Bench from two old chairs. DIY bench from old chairs New life for old wooden chairs: feeders for large dogs

So do not rush to get rid of it. Using your imagination and our tips, you can make a new set out of this furniture. In this homemade craft, we will tell you how to make an original bench out of old chairs. This option is not only convenient, but also very interesting. You can put such a bench in the courtyard of the house or in the country. The original bench will become an unusual piece of furniture.

For the manufacture of this homemade product you will need the following materials.

materials
Old chairs (4 pcs);
Band saw;
Jigsaw;
Drill and drill bits for wood;
Dowels (wooden);
Paint and varnish remover;
Joiner's glue;
Putty knife;
Varnish on wood;
Dye;
Brush;
boards;
Meter;
Marker;

Step 1.

You must first take two chairs and carefully remove the horizontal racks that are in front of the seat.

Step 2

Now we take the remaining chairs. With the help of a meter and a marker, you need to make a mark where the cut line will go. This line should be slightly lower than the front seat post. Take the saw and carefully cut the legs along the marked line.

Step 3

At this stage, it is necessary to remove the old varnish and paint from the chairs. To do this, apply an even layer of a special tool for this work. Wait for the required time (it is indicated by the manufacturer of the product). After the required period has elapsed, carefully remove the old coating. To facilitate the work, you can use a spatula, as well as sandpaper (fine-grained)

Step 4

Now you need to drill holes for the dowels in the racks from the front and end sides. First you need to make a mark with a marker where these holes will be. Then take a drill and drill holes.

Step 5

Take the dowels and insert them into the resulting holes. Before that, be sure to grease the dowels with glue (carpentry)

Step 6

After the dowels are firmly glued, it is necessary to assemble the future base of the bench. This must be done as shown in the photo below. All components of the bench are fastened together with self-tapping screws. After that, the entire surface of the bench is sanded again.

Step 7

At this stage, we will make the seat of the bench. For this we need a board. The board should be adjusted to the size of the bench. It is necessary to mark the desired length, and cut off the rest. Back height is up to you.

Step 8

If you decide to make a seat from several boards, then they must be glued together with wood glue. After that, the entire structure should be clamped with clamps and wait until the entire structure is completely dry.

Step 9

Now you need to glue the seat to the base of the bench. Lubricate the base and the seat itself with wood glue. Put weights on the board, and also clamp it with clamps.

Step 10

Wait for complete drying. After that, take masking tape and paste over the surface of the seat with it. The remaining parts of the bench should be painted with special paint for wood.

Do not rush to throw away old kitchen furniture. Your diligence and imagination will help the chairs from the set get a new life, for example, in the form of a bench. It is not only convenient, but also interesting, because you can use it not just as a bench in the yard. A bench made of chairs can become an independent and original piece of furniture in the interior of a living space.

materials

To make a bench from old chairs with your own hands, you will need:

four identical chairs;
sandpaper;
means for removing paint and varnish;
putty knife;
band-saw;
drill and drills;
wooden dowels;
wood glue;
paint for wood;
tassel;
varnish for wood;
board;
jigsaw;
meter.

Step 1. Take two chairs out of four. Choose those that are not so attractive in appearance. Carefully remove the horizontal posts at the front of the seats.

Step 2. The remaining two chairs will need to cut off the front legs. Before that, using a meter and a marker, draw cut lines. They must pass below the A-pillars on the seats. Cut off the unnecessary part of the legs with a circular saw.

Step 3. Apply a varnish and paint remover to the surface of the prepared parts of the bench. Leave it on the surface of the chairs for the time specified by the manufacturer. After it expires, remove the old coating. For convenience, you can remove rough layers with a spatula. Sand the surface of the chairs with fine sandpaper.

Step 4. On the prepared racks from the end side and on the chair racks from the front, mark with a marker in the places where you will drill holes for the dowels. Before using a drill, be sure to check the correctness of the marks. Drill holes.

Step 5. Insert the dowels into the holes on the end side of the uprights. Lubricate them with wood glue first.

Step 6. After the glue has dried, assemble the bench base. During assembly, in addition to wood glue, fasten the components with self-tapping screws. Sand all surfaces again.

Step 7. The seat of the bench will be a board fitted to the shape of the chairs. To do this, by trying on, apply the markings of the appropriate form on the surface of the board and cut off everything superfluous with a jigsaw.

Step 8. If your bench seat, as in this case, consists of several boards, glue them already fitted together with wood glue. Clamp the structure with clamps and wait for the glue to dry completely.

Step 9 Glue the seat to the bench base. Send weights to the board and secure it with clamps.

Step 10. After the glue has completely dried, paste over the surface of the seat with masking tape. Paint all other parts of the bench with wood paint.

Step 11 Remove the masking tape and cover the seat board with stain.

Step 12 Paint the entire surface of the bench with wood varnish.

After the coating dries, put pillows on the bench and enjoy your rest.

Do you have a couple of unnecessary chairs that are idle? Today we will show you how to make a cool French-style bench out of them, which is ideal for decorating the interior.

On our balcony we found old, wooden chairs, which are about 50-60 years old. They were with a soft seat and made of thin wood. By the time we got down to business, they were already falling apart.

We named the bench French because we saw a similar bench from Ballard Designs. We also want to emphasize that this is not one of those benches that are made according to the principle of lining up chairs in a row, where plywood is later laid on them. After all, it looks a little strange, we will make a bench in a classic style.

If you still make such a bench, you will surely have your own thoughts and ideas on how to do it better. We will be glad to accept your advice and work. Send them to us by mail, we will be happy to share them on our website.

After looking at our chairs, we found that they were fake, although they looked like they were quite expensive. After that, they safely carried them to the farthest corner of the workshop, to await their fate. At that moment, we simply could not get rid of them. One fine day in May, one of our craftsmen suddenly began to make our bench without us. This is not like him, because usually we have to persuade him for a long time, to do something, of course, except for custom-made furniture, this is his direct responsibility. So, let's begin!

Step one: Find chairs.

We need to find two chairs that look good from the outside. If your chairs have a slight back angle, that will be fine. Such a back will create comfort and not very angular look. It is desirable that the seat of the chair be screwed with nuts and bolts to the main body. This will make it easier for us to attach the bench base to our chairs.

- Remove the front legs and seat. Our fake chairs were held together with glue, we easily ripped off the two front legs and removed the seat. Thus, we are left with two backs of the chair.

If the front legs on your chairs can be unscrewed, it is better to take advantage of this opportunity. If the legs are broken off, parts of the tree may remain sticking out.

Step two: Making an undivided seat.

- Make a rectangular frame. The length of the bench can be made any. It depends on how many people you plan to fit on it. We took materials for our frame in an old countertop from ikea. After the frame is ready, it must be fixed with screws, as shown in the figure above. Use strong screws to make the frame immovable.

- Fixing the frame. We drilled holes where the chair seats would fit if they weren't fake, and attached our frame. On each side, we made three holes, and screwed in three screws in order to evenly distribute the weight. A little lower, we drilled a couple more holes, and screwed in the future shelf for various things. Our goal is to make the bench safe to sit on, so don't skimp on the bolts, we ended up with 7 screws on each side.

Step three. Create the bottom shelf.

“Even after we attached the main frame to our bench, the structure was still quite wobbly. To avoid falling and breaking the bench, we decided to fasten the two sides with another wooden rectangle. We will use it as a shelf. Carefully measure the distance between the legs, and do not forget about the main principle "Measure seven times - cut one." Do not repeat our mistakes, measure correctly.

- We nail the partitions. We didn't want our bench to look boxy or bulky. Instead of a sheet of plywood, which was originally supposed to be located on the bottom frame, we nailed 5 cross rails. Used for this ordinary, small carnations.

Step four. We skin and paint.

— We remove all irregularities with sandpaper. After that, if there are empty gaps between the frames and the frame, we fill them with building foam or plaster. After that, once again go through the sandpaper. If you leave the gaps unfilled, over time moisture will accumulate there and gradually destroy our bench from the inside. If you don’t have any plaster or foam on hand, just cover all these holes with paint.

— Bench painting. We used spray paint, soft cream color. Apply three even coats and let dry.

The cost of a spray can of paint in Tashkent starts from 10 thousand soums. No more expense for a whole bench.

Step five. We make a seat.

— To make a seat , we need a piece of plywood, chipboard, MDF or fiberboard. From this we will build the top of the bench.

- Upholstery seat. For soft filling, we used a synthetic winterizer. If you don't have one handy, you can pull out the cotton from old mattresses. There's plenty of it, it's quite suitable. Well, or the fastest and cheapest way is to buy a small piece of foam. It is sold in stores with furniture fittings or households. goods. It is necessary to lay out the filler on plywood so that there is about 1 centimeter of void around the perimeter. The material for covering the bench is also of your choice. We used a piece of an unnecessary sheet. Having covered our soft filler with a cloth, we wrapped the edges under the bottom of the bench, and attached it there with a stapler.

- Fasten the seat to the body. For mounting, we used an L-shaped bracket. Although normal bolts would hold up just fine, we decided to be on the safe side and use them.

Our bench is ready! All that remains for us is to decide whether the pillow will be located there or not. In an unusual environment for ourselves, with needles in our hands, we decided to try. Taking the remnants of the sheet that we had left from covering the bench and synthetic winterizer, we began to sew and fill our pillow. It turned out quite well, for people who have been making custom-made furniture for many years. Making such a bench will take you half a day, and maybe the whole day. If you have a desire to suddenly do something with your own hands, this bench is a great option to start with. In the yard of your own house or in the country, this piece of furniture will be not only useful, but also beautiful. And decorating it with decorative pillows, the bench will be an excellent tool for decorating a room or area.

I hope that your bench turned out to be as strong as ours. It does not stagger or even sway under a load of about 200 kg. And if something went wrong, or simply there is not enough time, patience or strength, but you want to get such a bench. You can order it in the furniture to order section. And we will not tell anyone that you did not do it.

We believe that this is a great way to save old chairs and give them a second life. Send us your work by mail. We will be glad to show the world what you have done.

materials

To make a bench from old chairs with your own hands, you will need:

four identical chairs;
sandpaper;
means for removing paint and varnish;
putty knife;
band-saw;
drill and drills;
wooden dowels;
wood glue;
paint for wood;
tassel;
varnish for wood;
board;
jigsaw;
meter.

Step 1. Take two chairs out of four. Choose those that are not so attractive in appearance. Carefully remove the horizontal posts at the front of the seats.

Step 2. The remaining two chairs will need to cut off the front legs. Before that, using a meter and a marker, draw cut lines. They must pass below the A-pillars on the seats. Cut off the unnecessary part of the legs with a circular saw.

Step 3. Apply a varnish and paint remover to the surface of the prepared parts of the bench. Leave it on the surface of the chairs for the time specified by the manufacturer. After it expires, remove the old coating. For convenience, you can remove rough layers with a spatula. Sand the surface of the chairs with fine sandpaper.

Step 4. On the prepared uprights on the front side and on the uprights of the chairs on the front side, mark with a marker in the places where you will drill holes for the dowels. Before using a drill, be sure to check the correctness of the marks. Drill holes.

Step 5. Insert the dowels into the holes on the end side of the uprights. Lubricate them with wood glue first.

Step 6. After the glue has dried, assemble the bench base. During assembly, in addition to wood glue, fasten the components with self-tapping screws. Sand all surfaces again.

Step 7. The seat of the bench will be a board fitted to the shape of the chairs. To do this, by trying on, apply the markings of the appropriate form on the surface of the board and cut off everything superfluous with a jigsaw.

Step 8. If your bench seat, as in this case, consists of several boards, glue them already fitted together with wood glue. Clamp the structure with clamps and wait for the glue to dry completely.

Step 9. Glue the seat to the bench base. Send weights to the board and secure it with clamps.

Step 10. After the glue has completely dried, cover the surface of the seat with masking tape. Paint all other parts of the bench with wood paint.

Step 11. Remove the masking tape and cover the seat board with stain.

Step 12. Paint the entire surface of the bench with wood varnish.

After the coating dries, put pillows on the bench and enjoy your rest.

If you have a few old chairs that seem to have served their purpose a long time ago, this does not mean at all that it is time to take them to a landfill or send them to the oven. Think about where at home, in the country, in the yard there is not enough convenient place to sit down. Original handmade benches will definitely come in handy there. Show a little imagination, you will succeed.

home bench

A set of kitchen chairs has fallen into disrepair. But just one small idea, and they became the basis for a charming bench. Comfortable spacious furniture made from chairs with your own hands will take its place in the hallway so that everyone who enters can sit down and change shoes.

What you need to work

Before you start creating a bench, prepare everything you need:

Three old chairs. If you have a choice, take the best preserved ones.
3 or 2 boards. The quantity depends on the width of the lumber. Put together, they will become a seat.
2 railings from an old chair. If not, choose the appropriate planks.
Sandpaper.
Drill with a drill.
Self-tapping screws.
Clamps.
Jigsaw.
Wood putty.
Dark paint on wood in a can.
Blue paint and roller.
Adhesive protective tape.

Operating procedure

Consider the selected chairs. 2 in the best possible way, place on the sides of the future shop. Check connections. If they become loose during use, fasten them additionally with screws or self-tapping screws.
Dismantle the old soft seats from the chairs.
With a drill on self-tapping screws, install the railing from the old chairs to the outer chairs. If there are no such finished parts, make your own form that is convenient for you.
Carefully consider - it is necessary that the chairs standing next to each other tightly touch each other with the side surfaces of the front legs. If this does not happen, you can trim these places a little, then sand them with sandpaper.
Now that the adjacent legs are snug against each other, apply wood glue to one of each pair. Then fasten them in pairs with clamps until the connection is strong.

Attention! To avoid dents from clamps on the legs, use small even pieces of boards, plywood, thick cardboard as spacers.

In the backs of the chairs there are metal bars in a metallic color. To paint them, we first cover the wooden parts with protective adhesive tape. Then, from a spray can, we spray dark paint onto metal parts.
You can start assembling the seat. Three boards cut along the length of the seat should be adjusted to size. Then cut small grooves for the armrests on the sides.
On the screws, attach the two extreme boards to the sides of the base of the chairs.
To stiffen the structure, install small wooden inserts between the non-touching parts of the chairs located next to each other, as shown in the photo below. Attach them with glue and on self-tapping screws by screwing them from the back.
Fill with putty the bumps and holes on the front side of the boards.
After drying, sand the surface of the boards and the sides, slightly round off their edges.
Use a roller to apply paint to the bench seat. Don't forget to pre-stick the protective tape on the parts of the backrest, railing and legs that are nearby.
After the paint has dried, we take sandpaper and lightly rub the legs and wooden parts of the back so that the bench is evenly aged and takes on a somewhat rustic look.

Work completed. Putting a bench in your hall, take care of the decor. A few original bright pillows will decorate the shop and make it more comfortable.

Bench for home

The bench is not the most necessary piece of furniture, but it is so comfortable and aesthetic that everyone likes it. This seat can be placed in the hallway, bedroom, balcony, garden, anywhere. This master class can turn your dream into reality. Make a bench out of old chairs. Moreover, the older the chairs you pick up, the more interesting the result can be.

Materials and tools

Chairs (preferably with a beautiful curved back) - 2 pcs.
Boards.
Plywood.
Thick foam.
Decorative fabric.
Furniture stapler with staples.
Wood glue or liquid nails.
Drill, self-tapping screws.
White (color of your choice) paint, brush.
Hacksaw.

Description of the work progress

For work, we need only a solid part - the back + rear legs. We carefully remove all other parts so as not to damage the necessary ones.
For the base of the bench we take strong boards. We measure the desired width of the seat with a tape measure - cut out the appropriate details.
The length of the bench seat must not exceed 2 widths. Cut out the details of the desired size.
Using glue and screws, we assemble the frame. We grind its surface with sandpaper.
We install the frame in the place where the seats were located, on self-tapping screws and glue.
Similarly, we assemble another frame for the lower shelf. We attach strips of smaller thickness to it. Sand the rough spots with sandpaper. The lower structure will serve as a shelf and an additional stiffener for the entire structure.
We mount the frame-shelf to the legs in the place where the crossbeams of the chairs were attached.
Carefully fill in the recesses with self-tapping screws, irregularities, etc. with putty. After the agent dries, we grind the surface.
You can start painting the finished base.
It remains to cut the seat out of plywood and glue thick foam rubber on it. After drying, use a furniture stapler to cover the seat with a decorative fabric. Banquet is ready.

The original bench around the tree

Our bench will be a wonderful decoration of any garden. On a hot sunny day, it will allow everyone who wishes to relax in the shade under a tree at once. Everyone will get an equally comfortable place, because the shop itself is located in a circle.

Of course, such garden furniture can be purchased at the store, but it will cost many times more. To make a bench from a chair with your own hands turned out no worse than that made by a master, you do not need to have professional work skills. It will be enough for you to get acquainted with the master class and prepare everything you need.

Preparation for work

To create a garden bench you need to use:

6 identical old (or new) kitchen chairs.
Wooden planks 2.5 cm wide.
Sandpaper or sanding machine.
Drill with self-tapping screws.
Peel.
White paint, brush.
Roulette, pencil.

detailed instructions

Dismantle the seats on the prepared 6 chairs - they will not be needed in this project.
If necessary, sand the surfaces with sandpaper or with a grinder.
Paint the chairs white.
After the paint has dried, arrange the chairs in a circle with their backs facing in. As you guessed, the bench will be outside. Given that the circle has 360 degrees, then the angle of each chair is 60. Thus, we can try to calculate the size of the planks cut out for the seat. If it turns out a little inaccurate, you can correct the size.
Alternately cut out 6 strips of the same length. We fasten them to the chairs with self-tapping screws so that the center of each plank coincides with the center of the chair. As a result, each seat should have 6 slats, each next longer than the previous one.
After the final adjustment of the length with sandpaper, sand the seats a little, remove burrs and roughness.
Measure the distance between the edges of the 1 and 6 strips with a tape measure. Cut out the part according to this size.
Attaching it to the seat, mark the bevel with a pencil. Cut off the excess.
Using glue and screws, install the planks, as shown in the photo below.
Do the same with the rest of the future shop.
Sand the installed parts so that they cannot be injured when touched.
Take it apart again to paint the seat trims.

Congratulations! Your bench for the garden or yard is ready. It remains only to find a tree, the ground under which will be as flat as possible, otherwise your work may not be assembled. Use the advice - level the ground around the tree with mulch.