DIY garage accessories. Useful DIY garage accessories: manufacturing technology

The word "motorist" today is not just a term for the owner of a personal vehicle. A motorist is a lifestyle. The modern garage is the mainstay of the do-it-yourselfer.

Peculiarities

The specificity of the arrangement of the garage space is that the layout, ceiling height, number of floors, garage area, the number of cars "lodging" in it are purely individual. There is no recipe for all occasions - everyone decides for himself what he likes.

You just need to take care of:

dryness and heating of the room;
good ventilation;
protection from thieves;
arrangement of a desktop and storage systems;
good lighting.

Depending on the size of the building, the area occupied by equipment, fixtures, and communications should not be more than 20% of the garage area. And the distance from the side rack to the parked car should be no less than the width of its doors.

The garage is a multifunctional space. To correctly delineate it, define the work areas. So you can understand if you have enough space to accommodate everything you need. It is better to disassemble the things that have accumulated in it in advance and throw out everything unnecessary.

Naturally, a garage is unthinkable without a workshop area. A workbench placed against the far wall is useful for repairs and for hobbies. Place tools and finished crafts on a shelf directly above your work area.

It is convenient to store hardware, dowels and other small items in transparent jars, glued with a lid to the shelf. Another little trick is that the magnetic stripe glued to the furniture can be a great way to save space.

Where and how to place the tools?

The order in the workshop is impossible without the proper placement of the tools.

Place the essentials on the board or hanging shelves above the workplace so that everything is at hand. It is convenient to store the necessary tools vertically on plywood boards with holes drilled in them. Heavier utensils will snuggle up on the shelves.

Holders made of PVC pipes are easy to manufacture and convenient.

Homemade shelving

Wooden and metal shelving will be the best option for a garage, as plastic quickly breaks down and cannot withstand heavy objects.

Racks are:

stationary - mounted on the wall for stability;
collapsible - if you have not yet decided where it is better to put the rack, it can always be disassembled and mounted in another place;
mobile - on wheels to move without unloading;
cantilever - for storing long items.

The advantage of wood furniture is the relative ease of manufacture. It can be assembled using a standard carpentry kit without the need for specialist assistance. It is easy to make a wooden rack of any size and shape, and a broken shelf can be easily replaced without disassembling the entire structure. In addition, it is cheaper to make a rack from wood than from metal.

The disadvantages of a wooden product include its fire hazard and stationarity.

It is better to mount a wooden rack immediately "thoroughly", since it will loosen from movement.

The most budgetary and easy-to-handle wood is pine. It does not rot, does not crack when dry. But also the pine is rapidly deteriorating. If you don't want to change furniture every five years, choose a harder wood. Oak and larch are harder and also do not rot.

For maximum functionality, the rack should be placed along the entire length and height of the wall. Just be sure to leave a gap of 5-10 cm between the wall and the rack to make it easy to install.

We make the width of the shelves such that it is safe to walk past the rack with the car parked in the garage. It is not worth doing a great depth of the shelves, as it will be inconvenient to use them. The optimal size is 50-60 cm.

We cut out the supports from a bar with a section of 10 by 10 cm, the crossbeams from a bar are thinner - 5 by 5 cm in section. The distance between the racks is about a meter and no more, so that the shelves do not bend or break under the weight of the equipment. We make the shelves from a bar, or a thick plywood sheet. We apply the markings for attaching the crossbars to the wall along the height of the future shelves. Be sure to measure the evenness of the marked with a level and tape measure.

Securely screw the boards to the wall with self-tapping screws every 40-50 cm. Attach the boards of the opposite crossbars to the fixed crossbars. Attach the vertical boards to the horizontal ones, carefully so as not to screw them to those that are nailed to the wall. We put aside the workpiece, cut the crossbeams for the shelves. We hang them on the frame every meter. We fix the assembled workpiece and measure the final size of the shelves, cut it out and fix it with self-tapping screws.

Anyone who is engaged in carpentry work will need a mobile shelving for storing lumber.

To build it you will need:

square;
screwdriver;
electric jigsaw;
clamp;
self-tapping screws;
4 furniture casters;
4 boards 2.5 meters long.

Decide on the parameters of the rack and draw up a working drawing. Measure and saw the pieces to the desired size. Make two identical side pieces, like a stepladder. The distance between the rungs is equal to the height of the shelves.

Assemble the base frame. It should be strictly rectangular. To align, secure the pieces to the table at a 90 degree angle using a clamp and square. Attach the wheels to the base. Fasten the side elements at a slight angle, like a ladder.

A simple rack of two boards will perfectly cope with the storage of long garden tools.

You just need:

mark the hole of the holders according to the given dimensions;
drill through holes on a carpentry machine;
carefully cut out the inclined part;
paint or varnish ready-made holders and hang on the planned shelf space.

Metal furniture can withstand heavy loads and last longer than wooden furniture. To save time and effort, you can order ready-made racks, but it's cheaper to make them yourself. You don't have to buy new metal, take what you already have. For example, water pipes that you got on the occasion, but were not useful in the household.

Most often, the frame is welded from shaped pipes and corners.

This is done like this:

We outline the position of future shelves on the vertical racks. Make sure they are on a par with each other. The distance between the lower shelves is greater than between the upper ones. At the top, just right to reserve a place for a high shelf for storing light oversized items.
For the base slats, take a corner 5 by 5 or 5 by 7 cm, it will protect things from accidental falling or slipping. The span between the uprights is no more than a meter.
We weld the corners, control the level of all corners - they must be straight.
We check the diagonals of the welded frame, and at the back we install crosshairs made of reinforcement for additional rigidity of the structure.
Coat the welded joints with an anti-corrosion agent, prime and paint the furniture with wear-resistant paint.

The upper shelves are used for lighter items, they are covered with plywood, it is advisable to cover the lower ones with a steel sheet. It is better to strengthen the shelves for storing especially massive items with several stiffening ribs.

It is also permissible to store various small and not very heavy things in a plastic rack. It is easy to assemble from empty cans.

This option is useful for everyone who does not have enough space in the garage or finances to install a rack. And small things will stop scattering around the room in disorder.

To do this, you need to take the canisters, wash them well so that no traces of their contents remain. The same canisters can be used as dividers or pull-out shelves on the finished rack, but then the side must be cut off so that the handles remain.

A PVC pipe rack is also suitable for storing light items.

Manufacturing of hanging shelves

For the DIYer, a garage shelf can be more than just a tool storage, but also a place to display finished work.

The hinged shelf can be assembled by yourself in the same way as the rack. It is even easier to install a shelf from corners - metal or wood.

Also, baskets hung on the wall can play the role of hinged shelves.

It is worth plastering the walls in advance before installing the shelf. This will prevent condensation from forming on the walls after installing the shelves.

You can attach the shelves anywhere where no one will cling to or hit them:

above the windows, if any;
above the workplace;
under the ceiling.

Today the market offers various new items such as shelves with a lifting mechanism, which can be hung under the very ceiling and lowered down when needed.

It is easy to make a suspended ceiling structure yourself by assembling shelves from thick sheets of plywood or fiberboard onto studs.

For this you will need:

large anchors (4 pcs.);
hex nuts-couplings for couplers (4 pcs.);
simple nuts (12 pcs.);
studs (4 pcs.);
large diameter flat washers (8 pcs.);
Grover washers (4 pcs.;
drill;
puncher;
spanners;
screwdriver;
level;
electric jigsaw.

First, we cut out the shelves of the required size from the plywood sheet. They can be reinforced at the edges with a metal profile.

We retreat 5-7 cm from the edge of the tile and make holes into which we will thread the pins. Such an indent is necessary so that the edges of the shelves do not crumble during operation. So that the shelf does not bend from long use, it is better to put the load-bearing pins every 60-70 cm.

Through the drilled holes we make markings on the ceiling in the place where we will hang the shelf. According to the marking, we drill holes for the anchors, remove the dust from them, hammer the anchors to the end and tighten the nuts.

Now we connect the studs with the anchors using the nut-sleeves. We strengthen the connection with ordinary nuts.

screw a nut onto a hairpin fixed to the ceiling, then a washer;
string the shelf onto the ends of the studs;
we fix it with a Grover washer and a control nut, or better with two locknuts.

A ceiling shelf will make your garage easier to use. She has only one drawback - a movable structure. It is better to fix the shelf with an iron corner. We attach one edge to the wall, the second to the base of the shelf. Now it will not loosen and will last longer.

Shelf-shield for storing tools with your own hands

The Shield Shelf is a more compact alternative to the regular wall shelf and will help you organize your tools inside your garage so that they can all be seen.

It is quite easy to put together a panel shelf from plywood and wooden blocks.

Process description:

cut out a panel of the required size from plywood and mark the position of the shelves;
put together shelves with side walls along the length of the shield;
fix the shelves on the board with self-tapping screws;
then there are two options: we install the bracket on the back wall and hang it on hooks mounted in the wall or fix it on the support posts of the desktop.

A locksmith's workbench is more suitable not a wooden shelf, but a metal shield with holes, on which it is convenient to hang both shelves and tools on hooks.

How to make a workbench yourself?

A workbench is a must-have item for a garage workshop. On it, you can sort out machine parts, and solder radio equipment, and cut out with a jigsaw.

Making a workbench usually starts with a detailed design drawing.

Measure the area of your workspace and the height of your workbench.

The optimal workbench height is usually 90 cm, but this is not an absolute figure and depends on the height of the craftsman and whether he prefers to work standing or sitting.

To make a workbench yourself, you will need:

jigsaw or hacksaw;
drill and a set of drills for wood and metal;
screwdriver;
carpentry square;
roulette;
level;
spanners.

When choosing wood, check that it is free of cracks and knots.

Before getting started, prepare:

bars 10 by 10 cm for legs;
two thick plywood sheets;
boards with a section of 5 by 15 cm;
bolts (take furniture with a square head so that they do not turn);
nuts and washers;
self-tapping screws.

Draw a drawing according to your measurements, indicate the exact dimensions of the parts, so as not to be mistaken.

First, we make a top frame with a center brace. We strengthen 6 supports on the frame. Place the leg in the corner of the frame and drill two through holes through the leg and side board. Then secure with long bolts. Measure thirty centimeters from the bottom edge of each leg and fix horizontal boards at this height for greater stability of the structure. They will also become the base of the bottom shelf or drawers.

Screw the countertop flush with self-tapping screws. Cover the finished countertop with a layer of hardboard. For greater wear resistance, hardboard can be replaced with steel sheet.

We measure the gap from the central to the end supports, set the shelf according to the measurements. We cut out the grooves for the support legs with a jigsaw or a hacksaw. Drawers can be installed instead of the lower panel. To do this, you will have to buy guides, handles and more plywood sheets. Screw the guides to the supports with self-tapping screws and install the knocked-down boxes on them. Make sure to match the sizes.

Drawers can be installed instead of a shelf. Above the workbench, install a shield or hinged shelves with a margin for new tools that will appear in the future.

If locksmith work is expected, only a metal work table is suitable.

To build it you will need:

"Grinder" with cutting and grinding discs;
level;
electric jigsaw;
measuring instruments;
post beams of small size made of profiled pipes - for the frame part;
steel strips - for welded struts in the corner area;
shaped pipes with a wall thickness of 3-4 mm;
corner;
plywood one and a half centimeters thick and drawer guides;
drill;
screwdriver.

We weld the frame first. To prevent the frame from leading, the beams should be spot-welded, spread out on a flat surface. Welding seams are made in turn on one side and on the other at the joints.

We mount the racks and a horizontal beam from the back side to the base. Check all corners are even. If the corners are not straight, they can be tweaked with a hammer.

A tabletop is collected from the boards and impregnated with a refractory compound. We tighten the bars with screws and glue them. A steel sheet is laid on top.

A shield for placing tools is mounted on vertical rack parts, wooden boxes are equipped in the pedestals. Treat wooden elements with a fire-resistant compound.

If your garage space is very small, build a foldable workbench. You will need a tabletop, a board along its length, screws, dowels, a drill, a screwdriver, legs and door hinges.

First, fix the board to the wall at the level of the future countertop. Screw the door hinges to the board with self-tapping screws. Attach the tabletop to the door hinges so that it goes down. When raised, it will be held by the legs.

It would be ideal to carve grooves for the legs in the tabletop with a chisel so that they do not slip.

For car owners, property on wheels is of great concern. Today, the lock is no longer the most reliable protection against car theft.

If you have an old push-button telephone left working. Make it a simple electronic alarm. When intruders enter the garage, the smart GSM alarm will call you or send you a pre-dialed SMS.

The alarm is soldered from:

wires;
push-button mobile phone with a quick call function;
magnet;
closed sealed contact;
toggle switch or push-type switch.

You should hide your mobile phone more securely. Also, take care of timely recharging or power the phone from the mains.

We mount the alarm:

set up speed dialing to the desired number;
remove the front panel to provide access to the keyboard matrix;
solder one wire to the end button, the other to the shortcut button, then connect the wires to the reed switch. One wire must be with a switch;
imperceptibly install a magnet and a reed switch on the gate leaves, so the contacts were closed when opening;
hide your phone and wires so that intruders don't see them.

How to store tires correctly?

A seasonal set of tires is not only a bulky and bulky item, but also requires special storage conditions. Sets of tires with and without disks are stored differently. It is better to suspend tires on disks. At the same time, it is not necessary to buy special hooks for tires. You can collect suspensions from scrap materials.

Prefabricated wheels can also be stored lying down, but tires without disks are stored only "standing", and, moreover, they are turned once a month.

A place for storing "lying" or "standing" tires can be equipped under the ceiling or on one of the shelves of the rack or under its lower shelf. The ceiling rack for tires can be assembled from profiles and corners - you only need a drill and a grinder, and if you have a welding machine, you can weld it.

Useful Gadget Ideas

Garage masters come up with many interesting inventions to make work easier.

For example, a cyclonic vacuum cleaner. We take a dense plastic or metal container (or a 5 liter bottle), and make two holes in its upper part - one at the edge and the other in the center. The diameters of the holes must match the section of the hoses that will be connected to the device.

The inlet pipe is on the edge. We will mount a plastic elbow into it, which will provide cyclonic air movement. We insert the hose from a conventional vacuum cleaner into the central upper hole.

Such a vacuum cleaner will easily suck in small stones, sawdust, dried dirt, and all solid dirt will remain in the tank.

Another useful "homemade" - "bottle cutter", can be made with a drill from scrap materials. All you need is a piece of board or plywood, a utility knife blade and a couple of bolts and nuts.

Mark the centers of the washers by placing them in the middle of the board. Drill the holes, and be sure to re-drill them from the back so that the bottle cutter does not rotate during use. Install the bolts.

A life hack should be applied like this:

we put several washers on the protruding ends of the bolts. The more there are, the thicker the rope is;
on top of the washers we put a clerical knife or at least a fragment of it, and for reliability we fix it on top with nuts;
take a plastic bottle, cut off the bottom and make an incision so that you can pull the resulting "tail";
place the blank under the knife and pull the “tail” into a full rope.

From one two-liter bottle, you get about 25 meters of strong, very useful rope in the household. A strong rope from a bottle will be useful for you and for pulling reinforcement under concrete pouring, and for wrapping the sliding handles of the tool, and even for weaving baskets. In order not to cut herself, it is better to work with gloves.

A garage winch is a simple mechanism that will help you drag bulky and bulky loads. The oldest and simplest winch is a hand winch. The cable is wound around it using a long lever. It is relatively compact, does not depend on electricity, is inexpensive, and by increasing the lever, you can increase its pulling power.

The disadvantages include the need to apply significant physical effort and some inconvenience when working in cold weather, in mud or in cramped conditions.

To build, purchase:

short pipe;
axis of rotation;
lever arm;
cable;
hook-carabiner.

Assemble the winch from the prepared elements:

drive the axle securely into the ground;
weld the pipe to it;
on one side with a loop, fix the cable on the axle so that it twists on it when turning, and on the other, hang the hook.

Cellar device as a viewing pit: pros and cons

Any motorist who knows how to independently service his car and wants to reduce the production costs of repairing it needs an inspection pit.

Despite the additional costs of arranging the pit, experienced drivers will only benefit as they can:

independently inspect the steering, chassis and brake parts and identify possible malfunctions in time;
change oil;
save on minor repairs that they can carry out themselves;
protect yourself from unnecessary costs associated with the dishonesty of car service mechanics;
the presence of an inspection pit increases the cost of the motorhome if it is sold;
For many car owners, self-examination of the car and its repair is an exciting hobby.

The organization of an inspection pit in the garage can be hindered by:

groundwater level: if it is higher than 2 meters, water will flood the pit;
instability of the ground;
the complexity of the organization of the drainage system in the finished garage.

It is ideal to plan an inspection pit even at the design stage of a garage, for example, a country house. But often the need for it arises when the garage has already been purchased and it is either without a cellar at all, or with the so-called "vegetable pit".

In the first case, you will have to carry out a thorough study of the type of soil, establish the level of occurrence of groundwater and check for the presence of underground communications in the place designated for the pit.

It is better to entrust all research to professionals. This will allow you to quickly assess the situation, saving time and effort.

Work can be started if the technical plan of the area allows you to dig deep into the depth of 3 m or more - then the deep foundation will be protected from erosion. Otherwise, the foundation will be flooded.

If a vegetable pit is already equipped in the garage, part of it can be converted into a viewing pit, it will even be somewhat easier than digging a pit from scratch.

First, you need to move the entrance to the cellar to a convenient place and build on the missing walls with bricks.

The dimensions of the inspection pit are calculated:

length - machine length plus 1 m;
width - the width between the wheels is minus 20 cm so that the car does not fall through while driving into the pit;
depth - the driver's height plus twenty centimeters.

If the depth of the vegetable pit is more or less than this value, it is better to build on or deepen the bottom. All elements of the pit and cellar outside must be insulated with expanded polystyrene and a drainage system must be installed, if it was not previously equipped.

It is better to take care of the wiring for future lighting right away. Also, do not forget to equip a tool niche in the wall.

After the completion of the work, the garage floor will have to be redone. The problem will be solved by concrete pouring, which can be done independently if you first install reinforcement or guides.

This gives us a separate entrance to the cellar, where you can store the products of a private household, and a separate inspection pit, covered with a boardwalk or sectional door.

If it is impossible to equip an inspection pit, with a sufficient height of the garage ceiling, a homemade overpass can become an alternative to the inspection pit.

They are:

full-size (designed for the entire length of the car);
mini-overpasses (allow you to raise the front or rear axle of the machine).

The simplest mini-overpass is welded from profiles and fittings.

Lighting

To work comfortably in your garage, you need the right lighting. The illumination of the garage depends not only on the number and type of lamps used and the power density of the network per 1 m2, but also on its area, height, number and nature of working areas, even on the color of the walls. A room with dark walls requires brighter lighting.

A multi-level garage lighting system is considered the most optimal. It involves the installation of a central lamp in the middle of the room and spot lighting in the working areas.

Calculating the height for multi-level lighting:

It is easy to check the correct installation of the lamps - just look at the car. It should not cast a shadow in either direction.

Formula for calculating the power of ceiling lighting: "P = S x W / N":
P is the total required power, W / m2. W is the power of one lamp, W. N is the number of lamps (luminaires), pcs. S is the area of the room, m2.

For LED and halogen lamps, the optimal indicator is 16-20 W / m2. This value is suitable for rooms with a ceiling height of no more than two and a half meters. For higher ceilings, this figure should be multiplied by 1.5.

Halogen lamps are similar in principle to incandescent lamps, but they give more light. They also have a longer service life - 4 thousand hours. The fluorescent tube is filled with an inert gas. The inside of the glass is covered with a phosphorescent compound that glows under the influence of an arc discharge.

Lamps must be in shades. You should also take care of the voltage surge stabilization system.

The most expensive lighting is LED. But it is more economical than fluorescent lamps by 50%, and the service life of LED lamps is 50 thousand working hours. And they do not need plafonds, since LEDs do not contain toxic components and give light that is closest to natural.

When illuminating the inspection pit, low-power LED or halogen lamps can provoke an electric shock due to condensation that settles on them. LED bulbs are more convenient because halogen bulbs get very hot. Make the light retractable so it won't be harmed by accidentally dropping the tool into the pit.

Heating devices

Before choosing the device itself, determine whether you will heat the garage around the clock, maintaining a certain temperature, or turn it on only for the duration of the work.

Good ventilation should be done in advance. When installing any kind of garage heating, it is necessary for safety precautions and the norms of Russian legislation.

An excellent option is to connect the garage to the home heating system, but it is only suitable for a personal building on the territory of a private land plot.

The most popular option is compact heaters. Many motorists choose to buy them, thinking that it will cost more to assemble them by yourself.

In reality, it is possible to assemble a compact heater from quite budget materials. The overwhelming majority of home-made heating units work efficiently due to thermal film. Thermal film is a multi-layer electric heater that can be assembled from laminated plastic or carbon fiber. It heats up quickly with low energy consumption.

To check the functionality of the assembled device, you will need a multimeter. The rest of the parts can be purchased at a hardware store or found in your home pantry.

You will need:

two-core wire with a plug;
laminated paper plastic (area of one element is 1 m2);
epoxy glue;
graphite, crushed to powder.

First, we prepare an epoxy-graphite mixture. How well the device will heat up depends on the amount of graphite chips. On average, the temperature reaches 60-65 degrees.

Apply the mixture to the rough side of the plastic sheets in zigzag strokes. We fasten the sheets with epoxy glue with the front side to each other. Make a frame around the outline of the sheets to further fix them.

Next, we attach the terminals to the graphite conductors on opposite sides of the heater. If you want to regulate the temperature, you can mount a dimmer in the wire. To avoid a short circuit, the assembled device is thoroughly dried. Then test the device (a multimeter is useful for this), measure the resistance and power. If it turns out that the homemade heater is safe enough, you can use it.

The electric heater, made independently by the type of thermofilm, can be used both in a vertical, and in a horizontal and inclined position.

The main thing is to observe safety precautions:

you must not leave the included heater unattended;
you should not entrust the supervision of him to children;
do not place the device near flammable objects.

If you decide to equip stove-type heating in the garage, you must obtain permission from the fire service and the garage association.

However, fire inspections rarely give permission to use home-made "stoves", and in the case of their unauthorized installation, all responsibility for any damage will fall on its owner.

Examples and variants

There are many options for using free space in the garage.

The most popular ones are:

Workshop. The garage is an ideal place for activities that did not find a place at home - noisy locksmithing, flammable lamp-working and soldering with an unpleasant smell of burnt rosin will finally find a cozy refuge.
Warehouse. Every home has a ton of things you don't want to keep at home - seasonal sports equipment, sledges, even off-season clothing and family photo albums.
Garden corner. A garage is often used by hobby gardeners to store bulky and oversized garden supplies.

As they say, there is never a lot of space in the garage. Men who spend a lot of time in the garage will agree that in some cases, every minute and every square centimeter of free space counts. That is why the garage master needs a competent organization of the workspace. Here, various people help out and help in every possible way. devices for storing building materials, work equipment, machine parts and other things necessary for work. To keep your electronic, garden and garage gadgets in place, use the following tools:

- stands;
- shelves;
- sliding panels;
- racks;
- organizers for tools.

Also, for clarity, we offer homemade products for the garage and do-it-yourself home craftsman - the YouTube video will reveal all the nuances of organizing the workspace and suggest fresh ideas.

DIY homemade products

Man began to engage in homemade homemade products since prehistoric times. Actually, all industrial processes are improved once artisanal or home developments of folk craftsmen. We sometimes do not even think that we are paying for the things that we can do with our own hands. Homemade homemade schemes are easy to find online, and supplies can be bought at a hardware store or found at home.

For example, from a cardboard box and a piece of cloth you can make a convenient portable organizer for towels and other textiles.
The topic of storing all sorts of little things is inexhaustible, fortunately, as is the number of ideas. Successful decor ideas you can also draw from ordinary things - let them be buttons or empty cans.
Cool shelves are obtained from regular drawers... How do you like this idea?

As you can understand, with detailed instructions, it is not so difficult to make homemade products with your own hands at home. The video will help you comprehend all the nuances of this enjoyable activity. Useful tips, interesting ideas - everyone must watch.

Homemade products for a summer residence and a garden with their own hands

At the dacha, there is usually a little free time for creativity and arrangement of the surrounding space. That's why have a few fresh ideas on hand to embody them in your own summer cottage. Do-it-yourself country homemade products at home can be ingeniously simple. From the materials at hand, you can make unexpected and extremely useful things in your household.

Ordinary stones turn into fairy animals.From an old teapot it turns out to be a wonderful flower pot.

Used tires- it has already become a classic in the world of garden figures. Stylish lamps for the country interior - do it yourself from a regular can and candles (do not forget about safety precautions).
- a great idea for a small summer cottage.
Do-it-yourself homemade products for a summer residence and a vegetable garden are often obtained by themselves, without unnecessary time and financial costs. Perhaps you did not know how useful for the household will be plastic bottles. Retired plastic bottles can serve as the basis for an incredible decorative flower bed. Cool "blooming" pillars will significantly decorate your summer cottage space.

DIY garden furniture successful homemade products: photos and drawings

In the previous sections, we told you about homemade products that will become indispensable for the household and household. However, do not forget about the rest, before which, nevertheless, you will have to work a little. Cozy armchairs, various tables and benches, swings and hammocks- all this dacha and garden bliss can settle on your site. We suggest that you familiarize yourself with the photo instructions and drawings for the manufacture of garden furniture. We have selected the best options for you.

For the rational use of space, communications and devices for the garage are used with their own hands from scrap materials. It is necessary to use walls, an underground level in the process, place machines inside the room, organize normal lighting.

DIY garage accessories

For the comfortable operation of a room intended for storing a car, you should adhere to certain recommendations:

the tool must be as accessible as possible;
storage areas equipped with shelves / racks are much more convenient;
do-it-yourself workbenches, a viewing hole, home-made machines and garage accessories expand the capabilities of the car owner;
the cellar allows you to save space on the site;
the quality of lighting depends on the productivity of work, minor repairs.

Organization of the working space inside the garage

Depending on the size of the building, the area occupied by equipment, fixtures, and communications should not be more than 10 - 20% of the size of the garage floor.

Storage locations, racks, workbenches

In 80% of cases, do-it-yourself garage fixtures are constructed to store accessories, tools, and vehicle equipment. It should be borne in mind that the most bulky parts of the car are sets of winter / summer tires, depending on the season.

Tire storage rules

It is more convenient to store wheels on brackets of the following design:

two triangular frames from the corner, connected by jumpers from any rolled metal;
the triangles are attached to the wall, the wheels are installed perpendicular to the supporting structure, falling slightly between the lintels.

Wheel storage brackets

This is the most economical option for storing rubber in the off-season. Straight and corner workbenches are most in demand by car enthusiasts. The lower space is usually filled with shelves or drawers, sharpeners and vices are located on the table top.

Homemade garage workbench

An example of organizing a corner workplace

A folding workbench can be very convenient.

Wood is a versatile material for both workbenches and shelving

A wooden workbench is easier to build on your own, but it has a lower resource than an analogue from rolled metal, which needs to be welded. If no corners for shelves are laid in the load-bearing walls during construction, it is easier to make racks from rolled metal or sawn timber.

Homemade garage racks

Use for glass bottle racks

Built-in wardrobes are very compact

Original hanging shelves are suitable for storing long items

The design and arrangement of shelving within each garage is too individual to follow general guidelines.

Inspection pit and cellar

An inspection hole becomes a necessary device for a garage with your own hands. Moreover, the owner does not have to make all the repairs on his own. Underground communication can be used in the following cases:

inspection of the chassis, steering, brake system before a long trip;
oil change, which allows you to save, does not take much time;
minor repairs that allow for the qualifications of the owner.

Inspection pit in the garage

It is more convenient to enter the cellar from the pit, as this will allow several steps to be concreted instead of using a ladder.

Cellar under the garage

The main nuances of these designs are:

swelling of clayey soils is harmful to underground structures;
therefore, all elements of the pit and cellar are insulated with expanded polystyrene outside;
in the underlying layer before concreting, backfilling the sinuses of the pits, sand or crushed stone is used;
along the perimeter of underground structures at the level of the sole, drains are laid to collect and drain water.

The width of the pit should allow the driver to enter it without lighting.

Lighting and ventilation

In garages, parallel lighting circuits are more often used. One lamp allows you to use a specific area, several devices are turned on during major repairs, visiting the cellar. The minimum power consumption is ensured by LED lamps. Daylighting devices have a great resource.

In cars, poisonous, harmful fuels and lubricants are used, therefore, do-it-yourself devices for ventilation of the garage, allowing you to create air exchange, become relevant. The inflow is organized from below:

garage - air vents in the masonry, protected by gratings;
cellar - a pipe from the garage or from the street.

Ventilation of the garage and cellar under it

The hood is mounted under the ceiling of the cellar, the roof of the garage, or has the form of vents in the main walls at the highest points.

Related article:

Do-it-yourself garage ventilation. From this publication you will learn why garage ventilation is so important, what air exchange schemes exist, and the nuances of installation.

Other helpful ideas

Useful accessories for a garage with your own hands can be made from used utensils, inventory, materials left over from construction. For example, by gluing the lids of plastic cans horizontally / vertically, the owner gets a convenient transparent utensil for tooling or hardware, which is always at hand.

Device for storing small parts, tools, hardware

Interesting PVC pipe screwdriver storage rack

Homemade machines

From a power tool, you can assemble homemade machines and accessories for the garage:

drilling - a drill fixed with clamps in a device moving a gear along a rail;

Drill boring machine

detachable - similarly clamped angle grinder with equipment for metal or wood;

Cutting machine from angle grinder

wood lathe - headstock from a drill, back from a chuck, fixed on a frame made of a square tube.

Drill lathe

The advantage of the machines is a more accurate positioning of the tooling relative to the workpiece. The equipment turns out to be collapsible, the drill and angle grinder can be removed and used as intended.

Related article:

Metal lathe for garage. Machine types, technical characteristics, design, overview of popular models in a special publication of our online magazine.

Hydropress

The simplest design of a hydraulic press is derived from an automobile hydraulic jack. To press out / press in bearings, press / compress parts, you will need to build a frame and a removable movable stop. The frame consists of 4 channels welded to each other. At the top, the structure is reinforced with stiffening ribs (kerchiefs), at the bottom, transverse corners are added, giving the frame stability.

DIY hydraulic press from a jack

The stop is pulled in a normal position to the upper crossbar of the frame by powerful springs. A hydraulic jack is installed between them, if necessary, pressing the stop to the lower crossbar of the frame. The force of the press is regulated by a jack, the dimensions of the working area are selected depending on the size of the workpieces.

And finally, a few more examples of useful things for the garage.

Shelving at the ceiling

Storage pockets for cutting discs made from disposable plates

Device for the convenient use of threads and ropes

PVC pipe trims are ideal for creating convenient storage areas

Convenient pull-out racks for storing tools

Interesting homemade products for the garage with your own hands

The finished "motorhome" over time is overgrown with a large number of tools. Ordinary homemade garage products provide practical benefits without overpayments. Any hand-made machines will not be inferior in quality to factory counterparts. Let's take a look at some of the fixtures.

Knife sharpener

So, a useful device gets a hole for the stem in the bolt. The stem is made by hand from a thin wire. The thread is made according to the length of the whetstones.

A bar clip can be created from:

organic glass;
ebonite;
saw clamp.

The upper part of the plate acts as a clamp. The surface with two drilled holes is applied to the bed. Then a common through hole is made closer to the knife. A thread is cut in the bed.

So, a self-made device with your own hands is almost ready. The second hole is made only on the plate farther from the knife. Then cut the thread for the bolt (needed for tightening). A simple DIY garage mechanism allows you to sharpen your knives in the field.

A block made of artificial diamonds is affordable and very durable.

Pulley for adjusting the speed and load on the machine motor

metal;
textolite;
plywood (something between wood and metal).

One small and two larger circles are cut in plywood with a jigsaw. The center of the molds must match the diameter of the shaft. So that there are no problems with further manipulations, the circles are glued together or sit on the screw and tightened with a nut.

The parts of the useful device are tightened with screws. Then the pulley should be processed with sandpaper or a file, placing the structure on the drill chuck. The finished piece of the machine can be additionally rolled.

Avoid vibration and keep the center of gravity on the pivot.
You can make a gear pulley. Small tubules are made near the central circle until all stages of assembly.
If necessary, a small pulley is made from a thick piece of plywood (one circle). A groove is made in the mold, the part is pushed onto the screw. A narrow file is applied to the rotating wheel.

DIY vacuum forming of plastic sheets

upper and lower frames;
molding plastic;
tie bolts;
perforated MDF;
opening for the discharge chamber;
plywood base with a hole in the middle.

A hole is made in a piece of MDF or plywood (50 by 50 cm) for a PVC pipe with a three-inch diameter. A frame of beams (30 by 30 cm) is attached to the resulting base with glue. To obtain tightness, all cavities are sealed with a sealant.

The edge of the water pipe is glued to the base with one end, and the other is attached to the hose of the vacuum cleaner. The whole structure stands on its legs.

Certain holes are cut in the upper and lower frames to accommodate the vacuum chamber frame (firmly glued to the base). Along the frame perimeter, cavities for fasteners are made at an equal distance.

Types of thermoplastic plastic used:

DIY jigsaw

A steel square with a bolt soldered into it is made by hand as a file holder block.
The redesigned block is soldered to the old saw holder.
Attention is paid to the desktop. Plywood is chosen as the base. The narrow table area is the same size as the jigsaw.
Furniture legs are mounted in the front plane of the table, a small wooden stand is fixed to the back plane of the working area.
Use only hardwoods to create the leverage.
The lever hole needs to be created with a slightly larger diameter of the stud (it regulates the spring tension).

The described self-made craft should stand on a "sole" that will not interfere with the work process. If necessary, cut a corner in the baseplate area.

A set of cutters for artistic turning with your own hands

A semicircular grooved chisel-cutter is used for rough turning. The part is made from tool steel strips.

The universal cutter is used for finishing parts. The tool is made from standard straight chisels.

Shaped cutters:

chisel scraper.

a tool based on a straight chisel with one-sided sharpening levels the surface of cylindrical workpieces;

a homemade fixture helps to thread and apply decorative marks on a wooden rod.

The cutting tool for soft wood (aspen, linden) has a smaller sharpening angle compared to the sharpening angle of the device for processing boxwood, oak, birch.

Homemade extension cord with two sockets

The "branded" extension reel is made of two plywood discs, which are bolted together. The fragments are separated by a duralumin tube and washers.

On one side of the reel, the bolts are recessed so that contact with the handle is without injury. On the other side, at a certain distance, two holes are drilled for the sockets. The socket boxes are fixed with screws.

Proper storage and use of the tool

Each pipe is fastened with a plywood plate with self-tapping screws through a slot. To prevent the pipe fragment from loosening during operation, pieces of glazing beads are glued under the sides of the holder with PVA glue.

When it is necessary to hang the holder on the garage wall, the handle is inserted into the holder tube. The handle stand fits snugly into the slot and is fixed. With this additional equipment, the coil is mounted on the ceiling or on the bottom of the shelves.

To make the extension bar easy to rotate, a small handle is mounted on the edge of the device disk, which consists of tubular segments of various diameters. The larger diameter pipe is slipped onto the smaller hose and fixed firmly with a flat screw.

DIY homemade products for the garage: the best ideas with photos

Useful homemade products for the garage with your own hands

Most often, during the initial arrangement, all the necessary furniture is ordered. But if you rent a room or do not want to take money out of the family budget for this, then you can easily settle down on your own, especially if you know how to hold basic tools in your hands. To help yourself and for inspiration, you can use the video from homemade products for the garage with your own hands (YouTube can please you with a variety of ideas), or you can take into account the tips for arrangement, which will be the basis for a successful layout.

If you look at a photo that demonstrates the optimal set of useful furniture elements, then note the useful nuances for yourself. First, the location of any storage system should be located at a certain distance from the walls. It is believed that there should be at least half a meter between the machine standing inside the room and the rack for normal, comfortable work inside. If the shape of the storage of your car is more like a rectangle than a square (this happens quite often), then it is worth moving the entire storage for tools and useful things into one zone along the far wall opposite the door. It is here that you can place with maximum convenience not only a table or a rack, but even a carpentry or lathe. It is not superfluous to mention that all the storage of your tools should be placed inside the garage only if it is securely closed or is protected by a tightly closed gate in the country. Otherwise, it is better to place there only the most necessary, preferably not of particular value to the robbers.

If you envisage installing windows with your own hands in a separate room, which is located on the territory of your suburban area, then it is better to make them of the so-called attic type, that is, located in the roof, and, moreover, choose a place just above such a working area. In the summer and spring, such an arrangement of windows will help you save on lighting, there will be enough sunlight for all types of work, besides, you can also ventilate the room, because ventilation cannot always cope normally, especially if you are going to study inside. like in a workshop.

With a total shortage of money or out of love for art, you can make an original storage system using old empty canisters. Every motorist accumulates a lot of them over the course of a year, and if you ask fellow neighbors, there will be enough for each compartment of such an interesting locker. Of course, there is nothing difficult here, and for performing such homemade garage do it yourself video-the lessons are not needed at all. You need to take a plastic canister, wash it well so that no traces of its contents remain. Armed with scissors for metal, a knife or other tool, we cut off the front cover from the canister, but so that the sides remain, and the contents do not overflow. To make the structure more stable, you can fix it on the back wall with self-tapping screws, but we will, of course, not drive them into the wall, but into a wooden rail, which we attach to the dowels.

Homemade garage do-it-yourself photos

The same option, as shown in the photo, can be used in homemade products for a summer residence, because there, too, often you need to equip a workshop, and even less space is allocated for it than it remains in the garage. For such a design, you will need to build a frame of wooden planks, and make notches along its upper and lower edges, where the cells will be inserted. Most likely, the inspiration for this design was the classic hives that are used for breeding bees, the system is exactly the same. Sheets that are inserted inside have a perforated surface and the presence of these small holes will allow you to screw nails inside, hang hooks in order to hang tools and useful devices as conveniently as possible so that they do not fly off when sliding in and out.

The exact same perforation can be incorporated into a furniture set. With such a complete set of everything you need for a home craftsman, you can build many useful homemade products for the garage with your own hands, video with which there is on the network. In terms of popularity, such resources may soon overtake popular hand-made projects, because men, no less than women, want to make the space around them, their kingdom, beautiful, functional, and comfortable.

Interesting DIY homemade products for the garage

We are accustomed to either just throwing away the worn-out tires, or making crafts from tires for the garden with our own hands. Having examined the last winter set for a swan or a flowerpot, this year you can easily allocate it to yourself by making a whole furniture set. Frankly speaking, for this purpose, you will need not only car tires, but also bicycle tires, because they can be used to design backs by turning a stool into a chair.

Practice making such furniture and soon you will be able to replace your coffee table with such a table in the living room with your own hands, crafts from tires look not only beautiful, but can also become part of the original design concept.

A table and chairs are great, there will be where to sit, but with the question of what to cook a delicious shish kebab, our next idea will help here. The fact is that an ordinary folding brazier may not maintain the required temperature of the coals for a long time, and if you like to sit near the fire for a long time, you should make something larger. We will modernize crafts from a wheel for a garden and present to your attention a brazier made on the basis of a wheel rim. In order for the rim to maintain the set temperature well and not let the coals cool down, it needs to be lined with bricks, but for the maximum decorative effect of such a homemade product, it is better to file them a little with a grinder to fold them in a circle. The bottom must be covered with any available material that does not support combustion, for example, fine crushed stone.

Homemade garage do-it-yourself drawings

If you plan to spend a lot of time in your impromptu workshop, then among those you are interested in homemade do-it-yourself garage - heating, lighting, ventilation, that is, the arrangement of a full-fledged comfortable stay inside for a long time. Some people prefer to install infrared heaters, but from the point of view of the cost of electricity, this will not be a very rational option. Hot water heating can be a good option, but it is best designed in garages that are located next to a residential building.

You can place solid fuel boilers of any design inside a garage of any type, even make your own stove-stove made of metal using a welding machine. But do not forget that with this type of heating, the interior decoration must be made of non-combustible materials, and the ventilation is done with high quality, even at the stage when we build the roof with our own hands in order to timely remove all combustion products from the room.

DIY homemade machines for the garage

If you have a need for some specific work, then you can use special machines, for example, a pipe bending machine, which can be useful not only for motorists, but also for motorcycle owners.

DIY garage attachments - make a home workshop out of a caravan!

Required tools and materials

Any car enthusiast is able to make a variety of garage accessories with his own hands, using inexpensive materials and the simplest tool. Such homemade homemade craftsmen turn the motorhome into a full-fledged workshop.

Garage workbench - hard to do without it!

If you plan to self-service your vehicle in the garage, as well as perform a variety of repairs and make your own crafts, it will be difficult to do without a workbench. It is usually made from wooden planks, which are mounted on a reliable base (metal profiled pipe or thick wooden bar).

It is allowed to make a work table from metal blanks. They can be easily cut to the required dimensions and assembled into one solid structure by means of steel corners and hardware (universal screws, screw connections, bolts, and so on) or using a welding machine.

The manufacture of a wooden or metal workbench always begins with drawing up a detailed design drawing. You must correctly assess the working space of your garage and fit the desktop into it as harmoniously as possible. It is advisable to provide for the presence of shelves and drawers (pull-out) on the workbench. They allow you to keep all kinds of tools close at hand. It is recommended to install a small vice on the countertop.

Making a metal workbench

If your garage has shelves or racks (or you want to mount them), experts advise installing a workbench next to them.

Then you will get an excellent work area where you can do any homework, producing original and useful homemade products for your home.

Assemble a tabletop from boards with geometric parameters suitable for you (for example, 200 x 10 x 5 cm), connecting wooden products to each other with metal ties and good glue. For a standard workbench, suitable for any garage, 20 of these planks are sufficient.
On the tabletop, make special grooves (on 5 and 16 boards in a row) under the stops. The parameters of the grooves are 2.5 by 2.5 cm.
After the glue dries, the worktop must be planed so that a perfectly flat work surface is obtained.
From 80 x 10 x 10 cm bars you make legs for the workbench. Grooves should be provided in the front supports. You will insert the brackets into them, which you then connect to the beam (longitudinal).
Assemble the base of the underframe from two frames made of 10 x 5 cm boards and fix it to the support. The frames are cut into the legs of the workbench by about 2.5 cm, and then they are fastened with bolts.
Attach the supporting walls (back and side) to the resulting structure. They can be made from centimeter plywood or chipboard sheets.

Now you need to connect the top frame to the table top. This operation is carried out without any problems using the bolts. Do not forget to apply drying oil on the made wooden workbench and varnish it. On such a table, you will make any crafts with special pleasure!

Shelving is a must for a garage!

Over time, any vehicle owner turns into a kind of warehouse where a variety of items and tools are stored. All of them need to find a comfortable place so that each device is easy to find. A do-it-yourself rack allows you to efficiently organize the storage of tools.

You can make such a structure out of metal and wood. In the latter case, use a solid wood - beech or oak. Shelves and drawers from them are able to withstand quite serious loads. The rack, according to the accepted standards, is obliged to maintain a pressure of at least 150–160 kg. At the same time, it is not recommended to load home-made structures with things that generally weigh more than 500 kg.

Shelving made of wood

Let's see how you can quickly make a garage rack, spending a minimum of money on the purchase of materials. The work flow chart is as follows:

Take a 9 cm wide board and cut it into pieces of different sizes (18-30 cm). We will use these pieces as supports for the rack.
Make the shelves from a more powerful board - 19 cm thick. To do this, you will need to saw it into pieces of the desired length.
Mark the board for the base of the structure, indicating on it the points for the location of the spacers (they are usually removed from the edge of the base by 2.5-3 cm). Now you need to attach (preferably using construction glue) the top spacer and nail the top shelf of the rack to it (with ordinary nails of suitable sizes). Then repeat these manipulations with the other shelves and spacers. Lastly, the lower spreading element is attached.
Turn the assembled structure over, tighten the base of the rack with the spacers using screws.

The facility for storing various tools and things is almost ready. You just need to sand the rack and then apply oil varnish to the wood (it is better to make two layers), and then attach the homemade structure to the wall with anchor screws. The racking attachment points to the wall are under the lowest and highest shelf.

Useful technical homemade products for the garage - press and cyclone vacuum cleaner

A homemade clamping device, which is sometimes impossible to do without in home art, is done very simply. You will need:

hydraulic jack;
metal platform bed;
profile pipes with a cross section of 6x6 and 4x4 centimeters (each will require two pieces).

The press is done in this way:

Attach two vertical guides (4 x 4 cm pipes) to the base of the structure.
Weld between them (at the very top) a piece of pipe 6 by 6 cm.
Install another 6 by 6 cm pipe so that it can easily move along the mounted guides.

Homemade garage press

The use of such a technical homemade product is elementary - you put the products that you want to connect on the working surface of the press, cover them with a thick plywood sheet, lower the jumper pipe with the jack placed on it. You only need to pump pressure into the jack to glue two products or your own crafts for centuries.

But with the help of the next home-made product - a cyclonic vacuum cleaner, you can always put the perfect order in the garage. It is made from a dense plastic or (which is better) from a metal container. It must be sealed. The scheme for making homemade products for effective garbage collection in a motorhome is as follows:

Make two holes in the lid of the container. Place the first at the edge, the second in the central part. The diameters of the holes must match the cross-sections of the hoses that you will connect to the device. One hose is supplied to the hole from the edge, it is designed to collect debris, the other is needed to connect a conventional vacuum cleaner.
In the inlet pipe of the described homemade product, you need to install a plastic elbow. It will ensure the process of swirling (cyclonic) air in the tank. Due to this knee, the efficiency of such a homemade product increases, which will easily and quickly suck in small stones, lumps of dirt, sawdust and other solid contaminants. They will all collect in the tank that you connected to the vacuum cleaner.

Tool for making strong rope from plastic bottles

When heated, the material from which bottles for mineral water and various drinks are made is able to shrink. This gives us the opportunity to make an excellent rope out of such containers. With its help, you can very tightly connect a variety of parts and assemblies in a motorhome and in general in a household.

Rope from a plastic bottle

To make a device for making homemade cords, you need to stock up on two bolts with washers and nuts, metal washers, a piece of thin board or plywood, a stationery blade and an electric drill. We do the device like this:

Place two washers in the middle of the board or plywood, mark their centers.
Drill holes in the marked centers with a drill.
Drill holes from the back side (this is a mandatory procedure to ensure that there is no twist or rotation when using the device).
Screw in the bolts.

The use of such a craft is simple. It is necessary to put several washers on the protruding sections of the bolts (their number determines the thickness of the rope to be cut). Then a clerical knife should be placed on top of the washers (you can even use a piece of it) and strengthen the structure by installing a few more washers and tightening the nuts all the way. After that, the homemade device must be fixed with clamps on a garage workbench or other work surface.

Next, we take a plastic bottle with a volume of two liters, cut out the bottom of it, cut a strip (very small) of the required length and set our "blank" under the knife. Pull the tape with one hand, while holding the container to be cut with the other. From one bottle of 2 liters, you will get about 25 meters (linear) of excellent rope with high shrink characteristics.

Under the tool - useful homemade products for the garage with your own hands

I live in the city of Veliky Novgorod, our plant for the production of tanks, they produce drainage EP and EPP. For any city, this is a very useful thing. Since these drainage units are needed to drain oils, oil, fecal waste. On the site, I learned a lot of useful information, quality, dimensions, purpose of drainage tanks. The NOVZERO company provides us with various containers for water towers, air collectors. You can order everything in Veliky Novgorod, there are numbers for orders. Also, this company provides a guarantee, services, such as installation of equipment and more. Each city should have such factories and such products. novzero.com www.novzero.com/produktsiya/emkosti-ep-i-epp

No. 15 Homemade accessories for the garage

DIY garage accessories

DIY garage gadgets #tool

Homemade machines. DIY machines

Do-it-yourself things # 8 you can't do without in your garage

DIY hydraulic press

No. 15 Homemade accessories for the garage

Under the tool - useful homemade products for the garage with your own hands

DIY garage accessories

DIY accessories for home workshop and garage

Homemade Garage Accessories, ROLLING JACK

In today's story, we will introduce you to several tips and rational recommendations for arranging garage parking space, which will help cottage owners save square meters and things.

Let's take a look at 10 easy DIY ideas for.

You can easily and quickly mount some of the wire containers on the wall to store various things in them. The rational arrangement of balls and hoses is another simple way to organize all objects and products that can easily create chaos and dust if they are not separated into compartments and containers.

2. Plates and inscriptions

It can be stickers or complete painting of doors and cabinets. unusual furniture coated for special marking. They will help family members navigate the garage space, and also store items and products in a specific place. The main advantage of this decoration method is the speed of implementation, which will only take a few hours!

3. The magic of magnets

For small tools and drill bits, you can use magnetic stripes on a free wall area. On them you can hang small parts and devices that will always be at hand. It is a simple way of practical organization of premises and storage systems, and also extremely easy to implement.

4. Original hooks

Take long-unused keys and turn them into hooks for wall decor and as an original authentic accessory. On them you can hang work clothes, ropes and everything that should be in easy access.

5. Banks and other containers

You can organize and separate the nuts and bolts by adding some plastic containers to the toolbox. This will make it much easier for you to find the part or element you need. All products will be sorted and placed in certain containers, and for added convenience they can be attached to a wooden shelf.

6. Patch panel or board

Of course, you can always put a perforated typesetting field, where you can easily add some new hooks and organize the space in a new way in decorating your home. Moreover, such an organizational idea can act as a "transformation" of a wall for a garage box! Tips and tricks for using this multifunctional device can be found on the Internet portal Small Interiors.

7. Practical buckets

Some shelves and a large set of segments (stickers) can really come in handy. This is another quick way to create a functional and rational area for placing items that add a distinctive style to Interior Design and will help keep order among working tools.

8. Bungee balls

The use of spring cords for storing equipment for a variety of sports is a wonderful conceptual idea for transforming the space. You can place both footballs and basketballs in these stylized nets! They are commercially available and extremely easy to install.

With this creative smart layout idea, there’s absolutely no excuse for kids not wearing helmets during class and after school on bike rides and rides. After all, now you need to contrive not to find them in a specially equipped place! Complement wall decoration small hooks on which these safety devices will be located.

Instead of tossing water bottles and cardboard boxes in the corner of your garage, build a quick and easy-to-make waste station for the whole family. It can be built using plastic boxes and boxes with inscriptions that allow you to sort waste into plastic and iron.

We have presented to your attention an interesting and extraordinary selection of conceptual ideas and creative solutions for organizing a garage space in an unusual house.

Did you like these rational and practical ideas? Share with us your opinion on this issue in the comments below ...

Categories:
Places:

From time immemorial, a storage room for a car was considered not only a place to relax after a hard day, but also a unique workshop. Men equipped it, creating various homemade products for the garage with their own hands. On the territory of a small space, you need to arrange a huge number of things for convenient use and safe storage. Enterprising craftsmen do not lag behind their ancestors, but continue their work, using modern methods and technologies. Consider the popular ideas of original designs for the work area of real men.

When arranging a room for parking a car, it is necessary to observe the basic safety rule. An entrance gate or door must be easy to open and the passage to it must always be free.

Garage DIYs - A Wise Approach to Space Retrofitting

Almost every car enthusiast will be able to equip a "house" for an iron horse with his own hands. The main thing is to tune in to the fact that this is an ongoing and long-term process. It doesn't hurt to connect creativity, skill, and firm determination to achieve your goal. Practical advice from experts will help you create original homemade products for the garage, for those who are ready to get down to business. In addition, it brings tremendous satisfaction when ordinary objects turn into a necessary and valuable thing.

Car tire storage

Experienced drivers change the “shoes” of their car every season. Where is the best place to store tires so that they do not lose their properties? A simple DIY homemade garage solution will forever solve this sore point.

For the correct storage of tires, the type of wheel design plays a key role: with or without a disc.

Car tires mounted on disks are stored suspended or in stacks. For the first option, simple materials are used:

metal cables;
chains;
luggage belts.

Often they are fixed to the ceiling, load-bearing wall, or to a beam located in the upper part of the room. An original craft for a garage with your own hands is hammering metal hooks or pins into the wall. They are stuffed over the entire area of the wall, the main thing is that the wheels do not touch each other.

Metal pins should not protrude beyond the edges of suspended structures.

Car tires without rims are stored "standing". Suitable shelves are made for them, welding profiled pipes with a diameter of 30 mm or a corner. The width of the structure is 4 times the width of the wheel, plus 15 cm for free placement on the shelf. The height of the rear of the structure is 10 cm higher than the outer volume of the tire. Such a do-it-yourself garage device is hung on the wall.

The storage area for tires must be protected from sunlight to prevent the rubber from deteriorating.

A good owner has everything at hand

To equip a working area in a garage, experienced drivers first determine where to place it. If the room has a rectangular shape, then it is convenient to build a "corner for creativity" along the entire width of the back wall.

Such a useful hand-made device for the garage will help solve three main problems:

compact arrangement of a large number of things;
ease of use;
free movement in the room.

For a wide garage, it is better to place the structure along one of the side walls or as a corner option. In this matter, the garage owner independently makes a decision based on the size of the room.

A great idea for a garage is to DIY a wooden table or workbench. The construction will require:

profiled pipe or metal corner;
boards;
moisture resistant plywood or chipboard;
fasteners;
set of tools.

With the help of welding equipment, the frame of the future table is made, which is sheathed with plywood or chipboard. Alternatively, the structure can be made entirely of wood. In order to compactly fill the space, shelves are installed under the tabletop, where plastic or wooden containers are placed.

In addition, the craftsmen use various tricks in the garage - they build a rack from plastic canisters with their own hands. The same containers will do with the handle at the top. One of the sides is cut out, turning the canister into an original box for the motorist's valuables. Then the containers are placed on a wooden or metal rack, as shown in the photo. These garage storage systems have served motorists for many years. Since plastic is not afraid of dampness, temperature changes and is resistant to mechanical damage. As a result, the wise master has all the details at hand, which means he works without distractions.

Folding table for small spaces

A simple structure that can be made from an old cabinet will help to equip a work area in a small garage. The construction will require:

chipboard sheets;
corners;
several loops;
mortise nuts for furniture;
wooden block;
self-tapping screws;
anchor bolts.

First, mark up the future structure using a level. Through holes are drilled on a wooden block and attached to the wall using anchor bolts. Then the prepared table surface is connected to it with the help of moving curtains. The design fits wonderfully into a small room and is used only when needed.

Ideal place for tools

Each driver has an arsenal of tools available. Some of them are used quite often, others - once a year. Original homemade garage fixtures are a simple solution to the problem. They contribute to the perfect order in the room, as well as decorate its interior.

Organized people who put everything in their place can use the closed boxes for tools and car parts.

One of the devices is performed in a simple way. A metal reinforcing mesh (cage size 10 cm), which is made of wire (diameter 2 mm), is attached to the wall. Some parts of the cage are bitten off, then folded back and made into hooks or crossbars.

Motorists hang on them:

hand saw for metal;
a watering can for fuel;
various rubber hoses;
small car spare parts.

Another way of completing valuable tools for car enthusiasts is a screwdriver rack. For this, the board (approximately 15 cm thick) is carefully sanded, bringing the surface to a smooth state. Next, holes of different sizes are drilled (one or two rows). Each of them is cleaned to exclude the appearance of splinters. Attach the structure to the wall using brackets, after which screwdrivers or chisels are inserted into the holes. A similar device is made for storing hand tools. A board is nailed to a vertical surface. One of its sides is first cut down so that it is convenient to hang pliers, various types of nippers and pliers.

A special shelf is built to place the battery equipment in the garage. Its upper part has a flat base. At the bottom, projections of various formats are cut, where suitable parts of cordless tools are placed. This approach allows the car enthusiast to quickly find the right things, especially in critical situations.

Portable lighting systems

As you know, there are no windows in the garage. During daylight hours, light enters in only through a door or gate. When repairing the underside of a car, it is very difficult to do without. Experienced motorists are advised to make a portable lamp.

Creating the simplest design, they take an ordinary cartridge and connect it to an electrical wire, at the end of which a plug is attached. For lighting, a conventional incandescent lamp or "housekeeper" is suitable. The main thing is to fit under the cartridge.

To protect fragile glass, you can make a lampshade out of it. A milky vessel of medium thickness is suitable, which perfectly diffuses light. The design is used to illuminate the most secret parts of the car and distant parts of the room.

Compact electric drill stand

When performing various works in the garage, they are often used. The tool needs to be treated with care, so keep it in a safe place. In addition, it is easier to drill holes on a flat and stable surface without distortions. The original stand for an electric drill is easy to make, if you heed the advice of experts.

To begin with, collect the main components of the structure:

flat area of the old milling machine;
calibrated tube or rod;
plywood sheet.

A box is made of thick plywood, which corresponds to the size of an electric drill. Two holes are made in it with a drill. Next, the drill is attached to the box using special nuts. The structure is installed on the rack towards the base. A handle is fixed at the top of the rack, next to the bar. A standard ruler is installed along the base, which serves as a limiter for the unit. In this position, it is much more convenient to work with a drill. The holes are smooth and without visible deviations.

The do-it-yourself useful things for the garage shown in the photo vividly testify to the skill of modern motorists. The main purpose of arranging a car house is the rational distribution of the working area and the convenient placement of valuable things. Thanks to this, it will be comfortable to work in the garage, relax and even chat with friends.