How to descale an electric kettle? How to descale in a teapot: ready-made solutions and the correct proportions of folk remedies Means for descaling a teapot.

Have you ever explored tap water? If not, then we can only assume what is contained in it, except for "al-two-o." Some substances are easy to detect even without careful analysis - these are salts of magnesium and calcium metals. The water in which they are contained is called hard.

Take a peek inside your kettle. If you see a persistent grayish coating (scale) - it means that the water in your water supply is hard.

Hardness of water

There are many ways to get rid of water hardness. You can use chemicals or filters, but the easiest way is to boil water. In this case, soluble bicarbonates will pass into insoluble carbonates and precipitate in the form of scale on the walls of the dishes.

Immediately note that you can not use hard sponges or knives, this can damage the dishes. Knowing that the walls are just a chemical compound, try to act on it by chemical means.

The kettle can be descaled using inorganic and organic acids. Have you ever repaid soda with vinegar? Something similar happens with scale when acids are added. Use vinegar to get started. Moreover, he is in the arsenal of any housewife.

Take vinegar

People met vinegar a long time ago, when the first barrel of wine from an unlucky winemaker turned sour. But it is unlikely that people thought that this spoiled wine would be a rather valuable tool in the household.

For cleaning, take at least 9% vinegar. 150 g of substance should be dissolved in one liter of water. Better yet, use a more concentrated solution - vinegar essence. It can take one (maximum two) tablespoon. Pour the solution into the kettle (up to half the volume) and boil. Boil for at least half an hour.

During the cleaning process in the kitchen, there will be a persistent smell of vinegar. Therefore, it is advisable to open a window or at least a window, and remove children and asthmatics to another room. After the procedure, the kitchen should be well ventilated.

If the raid is large, it cannot be removed immediately. In this case, the purification can be repeated. At the very end, rinse the dishes thoroughly to get rid of the persistent smell of vinegar.

With the help of vinegar, an electric kettle can also be cleaned of scale. It is necessary to pour clean water into it and dissolve the required amount of the agent in it.

The peculiarity of cleaning an electric kettle is that continuous boiling for a certain time is impossible.

Proceed as follows: wait until the electric kettle automatically turns off, then wait a bit and turn it on again. Repeat several times. After the procedure, boil the kettle with the addition of detergents, and then with clean water.

Lemon Cleansing

The descaling kettle is not difficult to clean with citric acid. You can buy it at the grocery store. The advantage of this tool is the absence of a pungent odor and absolute harmlessness. Despite the fact that it is a weak organic acid, it is able to dissolve hardness salts.

The entire cleaning procedure consists of 6 stages:

Buy 1-2 packs of citric acid weighing 25 or 20 g.
Pour two-thirds of the volume of cold water into the kettle and pour one bag of citric acid into it.
Boil water for about 5 minutes.
Check the quality of cleaning. To do this, remove the kettle from the fire and carefully stir up water in it. Flakes in water indicate the effectiveness of the procedure.
After cleaning, drain the dirty solution and rinse the kettle under running water.
Boil the kettle with clean water twice.

If there is not a lot of scale in the kettle, the cleaning procedure can be carried out without boiling. Dissolve citric acid in water, pour into a kettle, wait about 5 hours. Then proceed as in the previous case.

Soda will help

Now we’ll tell you how to use lime soda to clean the kettle from scale. First, pour clean tap water into the kettle. Then dissolve the soda - a tablespoon with a slide - and boil.

Wait about 20 minutes, then drain the solution and refill the kettle. Then you need to add one tablespoon of citric acid and boil. Pour out dirty water and clean the kettle with a soft sponge.

Citric acid can be replaced with vinegar. To clean, boil water and immediately add 3 tablespoons of soda to it. After a half-hour exposure, boil the solution again and pour from the kettle. Then fill it with hot water with vinegar essence (2 tbsp. Tablespoons).

Bring the solution to a boil, wait half an hour and pour. As in the previous version, clean the remaining loose coating with a sponge. Such cleaning can be carried out for dummies of any kind.

Baking soda loosens scale, and citric or acetic acids dissolve it. Using soda for cleaning is very beneficial because it is cheap, affordable and completely harmless.

Coca-Cola Anti-scale

Why Coca-Cola? It contains inorganic phosphoric acid, which is added to the drink to improve taste. And the effect of orthophosphoric acid on carbonates is similar to the effect of acetic and citric acid.

Of course, the concentration of acid in Coca-Cola is low. Therefore, with a thick layer of scale, it will not help. But with a slight touch will like it. Moreover, this is the safest way to clear the kettle from scale.

Pour the drink into the kettle to half the volume. Wait until gas bubbles come out. After this, boil the water and let stand for half an hour. Then drain the solution from the kettle and rinse with clean water.

To keep your kettle in perfect condition, descale it every month. With a small layer of contamination, the cleaning procedure can be carried out without heating. In advanced cases, use industrial descaling agents. And do not forget to rinse the dishes well with tap water after any cleaning.

All my greetings. Every housewife wants to have a clean kettle that pleases with a pleasant tea party. But scum is often deposited on its walls. Today we learn how to clean the kettle from scale.

What is the danger of scum and why you need to get rid of it

Limescale is dangerous because penetrating into our body, it harms it, although we may not notice it right away. Scale in a teapot is salts, harmful impurities and insoluble metals.

If for many years they enter the body, then a person may develop osteochondrosis, gout, kidney stones and other adversities. Even if you pass water through a filter, the salts still remain. The best boiling water is spring water or from bottles.

Cleansing Methods

Plaque on the walls of the kettle can be cleaned. Many housewives try to buy the most expensive products in the store, even realizing that they cause great harm to their health. Isn't it better to find such methods that at home will make any dishes shine?

Cleaning does not take much time. It is enough to clean the dishes once a month so that the plaque recedes for a long time. With very hard water, this will have to be done twice a month. If the layer is small, then the easiest way is clarification with citric acid:

Fill the kettle with cold water, 2/3 of the volume.
Pour 1 tbsp. l acid per 1 liter.
Boil for 5 minutes.
Wait until it cools, then drain the water.
If the coating does not disappear, repeat again.

But citric acid is only suitable for electrical products, as well as stainless steel or glass. Coating enameled and metal products may deteriorate.

For simple and electric kettles stainless steel or glass lemon peeling is suitable. Lemon will be able to remove plaque of any thickness:

Cut the lemon into small slices, put in a container.
Pour water 2/3 of the container, put on fire.
After boiling, reduce the heat.
Boil the lemon for 30 minutes, then let it cool.
Drain the water, remove the remaining layers with a soft sponge.

Metal kettle can be cleaned with vinegar, but it’s better not to touch the electric one:

Pour in water as well.
Pour vinegar - 0.5 cups per 1 liter of water (essences - 3 teaspoons per 1 liter of water).
Boil, let it brew for 1 hour, then drain.
Before boiling water for tea, boil and drain twice to remove the smell of vinegar.

This method will quickly and efficiently remove any layer, but you need to rub it with a sponge, achieving the perfect shine.

From cleaning with vinegar, an unpleasant odor will spread throughout the room. Do not forget to open the window or turn on the hood.

A delicious drink will help in the household: Coca-Cola from scale

This is a Coca-Cola drink that contains the acid we need. To clean Coca-Cola, you need to take so much liquid so that it covers the bottom with a sufficiently large layer. Then boil and leave for 1 hour so that the acid corrodes the precipitate. After this procedure, wipe the bottom and walls with a sponge. Sprite and Pepsi will do.

If the kettle has been in a neglected state for a long time, then you need to do this procedure 2-3 times. This drink is well cleaned electrical appliance.

Almighty soda

Where only soda is not used! It treats and bakes more fluffy and tasty. For washing scale, it is also useful to us. This powder can be washed both electric and enameled vessel.

The advantages of cleaning with soda include its cheapness and safety. There are also disadvantages. Soda can scratch the surface of the product.

The procedure:

Pour water to half the tank.
Pour 2 tbsp. soda.
Boil for half an hour, let cool.
Wash the inside with a sponge.

Vinegar and soda. With these ingredients you can bring enamel and metal kettle to a shine, it is better not to touch an electric kettle.

First boil water with soda for 25-30 minutes, 1 tbsp. l on 1 liter of water.
Pour out liquid, fill in a new one.
Pour 0.5 cups of vinegar into 1 liter. water, boil again for 30 minutes.
Wipe inside with a sponge to remove any loose deposits.

Method for all types of dishes, except electric. Soda, vinegar and citric acid will help get rid of old scum. You will have to boil the dishes three times, first with soda, then with citric acid, then with vinegar. Proportions, as stated above.

Cleanup - to the point!

Hard salts will help clean apple or potato peels. It turns out that they also have acids that can cope with plaque. You can put potato, apple and pear peeling together.

If inside the new dishes you notice deposits of salts, then put cleanings in it, fill with water, put on fire for half an hour. But this remedy will not help against thick scale.

For all types of tea utensils, you can use pickle pickles where there is vinegar or citric acid. Just fill the container with brine, keep it on fire for 30 minutes. Here is a simple method used by our grandmothers.

A glass teapot will cleanse the juice of lemon and soda well. Pour in water, pour in 2 tbsp. lemon juice and 2 tbsp. l soda, boil for 15 minutes. Pour out the water, wipe inside with a soft sponge. Instead of juice, citric acid is suitable.

The best remedies for cleaning a thermos kettle

Thermos Kettle will take more electricity if it is not periodically removed from scale. In addition, you will feel a brackish smack of water, the device will make a lot of noise during operation. If you neglect cleaning, the device may simply burn out.

Soda and citric acid will help best.

First, pour 1 tbsp. soda, boil, wait for the liquid to cool.
Drain the solution, fill with new water.
Put 1 bag of citric acid, boil again, leave to cool, then drain the solution.
Pour in clean water, bring to a boil, then pour. The appliance is now ready for use.

Can be cleaned with vinegar essence. Take 1 liter. water 50 ml of essence, bring to a boil, leave to cool. A good method is clarification with a colorless Sprite, as described above.

Ceramic appliance can also be cleaned with the means described above.

Simple ascorbic acid will also help to achieve a shine inside the dishes. For 1 liter of water, 1 tbsp is enough. l ascorbines. This is a safe but effective method, especially if the inside is very dirty.

With a little pollution, you can just pour soda into the water and hold for several hours. After each cleaning, the first boiled water must be poured out to remove the remaining lime. This applies to all types of tea utensils.

Plastic kettle best cleaned with ascorbic acid and soda. The technique is described above.
Using citric acid, try to bring the aluminum appliance to a shine. Pour water, pour 1 tbsp. citric acid, bring to a boil, let cool.

External surface cleaning

Stainless steel utensils can easily be brought to shine from the outside, if you use folk remedies.

The simplest way is toothpaste.

Take an old toothbrush that has lost stiffness.
Squeeze the toothpaste onto it.
Wipe the entire surface of the appliance.
Rinse first with warm, then cold water.
Dry with a towel.
Pour water into the kettle, warm it up a bit, polish the warm appliance with a soft towel.

If the contamination is large, squeeze the toothpaste onto the hard side of the sponge and gently rub the surface. Do not press hard so as not to leave scratches. With scratches, dishes will become more dirty and more difficult to clean. If the kettle is burnt on the stove, then most likely it will have to be thrown away.

Another way to achieve brilliance is to boil for 30 minutes in water, where to add salt and soda - 1 liter for 1 tbsp. spoon. It is important that the kettle is completely immersed in water. Then wipe it with a soft sponge.

Another way:

Pour 3 tbsp into heated water. tablespoons of baking soda and;
Dip the dishes in the solution;
Boil for 5 minutes, leave to cool;
Rinse with water, polish with a towel.

It is better not to bring the stainless steel appliance to contamination. After each boiling water, polish it. If there is no time for cleaning procedures, it is better not to buy such dishes.

Enameled kettle can be cleaned with ordinary soda, but do not rub hard so that there are no scratches. Simple soap is the best remedy. Soap the sponge with soap and a good walk on the surface, then rinse with warm water. If you do not start the dishes, then this method will not let your dishes become very dirty.

The aluminum kettle can be cleaned with. Pound into powder 15 tablets of coal, moisten the walls of the container, apply the powder, hold for 1 hour, then rinse with water, dry with a towel.

Descaling detergents

In stores, you can find enough detergents to help clean any kettle from the outside. The main thing is that they do not fall into the dishes.

When working with detergents, it is better to wear gloves, do not touch the eyes.

Dear friends, you have learned many ways to clean dishes, use them and drink clean delicious tea!

Scale (salt sediment) disrupts the functioning of the appliance, and white and red flakes fall into the cup along with boiled water. At first, this layer is just a white coating, then it turns into stone, which is difficult to remove. I will describe effective ways to descale a kettle at home.

Warn household members that they must not be used temporarily.
Fill up to the middle of the tank.
Add the active substance.
Turn on the appliance.
Wait at least half an hour.
Wash the inside thoroughly.

To remove the old fossilized plaque, use several methods at once or try again.

Traditional effective methods

It is easiest to clean an appliance at home using improvised means:

Soda -softens salt deposits.
Acids -dissolve even petrified scale.
Brush and sponge - Do not damage the surface of the walls of the kettle, as their metal counterparts.

So, the main fighters with sediment are soda and citric acid.

Method 1: Soda Brush

Baking soda or soda ash will help restore purity to any electrical appliance (plastic, metal, ceramic). There are 3 ways to clear the kettle of soda lime:

Picture	Description
	Method 1 - with soda ash Recipe for multilayer scale: Fill the dishes with water. Pour the powder at the rate of 1 tablespoon per 1 liter. Boil and let cool. Wash the kettle to remove any residue.
	Method 2 - with baking soda and vinegar Recipe for a small layer of salts: Free the kettle from water. Prepare containers for vinegar and soda. Here the soda from the scale in the kettle works in conjunction with vinegar. Wear rubber gloves. Soak a sponge in vinegar, and then dip in powder. Do it yourself in the inside of the appliance. Flush the appliance. Vinegar and soda when combined give a salt-damaging reaction.
	Method 3 - a powerful complexof soda ash and citric acid Dissolve in a liter of water 1 tbsp. teaspoon of soda and 1 teaspoon of citric acid. Pour the resulting solution into the device. Next - boil and leave to cool. Remove loose residues with a brush. Wash the appliance thoroughly. This method is not for plastic. Long-term contact with acid and alkali will destroy it. An aluminum kettle may also suffer.

Method 2: the use of acids

Any old deposits will easily remove acids:

Acid	Application
	Vinegar For cleaning metal, ceramic and glass electric kettles: Prepare a solution: ½ cup vinegar per 1 liter of water. Bring the solution to a boil.. Leave for an hour for loosening the sediment. Wipe the device with a spongeremoving the remaining salt layer. Wash thoroughly. The disadvantage of this method is the unpleasant smell in the kitchen from vinegar. Ventilate.
	2 types of citric acid are used: powder and lemon. Cleaning Instructions: Dissolve a teaspoon of powder in 500 ml of water or cut sour fruit into 4 parts. Turn on the kettle. The next half hour is the cooling and softening time of the plaque. Clean up the leftovers sponge. Rinse. The bonus of the method is a refreshing lemon scent.
	Descaling the kettle with oxalic acid: Pour the powder into the appliance., about half a glass. After 10 minutes, fill it with water. Boil. Wash thoroughly plenty of water. With a slight plaque, you can use fresh sorrel: boil a few leaves.
	Lemonade contains phosphoric and citric acidseliminating sediment: Shake carbonated drink. Pour into the kettle. Turn ondevice. Leave to cool.
	Organic Acid Peel an electric kettle will remove scale from an apple: Peel an apple from the peel. Fold cleaning into the appliance. Pour water and boil. Leave overnight. Use such a safe natural remedy once a week for prevention.

Method 3: Combined (for thick scale)

After such a powerful attack, all the scum will come off. This is a two step cleansing:

Step 1: remove soda and acid. Pour a little soda in the saucer, add any acid from the table. Treat the entire surface with a coating of resulting slurry. Rinse after 10 minutes.

Step 2: remove scale and odors. Cut the lemon into slices and place in the electric kettle. Boil water with lemon and leave for half an hour. Wash the appliance from loose residues.

A variety of household chemicals from scale

In addition to folk methods, you can clean an electric kettle with the help of chemical agents specially developed for this purpose.

Their main components:

Organic and Mineral Acids (lemon, sulfamic, adipic).
Sodium Tripolyphosphate - The main product from the processing of phosphoric acid in expensive products.
Soda.

These tools also solve the problem of how to clear the enameled kettle from scale. Available in liquid, powder or tablet form. Use strictly according to the instructions so as not to spoil the equipment.

The general scheme of how to get rid of scale special cleaners:

Prepare a solution.
Boil in the kettle.
Then pour.
Descale. Softened, it is easily removable.
Boil clean water 2-3 times to wash the remaining chemicals.

Output

We found that the choice of methods for descaling in an electric kettle is quite large. Home remedies are not inferior in effectiveness to industrial ones, verified! Check out the video in this article, and you can ask questions in the comments.

Even if you use filtered or bottled water, pouring it into a kettle with a cleaning system, sooner or later you will have to deal with such a problem as scale in a kettle. In this article we have put together the most effective ways to deal with it, the fastest and most harmless to technology.

What is scale and why must it be removed?

Sometimes on the Internet you can come across the opinion that it is not necessary to remove scale - it carries a purely visual defect, which plays a role only in glass teapots. Such a statement is fundamentally false.

First of all, you need to understand how the scum appears. Most often, ordinary running water is used for boiling, which contains a lot of impurities. However, they are in both bottled and filtered water - however, in smaller quantities.

Most of them are various salts, which, when heated, are separated into carbon dioxide and solid sodium precipitate, which remains on the walls of the dishes. However, it is not washed off with ordinary water and has the ability to accumulate.

The problem of scale is not only in an unaesthetic appearance

Such a plaque harms your teapot: it impairs thermal conductivity, which means that you will have to spend more time on heating. Because of this, in ordinary kettles, the layer of ceramic coating is gradually thinning, if any, and in electric kettles, heating elements quickly fail.

However, this factor can be considered rather secondary. The main reason you should fight limescale is potential health damage. Since plaque consists of sediments of salt, insoluble metals and various harmful impurities, including chlorine, the sediment entering the body can contribute to the development of various diseases. The mixture can cause arthritis, gout, osteochondrosis, kidney stones, or toxicological poisoning.

That is why you need to clean the kettle from plaque regularly. In the following sections, we will talk about how to do it right.

How often do I need to clean the kettle from scale?

The answer to this question depends on two factors - the type of heater and the quality of the water you use.

Glass teapots need to be cleaned almost every week: any coating, even the thinnest, is visible on a transparent surface. But metal or ceramic can be cleaned of plaque about once a month - as it gets dirty.

In addition, kettles with an open heating coil need to be cleaned more than those in which the heating element is closed. Otherwise, the device will fail faster.

As for water quality, then see for yourself. Bottled or well-filtered water pollutes the kettle less, however, it is not a panacea - only distilled water gives absolutely no sediment, but we do not recommend drinking it to anyone - this is too bad for your health.

The quality of tap water depends on the water supply service, its source, and even the condition of the pipes in your home. Sometimes it’s enough to clean the kettle once every couple of months, and sometimes after a week a thick layer of scale forms in the tank.

Therefore, the decision on the frequency of cleaning your kettle is up to you to remotely give an exact answer.

How to prevent scale formation

You can hardly completely avoid the appearance of precipitation - unless you really use crystal clear water, with a minimum of heavy impurities. However, it is quite possible to reduce the amount of scale.

First of all, if the quality of water in your home leaves much to be desired, get a good water filter. Whether it will be, cassette or in-line, you decide. Personally, we recommend a nozzle for a crane - today it is considered the most effective and economical option.
Do not leave water in the kettle. After drinking tea, part of the water is not used? Pour it out. This will greatly facilitate the care of the kettle in the future.
Try to regularly wipe the kettle with a soft sponge dipped in soapy water. If there is no old plaque on the surface, you can remove particles that have not yet adhered, which eventually turn into a persistent precipitate.

Tip: Even if you do not have the opportunity to purchase a filter, try to defend the water before boiling. A day will be enough.

If it was not possible to completely avoid the appearance of scale or you need to clean the old kettle, we recommend using our recommendations.

Method 1: Clean the kettle with citric acid

A commonplace food product worth a couple of rubles, which can be found in any kitchen, can easily cope with mild and moderate scale. The procedure is not very complicated: fill the kettle two-thirds with water and add citric acid. Powder should be scattered at the rate of one tablespoon for each liter of water.

Citric acid is one of the most affordable ways to descale a kettle

Then turn on the kettle and wait for the water to cool. Drain the water when it has cooled to room temperature. Then wipe the kettle with a soft sponge. If necessary, the procedure can be repeated two to three times in a row until the scum is completely gone. After that, boil the kettle again with clean water and wash it thoroughly.

The method is effective, but it cannot cope with the old scum that has eaten into the surface. In addition, it is not suitable for enameled dummies - the surface of the latter may tarnish from the aggressive effects of citric acid. But it can be used for both ordinary and electric kettles.

findings: Effective, budgetary and very simple method.

Method 2: Clean the kettle with lemon

For those who prefer to use the most natural products in the kitchen, citric acid can be replaced with lemon. As in the previous method, you should not experiment with enameled kettles if you do not want the enamel to change color or crack.

Cut the lemon into thin slices and place in a teapot filled with cold water two-thirds. Then boil it. The procedure below is different for conventional and electric kettles.

The most environmentally friendly way to clean the kettle

In the first case, it is necessary to wait for the water to boil, and then keep the kettle on a small fire for 20-30 minutes.

For an electric kettle, you need to boil it several times, after the water cools down a little - on average, reviews recommend three boils with an interval of 10 minutes.

After the water has completely cooled, drain it, and wipe the kettle with a soft sponge to remove any residue. Most often, a second procedure is not required, but if necessary, you can boil the lemon again. Bonus is a pleasant aroma that will spread throughout your kitchen.

Method 3: Clean the kettle with vinegar

First of all, it should be noted that this technique is not suitable for electric kettles: vinegar can be used only for ordinary metal. However, for them, this method is very effective and convenient.

As in previous cases, you need to fill the kettle with two-thirds. Add vinegar, about half a glass per liter. If you use concentrated essence, one and a half tablespoons will be required for the same amount of liquid.

Carefully measure the amount of vinegar

Boil water and let cool for one hour. Then just drain. Wipe stubborn stains with a soft sponge - they will move away. After cleaning, you need to boil a kettle with plain water two to three times.

Important: Please note that vinegar emits a very sharp aroma when heated, so you need to carry out the procedure only with the windows open or the powerful hood turned on.

Method 4: Clean the kettle with soda

Inexpensive and safe for health way to get rid of even the oldest and toughest scale - the use of baking soda. It is suitable for all types of dummies, including enameled ones.

It’s important not to overdo the soda in the kettle

However, use soda carefully - it can scratch the surface, so do not just try to wipe it with plaque. In addition, in order to get rid of the old scale layer, you will have to repeat the procedure at least three times.

Add half a teaspoon of soda to half a teapot of water (no more!). For an ordinary kettle, it is worth boiling water for half an hour. For electric, it is necessary to turn on the boiling mode several times. Forum users claim that three to four times is enough.

Method 5: A mixture of vinegar and soda to clean dummies

As everyone knows, a chemical reaction occurs when soda is added to vinegar. You can use it to clean the scale from the kettle, but be careful - just pour vinegar over the kettle and pour soda on it. Such aggressive action will damage the tank.

Soda and vinegar when mixed give an active chemical reaction.

You need to fill the kettle two-thirds and add one tablespoon of soda per liter of water. Then pour half a glass of vinegar into the tank or add three tablespoons of vinegar essence.

Bring the water to a boil and hold the kettle on low heat for half an hour. Then wipe off any dirt with a soft cloth. This method is not suitable for electric kettles, but it perfectly cleans old scum from ordinary ones.

Method 6: Remove old scum with soda, vinegar and citric acid

This method cannot be called gentle: it acts very aggressively on the surface, so it can be used only if the kettle has not been cleaned for several months and a thick layer of scale has appeared inside.

This method is only suitable for the oldest scale.

In order to clean the kettle, you will need to boil water in it three times for 30 minutes. The first time - with a tablespoon of soda, the second time - with a tablespoon of citric acid, the third time - with half a glass of vinegar. For each case, water should fill the dishes by two-thirds.

After the last boil, gently wipe the kettle with a sponge, and then boil it several times with clean water. It is very important to ventilate the room well during the cleaning process, as vinegar emits an extremely unpleasant odor when heated.

Method 7: How to clean the kettle with Coke, Sprite or Fanta?

Oddly enough, however, this method has a right to exist.

First of all, a few rules:

Do not use this method for electric kettles with an open heating coil - the sugar contained in drinks will do it much more harm than scale.
For enameled surfaces, choose drinks without dyes, otherwise the shade of the container may change in a completely unpredictable direction.
If there are scratches inside the kettle, the method should also be discarded - dyes can eat into the damaged surface.

The cleaning process itself is quite simple. Fill the kettle halfway with a drink and turn it on. Leave it on for 20 minutes after the liquid boils. Drain and rinse it with clean water.

Cola is not only a drink, but also a great cleanser

It sounds incredible, but in this way you can even clean old scum. However, another question arises here - how safe is it to drink such drinks if they remove what aggressive detergents do not always cope with.

Method 8: How to clean the kettle with apple peeling.

Another method from the category of "Incredible, but true." It does not always work: if the scum is old, it will not work out in such a way. But with a plaque that just appeared, the method works perfectly. In addition, he is considered one of the most sparing. It can be used for glass teapots - it is both environmentally friendly and will help give them shine.

The method is suitable for fans of economy: no waste!

Just boil two handfuls of apple peels in half a teapot of water for 20 minutes. For electric kettles, you can turn on the boiling mode 2-3 times. Then leave the appliance for two hours. After that, you can drain the liquid and wipe the kettle from the inside with a soft cloth. Rinse it well - a clean kettle is ready to use!

Method 9: Use brine to clean dummies

Frankly, this method is for everybody. It's hard to imagine a person who likes the smell of boiling brine. However, if you are not sensitive to aromas and the naturalness of the product is important to you, you can experiment.

It is necessary to pour the brine into the kettle, boil and leave for half an hour. Then drain the brine and rinse the kettle with clean water.

Not everyone will like boiling brine.

True, not every brine is suitable - only one that contains vinegar or citric acid. It is due to their action that the effect is achieved. But here the question arises: why boil the brine, if you can just use acid or vinegar?

Method 10: Descaling Chemicals

If a quick result is important to you and you do not want to experiment with your own kettle, you can just go to a hardware store and purchase a descaler.

Anti-scale, Cinderella, Glitter ... There are many options, for every taste and budget. We recommend that you carefully study the composition: some drugs should not be used, as they can have an aggressive effect on the surface of the kettle or cause harm to your health.

If you do not want to experiment with a teapot.

On the other hand, most safe products contain the same citric acid or soda as the active ingredient. So is it worth it to overpay?

In any case, you can use any of the methods given by us - depending on the type of your teapot, of course.

The water in the taps leaves much to be desired, therefore, lime deposits remain on the walls of all the devices in contact with it.

Even expensive water filters will not be able to prevent plaque. Sooner or later it will appear on the surfaces of the device and the question will arise how to clean the kettle from scale.

Folk methods

Limescale can be removed quickly using special chemicals. But since they are not safe for health, many prefer folk methods that are time-tested.

Vinegar

Vinegar is not suitable for removing limescale deposits in an electric kettle. This tool is too aggressive and manufacturers do not recommend using it for such a technique.

You can clean the kettle with vinegar only in the last resort, when a large layer of deposits has accumulated.

During the procedure, the kitchen will be felt. Therefore, manipulation should be carried out in a room with good ventilation. Open all windows and windows.

When working with vinegar, put on a protective mask so as not to breathe in harmful fumes.

How to clean the kettle from scale:

For metal devices, such a solution is prepared: 150 ml of 9% table acid are mixed with 1 tbsp. l essences. ⅔ of water from the whole volume is poured into the container, then the prepared composition is added. The mixture is heated and boiled for half an hour. After turning off the stove, leave the kettle for 5 minutes, so that the water cools down a bit and repeat the procedure again. This must be done up to 3 times. With a strong limescale, the solution is left overnight. After that, you need good.
How to descale an electric kettle: devices from a plastic case can be damaged if you use acid in its pure form, so the preparation of the solution is slightly different. In the device to be cleaned, water is poured from 5 tbsp. l citric acid and acetic. The device is turned on, left to boil, then turned off. After 15 minutes, the process can be repeated. The process is repeated 3-4 times until all plaque is removed. Then washed with a detergent.

Vinegar descaling is quick and easy. Only such a product leaves behind an unpleasant odor, even after the use of a detergent.

Boiling with clean water, which is carried out at least 3 times, will save from the stench.

Lemon acid

Cleaning the kettle from scale is gentle for him and safe for humans. Citric acid is an excellent way to get rid of plaque from any thermal elements.

The advantage of this product is the absence of an unpleasant aroma, which is good if there are small children in the house.

How to clean the kettle with citric acid from scale:

For conventional appliances: take 2 packs of the product, fill the equipment with water, but not completely. Add citric acid to the liquid and boil. The solution should cool, leave it for 10 minutes. Then cleanse and remove the plaque. The procedure can be repeated if the plaque behind the walls is uneven.
How to clean the kettle from limescale with citric acid, if it is electric: pour a solution of 1-2 tsp into a bowl. funds and 1 liter of water. After boiling the liquid, it is drained and another is collected. It is necessary to boil clean water several times.
If the deposits are small, you can even clean the kettle from limescale with citric acid. It is dissolved in warm water, poured into the device and left for 6 hours. Then it is necessary to wipe off the coating with a sponge.

Descaling the kettle at home is easy and cheap. You can purchase the product at any grocery store.

Sodium bicarbonate

Suitable not only Coca-Cola, but Fanta, Sprite, Lemonade, Schweppes.

How to descale in an electric kettle:

First you need to release gas from the drink.
500 ml of Sprite are poured into the container, closed and allowed to boil.
After boiling, the device is turned off and the liquid is allowed to cool.
Wash off any remaining residue with a soft sponge, rinse the kitchen appliance several times with clean water.

Coca-Cola and other carbonated drinks contain phosphoric acid. Thanks to her, it turns out to remove lime deposits.

This method is ancient - it was successfully used by our great-grandmothers. The method is suitable for all types of devices and is available to everyone.

The only drawback is that he can not cope with old growths.

How to clean the enameled kettle from scale:

Water is poured into the appliance and washed apple or potato peelings are placed.
The liquid is brought to a boil and left for 1.5 hours.
Then they pass along the walls with a sponge.

You can descale the kettle using this method if you carry out the procedure several times a week.

If the appliance has not been washed for a long time, do not waste your time. Apple peel and potato peeling in this case will not help.

Brine

Removing plaque is possible with a pickle pickle or tomato. This is an effective folk way.

How to remove scale in an electric kettle:

Pour the brine into the appliance.
Bring to a boil.
Cool, pour the brine and thoroughly wash off the coating.

This tool is not independent. Thanks to vinegar and salt in its composition, the process of purification takes place.

Oxalic acid

Of all the folk remedies, oxalic acid is considered the most aggressive. It removes heavy deposits of limescale.

How to remove scale from the kettle?

Hostesses tip - action algorithm:

I pour a small amount of the product into the device and fill it with water.
The solution must be boiled and left for 5 minutes.
The remnants of the product are removed and cleaned with a soft sponge.

Oxalic acid is a good remedy and many housewives recommend using it. For descaling, you can use fresh sorrel, only it contains a little acid, it may take several manipulations.

Household chemicals

The range of household chemicals is great. Tools on store shelves effectively remove scale in the kettle.

Before using any product, gloves and a face shield should be worn.

As cleaning products, you can use Antinakipin and Major Domus. Such limescale-removing chemicals are effective in all contaminants.

How to wash limescale:

Decalcifier. First, water is poured into the processed dishes, then the contents of the sachet are poured from the calculation: 100 g per 2–2.5 l of water. The solution was brought to a boil and boiled for 20 minutes. After shutting down, the liquid is left for 2-3 hours, so that the Antinakipin works better. To clean the kettle, take a sponge and remove any residue.
Major domus. The product is poured into a container, left for 20 minutes. You do not need to boil. Then the device is washed with plenty of water. If necessary, the procedure can be repeated.
Cillitanother good industrial tool that can quickly remove plaque from the surfaces of the inner walls of coffee makers and dummies. It is necessary to fill the container with clean water, dissolve Cillit in water in a ratio of 100 ml for every 500 ml of water. The product is left for half an hour. Then rinse the container. Cillit should be used no more than 1 time per month.

Household chemicals can cause severe mucosal irritation. When using such funds, it is necessary to wear glasses, or during the manipulation do not touch the eyes with your hands.

The removal of limescale must be carried out in a timely manner so as not to resort to the use of household chemicals.

Due to the large amount of accumulated plaque, an electrical appliance is not only a source of certain diseases, the functionality of the device suffers because of it. Before changing the device to a new device, it is worth trying one of the popular cleaning methods.