you stick a magnet to them, they will serve as a good decoration on the refrigerator or any other metal surface.

Option 2

Let's look at another option. We will paint it not with nail polish, but with stained glass paints. In the first version, we drew a butterfly on plastic, cut it out, and only then proceeded to paint. Here the technology is different. We will draw an insect on the bottle, and we will paint it on it.

We will prepare everything that will be useful in your work:

stencil drawing paper:
plastic containers;
stained glass paints;
wire or thick line;
scissors;
beads (several small pieces);
awl.

Step-by-step instructions for implementation:

We transfer the butterfly from the stencil to the paper.

Let's redraw the insect onto the plastic. You can do it like this. We cut the bottle, adjust the drawing from the inside so that we can clearly see it from above. With a gel pen, transfer the contours to the plastic.

When we finish drawing, we can start painting. Recall, we paint without cutting out the insect, the paint falls on the bottle, along the contours. After painting, leave the blank to dry. After it dries well, cut it out. Use your fingers to shape it.

We form the little body. To do this, take a wire or fishing line that we have prepared, string a few beads on it. You can take the same color, or you can make it multi-colored, as your heart desires.

A butterfly, or not one, if several have been made, are ready. They can decorate indoor flowerpots, hook onto curtains, attaching a pin from below, it is better to glue it.

If the insect is made by a child's hand, then it will be a pleasant surprise and a gift for March 8 for mom, teacher or grandmother.

Stencils for making butterflies

Hedgehogs

Waste material has a lot of possibilities and ways to prolong its life. Moreover, every family has at least something, yes. There is no need to buy or invent something special here, and even more so to spend money on them. Let's try to make a hedgehog from the same waste material, which is used plastic containers.

For work, we will need:

plastic bottle;
pine cones, about a dozen, the main thing is that they are the same size;
two white caps, from the same bottles;
glue (you can use "Moment" or, if there is polyurethane foam);
colored plasticine.

Technique for creating a hedgehog:

First, we put the container in the proper form: wash it, clean it from the label, wipe it and dry it.

On the prepared container, directly from above we glue the cone on glue or foam (you can also use a glue gun, if there is such an item on the farm). We start from the center, this will be the back of the hedgehog. We glue each cone as a separate element, after making sure that the previous one is firmly in place.

If at least one of them falls, and the neighboring ones hold on tightly, then it will be difficult to "put" it in place. Consider this and take your time.

When all the cones are the needles of our hedgehog, will be planted in their places, we will proceed to the formation of the muzzle. To do this, glue the bottle cap with black plasticine.

For the eyes, you will need white caps prepared by us. On them, in the center, we glue circles from the same black plasticine - these will be the pupils of the hedgehog.

Glue the eyes to the animal's face.

Now let's embellish our craft a little. What a real hedgehog without supplies. We will make mushrooms, leaves, fruits and berries from plasticine. Then lay it gently on its back.

You can create a baby for the company of an adult hedgehog by sculpting him with their plasticine. And since its dimensions will not give an opportunity to experiment with pine cones, the needles on the body can be made from sunflower seeds.

Helicopter

An interesting craft that you can do with your son for kindergarten. Thus, you will teach him to use various junk material as material for creating toys and other necessary things.

For work, prepare:

a small plastic bottle, you can use baby yogurt;
one tailor's pin;
3 tubes for juice;
scissors;
one ping-pong ball;
stapler.

Step-by-step execution of work:

First, make a hole in the lid so that the tube can freely enter.

Cut the bottle so that the top (thickened) part remains intact.

Take the remaining 2 tubes, cut them to the length of the intended propeller blades.

Cross them and pin them in the middle. Insert the tail of the helicopter into the bottle cap. Make runners from the two remaining parts of the tubes, connect with a strip cut from an unnecessary part of the bottle with a stapler.

Attach the main part of the helicopter with runners also with a stapler. Insert a ping-pong ball into the hole.

The helicopter is ready. A minimum of time is spent on it, and the child will have a lot of pleasure from a toy created by his own hands.

Matryoshka

Matryoshka is probably the only toy with which more than one generation has grown up. In addition, it is considered a symbol of Russia. Many foreign tourists, coming to our state as souvenirs, buy them. Is it possible to create such a complex figure with your own hands, and even from waste plastic? Yes, you can, even if it is not as functional as the modern ones in toy stores, but it will be personal and, for sure, the most beloved.

In the creation of such crafts, not only plastic food containers are suitable, we will consider this a little later. The toys that you see in the photo below are made only from the tops of the flasks. This will make them more stable. So that the edges are not too sharp, they can be treated with electrical tape.

In this photo, the top has been inserted into the bottom, the middle has been removed altogether. This nesting doll has a more respectable look, looks more natural and believable. Painted with acrylics. Children will not be able to do it in the same design, but there are many stickers and patterns of a similar image on the Internet. As a last resort, they have a lot of options to learn and draw on such a matryoshka model.

The next photo and the model itself can be attributed to multifunctional. There is a matryoshka in its own design and a pencil case for storing pencils and pens. As you can see, it is not made from a food bottle, and their containers from shampoo or cream.

Approximate drawings and diagrams for creating nesting dolls from plastic containers in kindergartens and at home.

Bottle cut diagram

Hand made - popular in any form, whether it is a gift to friends or joint creativity with a child. Bottles of water, soda, milk, and juices are a great base for making crafts. The material is easy to process, durable, not afraid of precipitation, which is why folk craftsmen and eminent designers love it so much.

It is easy to be convinced of this by looking at the photo of crafts from plastic bottles. The ideas realized on them are easy to repeat yourself, or they will become the starting point for creating new masterpieces in the interior or garden.

What to cook for work

An important plus of hand-made objects is that any material available on the farm is used for crafts. Plastic containers for drinks are a universal "raw material".

The following are used:

whole bottles of any size, including cans;
separate necks or curly bottoms:
main smooth part;
cover.

The advantage of the material is the ease of processing. Blanks can be:

pierce with a knife, awl, clamp needle
heat so that the plastic takes the desired shape and hardens
cut with scissors, clerical knife

For decoration, depending on the idea, you will need paints, leftover threads, scraps of fabric, natural material (cones, twigs), artificial flowers, leaves. There is a use for old children's toys, broken garden tools, ribbons, foam rubber, wrapping paper.

It is easy to find schemes for crafts from plastic bottles on the Internet, but if you lay out the existing bottles and various junk material in front of you, ideas will arise by themselves.

Big possibilities of a small bottle

No complicated tools or special skills required. But as a result, you can get:

real beasts and fictional animals;
organizers for storing small items, stationery, garden supplies;
figurines of people, animated characters, fairy-tale heroes;
flowers and various floristic compositions;
pots and flowerpots for indoor and outdoor plants;
bird feeders;
decor details for interior or landscape design.

Original bottle craft ideas do not necessarily involve cutting the container. As a result of simple manipulations with loosened soil and multi-colored paint, you can build:

a low curly hedge or frame for flower beds,
flat silhouette of a flower, insect, animal;
smiley.

In this case, the bottles are simply sunk into the ground to the desired depth, and the protruding parts are tinted in the selected color.

A beautiful garden without much hassle

It will not be difficult to buy a garden figurine of any subject in the store. The same goes for flowerpots, decor for a recreation area or a flower garden. But similar do-it-yourself things look no less impressive. Crafts from plastic bottles for the garden and vegetable garden can be done in winter, so that at the beginning of the season they can be installed in places of honor in the country.

Artificial reservoir

Bottles with a volume of 1.5 liters are colored blue for 1/3 of the length, starting from the bottom. Then they are pressed into the loose earth close to each other. You don't need to create perfectly straight lines. Let the artificial lake have an irregular shape.

Along the edges it can be overlaid with large stones, and figures of waterfowl or water lilies can be set “on the water”. Plants, by the way, can also be made from plastic containers.

Locomotive

The shape of the 5-liter drinking water cans resembles train carriages. You will need whole bottles with a neck and soft plastic lids for homemade preparations. In the caps and sides of the bottles, two protocols are made from the bottom of the canister. The holes are located closer to the beginning and end of the workpiece on both sides. Then, with the help of flexible wire, the "wheels" are attached to the locomotive and the wagons. Now the composition can be painted.

The neck of a soda bottle is like a pipe, it can be inserted into a hole on the nose of a "locomotive". If you cut rectangular holes on top of the carriages along the perimeter of the bottle, fill it with soil, then the train turns into pots for climbing and low plants.

Hares, pigs, and elephants

Cut off the top of a large round canister - and you get the body of an animal on which even an inept artist will depict the face and legs. From another bottle, you can cut out long and thin ears, insert them into the slots closer to the edge of the bottle. You will get a recognizable bunny.

The ears are rounded and small in size - for a bear cub, huge and wide ears - are suitable for an elephant. If you place the canister horizontally, leaving the spout with a lid, then small sharp ears and pink color will help turn the bottle into a perky pig. The crochet tail is obtained from a small bottle cut in a circle.

Excellent crafts are created from plastic containers cut to the desired height. If you make holes on the sides and insert a wire or twine as a handle, you get a convenient basket for picking berries.

It can be painted, pasted over (tied) with colored ribbons or twine, artificial flowers can be added. You can decorate the cupboard with an old lace napkin or create a coffee bean pattern.

1000 ideas for 1000 things

A detailed description of bottle crafts for novice designers can be continued with such necessary organizers in any home.

Proponents of minimalism will appreciate the prefabricated composition of cut-necked bottles of various heights and volumes. They can be fastened together with a wire, stretching it in the puncture points and twisted tightly into a flagellum inside the containers. Multi-colored caps, beads, fabric or self-adhesive paper appliqués will help to close the attachment points.

Hanging organizers are indispensable in the bathroom, home workshop, garage, in the corner of the needlewoman. You can make a rigid attachment by cutting a hook or loop from part of the bottle so that they are one piece. Or choose the option with a rope or wire fastening according to the principle of a bow at a bucket.

Curly baskets. Soft plastic is easy to arrange in the form of a basket. Then it can store, for example, cosmetics. It is appropriate to make a box for spices in the kitchen, and if thick foam rubber is laid on the bottom of the box, then rings and stud earrings will look original in it. The edges of such baskets can be wavy, smooth, jagged.

Another filling idea is a floral sponge. You can fix artificial buds in it or create a composition of fresh flowers.

And can apple trees bloom on Mars?

A master class on crafts from plastic bottles will be incomplete if you bypass the plants created from them. An exotic palm tree can easily grow in a house or garden, even if you live in central Russia.

For flower arrangements, you can do:

Inflorescences from curly bottoms. It is enough to paint them with bright colors and install them on a rigid "stem" of wire. Leaves can be made from green bottles.

Exotic buds. From the soft plastic center, you need to cut four-pointed holly blanks of different sizes. They can be combined in pairs, combining parts of different shades, but from the same color scheme. Each detail needs to be slightly displaced relative to each other, to create volume by bending the petals to the center or to the bottom of the bud.

Composite flowers. Round petals are prepared in advance and melted slightly over a candle flame. Through the holes made at the bottom of the petals, a bud is assembled on a flexible wire.

Garlands. The easiest way to collect them is from multi-colored bottoms from bottles with a volume of 0.5 to 1.5 liters. You can string the buds horizontally or create vertically flowering vines. They can block the entrance to the gazebo or hang from the trees in the garden.

Leaves are cut small and rounded, tall and thin like sedges, or with gentle curves like in nature. The last option is easily obtained from strips cut by a wave, slightly scorched over a candle fire.

Idea bonus

Before getting enthusiastically engaged in creativity, you can familiarize yourself with a small kaleidoscope of ideas available for implementation:

mosaic on the garden path or the wall of the gazebo made of plastic covers;
a corrugated pipe or hose from an old vacuum cleaner as the trunk of an elephant, the neck of birds, a giraffe, the legs of animals (a rigid wire frame is inserted inside to give the necessary bends);
bottoms of multi-colored bottles instead of mini-shades for garlands;
cans for rinses and other detergents to create bizarre figures, funny faces;
a bottle as a sprinkler (pierced with a thin needle and put on a garden hose) or an automatic watering container.

It's not hard to make sure that a plastic bottle is an inexhaustible source of ideas for creating useful little things. For additional instructions on how to make a DIY craft, see our video.

Create, please others and enjoy the process of creation yourself. Remember that giving bottles and cans a second life makes the world cleaner and brighter!

Photo of crafts from plastic bottles

Plastic bottles are usually considered garbage and sent to the appropriate places - garbage cans and landfills. But in the right, creative hands, these things can sparkle with new colors. And you don't have to be a master to breathe a second life into ordinary plastic. You just need to have a little patience and imagination.

Crafts are quite simple and everyone can do such things with their own hands. And maybe for someone this business will become a real hobby.

Useful garbage items

Plastic bottles come in different shapes. They are also different in color and size. Therefore, it is quite possible to make small decor items from them for a garden plot. And for a summer residence, plastic furniture or even a summer gazebo, built from the same plastic dishes, is quite suitable.

And even caps from plastic bottles in skilled hands can turn into real masterpieces - mosaics on the walls, a hot stand, cute toys for a child and other useful little things.

Everyone can make this or that little thing. It is fantasy that plays the main role here. After all, the material itself for making crafts is almost everywhere. They can be found in the park, on lawns, near the river, and in landfills.

And by collecting them for his creativity, a person thereby cleans nature from harmful things. After all, plastic today has turned into a real disaster that threatens the environment. This material is durable, so the constructed crafts from plastic bottles will serve and delight for a long time.

Where to begin

In every decision, the main thing is an action plan. In order to start working on a craft, you need the following:

a detailed description and photo of crafts from plastic bottles or one separate craft to choose from;
bottles of suitable sizes and colors;
additional materials and tools that may come in handy: knife, scissors, tape, glue, paint, fabrics, etc.

Then you just need to be patient and follow the instructions. And soon the children will rejoice at the new fabulous playground, guests will be happy to spend time in the "almost crystal" gazebo, and the hostess will appreciate the unusual practical devices in the kitchen.

Boxes

You can make an excellent box from plastic bottles, in which it will be convenient to store various little things: hair ties, buttons, paper clips. To do this, you will need two lower pieces of plastic bottles of the same size. They are connected together with a zipper, which is sewn along the edges.

Or the simpler option is to cut off the top of the bottle at the point where it begins to taper. The container is ready. It remains to decorate the bottle with a decorative ribbon, buttons and beads. They are glued with glue. Sew a cap from the fabric, which is tightened with a cord and also glue it to the edge of the container.

And it is not at all difficult to make a convenient and original container for sandwiches, which you will not be ashamed to take to school or to work. The main thing is to decorate it with a plan. And it is done in just a few steps.

The bathroom also has a place for a plastic box, in which you can put all the necessary accessories: toothpastes and brushes, washcloths and shampoos. If these boxes are hung on the wall one above the other, then you can free up space.

Plastic bottles can make an unusual holder for pencils and pens. It is enough to cut it out in a circle in the shape of a cat's or an owl's face and paint it. A flower vase is made using the same technique. Only for its stability, a handful of small stones should be poured onto the bottom.

Playground toys and decorations

To decorate playgrounds, they make decorations in the form of plants, animals and even insects.

For a palm tree, you need about 15 brown bottles, from which the trunk of a palm tree is made, and 7-10 green bottles for leaves. The barrel is assembled from bottles cut across, stringing them onto a frame made of a strong rod.

To create the leaves, the green bottles need to be cut lengthwise to form the desired shape. To make longer leaves, you need to attach an additional one to the main sheet with a stapler.

You can decorate your garden area even in winter. Funny penguins in colorful hats and scarves will cheer you up on a cold winter day. You can make penguins of different sizes. For one bird you need two identical bottles, which have a "waist" at the bottom.

This bottle needs to be cut in half. This will be the body of the penguin. Only the bottom of the second bottle needs to be cut off with a small margin - these are the legs. Connect the two parts with a glue gun, paint. Make a pompom from wool and a scarf from a strip of fabric.

Such crafts are not stable, since plastic is a very light material. In order for the penguins to stand calmly in the chosen place, before gluing the parts, they need to be filled with sand or small pebbles should be placed.

Even plastic lids in skillful hands turn into cute ladybugs. You just have to paint them accordingly and glue funny eyes.

If the plastic lids are connected to each other with the edges in the form of a small circle, then you get an original stand for a hot pot or kettle. Such a device is useful in the kitchen.

Flowers and plastic bottles

Flower beds can also be decorated in an original way with the help of plastic bottles. If you take the lower parts of the bottles, paint them in different colors and stick them in the ground next to each other, you can create a flower bed that will “bloom” all year round.

Bottle tops with caps can also be used as flower pots. They are not stable, but in the form of flower pots they will look fabulous.

From plastic bottles with a volume of 3-5 liters, you will get a bright flower bed-train. In each bottle, you need to cut one side part. Paint in different colors. Fill the bottles with earth, transplant undersized garden flowers into them. Lay them horizontally and lean against each other, creating trailers.

Furniture and buildings

The construction of a summer gazebo will require more costs and efforts. Indeed, for construction, you will first need to make a frame of wood or metal. The walls are built from whole bottles, which are strung on a wire or rod.

Previously, a hole is made in the bottom of the bottle, the cap is unscrewed. A rod with threaded bottles is attached to the frame in a horizontal or vertical position.

With the help of bottles, you can create a sofa, armchair, ottoman. Here you first need to make separate blocks: seat, armrests, back. Then connect them according to the design. Blocks are best made from identical 2 liter bottles.

On the upper part of the bottle (where the cap is), you need to put on the lower part of the other bottle so that the bottom of the bottle turns out on both sides. All bottles, blocks are attached to each other with adhesive tape. To make the seat soft, you need a foam block of a suitable size. Sew a cover according to the size of the furniture.

Photo of crafts from plastic bottles

Plastic bottles have appeared for a long time and, in addition to their direct purpose, are used for a variety of purposes. Due to their durability, bottles are widely used in the country, where they make crafts, vases, furniture and even greenhouses from them. Imagination is not limited by anything - after all, the sizes and shapes of bottles are varied, they bend and cut easily. Bright plastic figures will decorate the summer cottage and reduce the amount of garbage.

General principles of working with plastic bottles

If you want to decorate the dacha with crafts from plastic bottles, you need to collect a lot of them: you will need both ordinary ones from under water or lemonade, and more dense ones from under shampoo or dishwashing liquid. You can take large five-liter and small half-liter bottles - everything will go to work.

Instead of throwing plastic bottles in the trash, you can use them to decorate your summer cottage.

First, the plastic must be thoroughly washed with soap or dish soap. It is good to do this by soaking the containers in a large basin of hot (60–70 ° C) water and then rinsing them out with a high pressure hose.

To cut out any details, you will need sharp, strong scissors or a knife. To decorate the bottles, you will need waterproof quick-drying paints:

To make the paint fit well on plastic, you can use:

a nylon brush (streaks from hairs may remain, you need to paint at least two layers);
with a foam sponge (with dabbing movements, also cover in two layers).

Plastic bottles from spray paint cans are best painted over.

Decorating a playground with crafts from plastic bottles

If the garden plot is large and it is possible to organize a playground on it, plastic animals, birds and fairy-tale characters will perfectly fit into its design, because the figures will be bright and durable. Sly cats will chase nimble mice, gnomes will look after the plantings, a red fox will settle next to a cowardly hare, and an elephant will live near a fence with bright sunflowers. Bees, unlike real ones, will not sting, and a bull will butt. It will be fun and interesting for children on the playground with such figures.

Photo gallery: figures from plastic bottles for the playground

To make funny gnomes, you will need not only bottles Children will not sit in such a train, but they will be able to ride toys Cute cats from bottles will decorate any playground Bottle mice are well suited for small flowers or greenery
For crafts, you can also use thick bottles of detergents A touching baby elephant with a flower in its trunk looks beautiful against a background of sunflowers The frog princess and her friend frog comfortably sit among the green grass With the help of gray, black and white paint, funny hare and mouse are obtained. can be planted in a flower garden A bull from a plastic bottle is not at all scary If you apply a little imagination, exotic penguins will settle in an ordinary summer cottage Children will be interested in the playground with the characters of their favorite cartoons

How to make a bee from a plastic bottle

It's no secret that children are often afraid of flying and buzzing insects, although in most cases bees, beetles, wasps fly about their business and do not bother anyone. In addition, they bring considerable benefit to the garden, pollinating trees and shrubs. To make small summer residents less afraid of bees, you can make them from plastic bottles. The smallest are suitable, from 300 ml to 0.5 liters. Procedure:

Pour yellow paint into a clean bottle (about a third).
After pouring paint into the bottle, you need to carefully screw the cap and shake
Tighten the cap carefully, shake it and turn it over until the paint covers the entire bottle (if it doesn’t work, you can add more paint).
Stick black thin tape on the strips of the bottle (several rows).
For the strips, use thin black tape
Cut out two wings from a clean bottle and bend the tips with corners in the place with which the wing will be attached to the bee.
To make the wings even, it is better to use a stencil.
Insert the fenders into the slots on the back.
To keep the bee's wings well, you need to bend the corners at the tips
Draw a muzzle on the lid with a thin brush and paint or varnish.
The bee's muzzle must also be painted with indelible paint.

Decorating a recreation area with plastic bottles

Gardeners are hardworking people, but sometimes they also want to rest. Relaxation corners are usually designed with great care: you want it to be nice and cozy. Crafts from plastic bottles can be used as elements of landscape design. In the relaxation zone, you can place unusual animals and birds, artificial flowers and palms, colorful flower beds and even a plastic house.

Photo gallery: crafts from plastic bottles for a rest corner in the country

It is not difficult to make such a hedgehog, you just need to cover an old bottle with a net and fill it with earth. , it will take a lot of time Simple but bright vases from bottles can be put on the porch or veranda Inedible, but very bright fly agarics attract attention With the help of red and black paint, you can lay out a bright flower bed of plastic bottles In our area, palm trees do not grow, but why not arrange imagine an island paradise with the help of skillful hands?

How to make a bird from plastic bottles: ideas and instructions

To decorate the recreation area, you can make very beautiful fairy birds: a swan, a peacock, a firebird or a flamingo. The basis for all birds is the same, only the color of the feathers and the shape of the head and tail are different.

Photo gallery: birds from plastic bottles

A cheerful cockerel, of course, will not wake you up in the morning, but will create an excellent mood for the whole day Romantic swans in the pond are a real masterpiece of plastic art Hunting lovers will surely like capercaillie Pink flamingo looks very bright in the middle of green grass

To make birds, you will need bottles of different sizes: large five-liter and one-liter bottles, as well as wire, corrugated pipes, metal-plastic pipes or rods for legs. It is important to thoroughly wash, degrease and paint all the parts before starting the assembly of the poultry, since this cannot be done in finished form. Procedure:

Photo gallery: feather options for decorating a bird from a plastic bottle

It will take a lot of time to cut such feathers for a swan from a plastic bottle. For a chic peacock tail, feathers are superimposed on each other. plastic bird more similar to the original

Video: a swan from a plastic bottle

Plastic flowers are not a replacement, but an addition to real ones

In the resting corner, both real and artificial flowers will look harmonious. They will last a long time and save money on the arrangement of the suburban area.

Making chamomile from plastic bottles: master class

One of the most popular flowers in Russia - chamomile - is easy to make from white plastic bottles and wire. Procedure:

Cut the bottle into two parts: straight and tapered.
Cut another two or three bottles into two parts and cut off the necks.
For the middle of the chamomile, use a yellow or orange lid.
Pass a wire through the bottom of the chamomile, securing it through the lid.
You can cut the petals out of a green bottle and attach them to the wire stem with a thin wire or lighter (if you heat the plastic leaves, they will stick firmly to the stem).

Video: chamomile from a plastic bottle

Among the plastic flowers, there are guests from hot countries, for example, a lotus, and the usual lilies of the valley, as well as bright tulips, multi-colored asters and fabulous flowers that do not have "prototypes" among the real ones.

Photo gallery: flowers from plastic bottles

Until real tulips have blossomed, you can decorate the flower bed with plastic ones - you cannot distinguish them in a few steps From milk or kefir bottles you can make a lily of the valley Bright sunflowers will create a sunny mood on the site Red and white bells are in harmony with the brick wall of the house
Plastic lotuses in a vase will serve as a wonderful decoration for a summer cottage

Bright crafts from plastic bottles are not only decoration. They help to brighten up leisure in the country, save the family budget, unite the whole family for creative work and reduce the amount of waste.