How to make slime without glue new recipes. How to make a slime at home

A slime is a stretching, spreading toy that can take any form, stretch and flow smoothly from one hand to another. Such a thing is sold in children's stores with toys, but you can do it yourself. In this article we will tell you how to make a slime using PVA glue in combination with other ingredients. The most popular ingredients for lizun in combination with PVA glue are shampoo, soda and toothpaste. Making these fun toys at home is profitable and fun. You will be able to adjust the color, elasticity, transparency and making this an exclusive thing.

The history of the origin of lizunov

The initial interest in this toy appeared in the 1990s, when the animated series "Ghostbusters" appeared on television boxes. The first hero, who became a green slime ghost.

In general, this toy was made back in 1976 under the leadership of Mattel. The composition included components of guar copper, minerals, borax, which make the toy mucous and tight. But a substitute for all these chemical elements appeared - PVA glue. That is what we will use.

How to make a slime from PVA glue and shampoo

There are a lot of recipes for making this toy. Take the most popular. Based on the recipe, in order to make a lick with your own hands, you need only three components:

shampoo;
pVA glue;
food coloring or gouache;

Mix these components in a ratio of 3 to 1. Three parts - glue and one part - shampoo. In order for the lick from PVA glue and shampoo to get saturated, you can add a pinch of bright dye.

What glue to use for lizun? It is advisable to choose to choose transparent, and among them Titanium is popular, since it contains all the necessary properties to give softness and elasticity.

It is worth considering that elasticity depends on the amount of glue, that is, the more glue, the more it is elastic.

How to make a slime from PVA glue and toothpaste

There is also a recipe for lizun from PVA glue and toothpaste. It needs only two components:

pVA glue;
toothpaste.

Mix half a pack of toothpaste with one tablespoon of glue until smooth. Glue should be added if the toy has not reached the proper consistency. Put in the refrigerator for 15 minutes. The toy is ready for use.

Do not let the smell of toothpaste frighten you, it will disappear soon.

The toy actually turns out 2 in 1, since in the cold it can be used as an anti-stress toy, to cheer up, and at room temperature as intended, like a slime.

There is another recipe using toothpaste, but without the use of glue. Put the paste in the microwave for 2 minutes, then remove, mix and back into the microwave. Repeat this procedure three times. After cooling, apply sunflower oil or body oil to the hands, knead the mass for 2-3 minutes and you're done.

How to make a slime from glue PVA and soda

There is a wide variety of recipes using two main components, such as PVA glue and soda, and we will consider the two most popular.

First recipe

So, in the first case, you will need:

pVA glue;
baking soda.

Pour glue into the container, give it a color, adding dye. Pour 30 g of soda into another container and fill it with a glass of hot water. When the water with soda has cooled, pour this solution into the glue. Then we collect it from this liquid, so that it does not stick to the hands, additionally dip it into the solution. After that, the soda and PVA glue slime is ready for use.

Second recipe

For the second recipe you need:

“Miracle clay” (with polystyrene foam);
pVA glue;
baking soda.

In the “miracle clay” we pour hot water, mix, separate the liquid from the foam balls. After that we add glue there, mix.

Glue needs to be poured over the walls of the container so that there are no bubbles in the lick.

In the second tank we connect the soda with hot water, cool. Then we connect two containers and mix for about 1-2 minutes.

Divide the mass into containers, paint in different colors. Leave the containers open for 15-20 minutes and then you can enjoy the transparent colored slimes.

How to make a lizun - 10 ways to make at home

4.4 (88.89%) 540 votes

Many children really like the game with a lizun - a simple entertainment for any age. Lizuni toys became popular after the release of the cartoon about the adventures of ghostbusters, one of the heroes of which was Lizun - a constantly changing shape, spreading and stretching strange creature. Another name for this toy is handgam. How to make a slime at home, and we will learn today

Lizun - great fun for kids

Lizun is not only an excellent entertainment for children, but also helps to relieve stress, has a beneficial effect on the nervous system, helps to develop small muscles in the arms and motor skills. The toy has a gel-like consistency, does not melt and can take the most bizarre shapes. You can buy a lizun at any children's toy store, but it will not be difficult to make it yourself or with the help of a child at home. Making a lizun does not take much time and does not require the availability or purchase of expensive materials, tools. Consider the affordable and not very complex options for creating this interesting toy.

How to make a slime at home

If there are children in the house, there will certainly be plasticine. Use it to make a popular toy - the result will be impressive!

plasticine - 1 pack:
food gelatin - 1 pack;
spatula (spoon) for mixing components;
capacity (bowl, jar) for kneading;
iron containers for heating gelatin.

Cooking method:

Pour gelatin into an iron container and fill it with cold water. Mix thoroughly and leave for an hour. After the specified time has elapsed, we heat the soaked gelatin, bring to a boil and quickly remove the dishes from the stove.
We take a container for kneading (it is better if it is plastic) and, using a spatula, we very well knead soft plasticine (100 g.) With water (50 ml).
Gently pour the prepared gelatin into the obtained plasticine mixture, mix with a spatula until a homogeneous, plastic mass is formed.
The container with the resulting mass is placed in the refrigerator and wait for complete solidification.
We take it out of the refrigerator and use it for its intended purpose!

Video on how to make a plasticine slime

This method is a godsend for those parents who, when choosing toys, first of all put maximum safety, full environmental friendliness of materials for manufacturing in the first place. This option is also ideal for the smallest fans of games with a slime.

Necessary materials and tools:

warm water;
starch (potato or any other);
container for mixing components.

Cooking method:

We put warm water and prepared starch in equal proportions into prepared containers.
If we want to get a multi-colored toy, we add a small amount of food coloring, green stuff, a solution of potassium permanganate or other coloring substances that are safe for children.
Thoroughly knead the mass until it becomes plastic and elastic. It is better to knead with gloves to prevent staining of the hands.

Such a slime will stick perfectly to surfaces of any type, but it also has a drawback - it is not able to bounce and spring. So before manufacturing it is better to ask the future user whether his characteristics and possibilities of environmentally friendly starch slime will suit him.

The house has recently been renovated and there are remnants of construction glue? Using the available components, we turn them into a toy for children!

Necessary materials and tools:

shampoo;
construction glue ("Titan", "Ecolux" or another);
food coloring;
dense plastic bag;
container for mixing components (plastic bowl):
spatula or stick for mixing.

Cooking method:

Pour a small amount of shampoo into the prepared container.
We pour construction glue into the shampoo - it should be more than shampoo.
Add a drop of food coloring (if saturated color is needed, more coloring will be needed).
Thoroughly mix all the components with a plastic spatula or stick.
Pour the mixture into a plastic bag.
Carefully knead the mass in the bag so that it evenly stains and turns into a plastic substance.
We take out the slime from the package and can immediately play with it!

Keep a toy prepared in this way in a sealed container in the refrigerator. After playing with a shampoo and glue lizun, the child should wash his hands well.

This method will require the purchase of specific ingredients. But believe me, the result is worth it!

Necessary materials and tools:

any food coloring, brilliant green, iodine, gouache paints;
pVA glue, always fresh, in an amount of 100 g .;
a solution of borax (4%) or borax (sodium tetraborate) - you can purchase these components in a pharmacy, specialized stores selling chemicals.
water;
a jar or a glass;
a bag of polyethylene for kneading.

Cooking method:

Take water at room temperature (approximately 1/4 cup).
Slowly pour PVA glue into a container of water, gently mixing. If a firmer slime is required, take a little more glue.
Now it's time to add sodium tetraborate - if a solution is used, then one bubble is enough. Pre-dilute the powder in water based on: a tablespoon of borax per 100 ml (half a glass) of water.
While constantly stirring the mixture, carefully add the dye.
We transfer the resulting mass with dye into a bag and knead well until it turns into a slime of proper consistency.

The slime prepared in this way is practically no different from a store toy.

Video on how to make a slime from pva, sodium tetraborate and water

Any housewife has soda in the kitchen, why not use it to make a slime? Just a few additional ingredients - and the original toy for the child is ready! the only drawback of such a slime is its fragility, the toy from soda will last only a few days.

Necessary materials and tools:

baking soda - a tablespoon with a slide;
pVA glue - 50g .;
warm water - 1/2 cup;
food coloring - a few drops;
spatula for mixing components;
plastic containers - 2pcs;
latex gloves.

Cooking method:

In a plastic container, dilute PVA glue (50 g.) In warm water (1/4 cup).
Add a few drops of dye to the water with glue.
In a separate bowl, mix soda (tablespoon) with warm water (1/4 cup).
Slowly pour the soda solution into the water-glue, stirring constantly, waiting for the mass to compact.
Thoroughly mix the resulting substance - this is the slime!

To prepare such a lizun, liquid washing powder will be required; replacing it with dry is not recommended.

Necessary materials and tools:

washing powder (liquid);
pVA glue;
dyes;
latex gloves;
a bowl for preparing a mixture of components.

Cooking method:

Pour glue into the bowl (about a quarter cup is needed).
Add a few drops of dye and mix well.
Now pour liquid detergent into the glue with dye - about 2 tablespoons, stirring constantly.
Put on gloves and continue to knead the mixture with your hands (like dough). According to the consistency, the mass being kneaded should look like soft rubber, stretch well and take various forms.

Didn't find starch in the house? No problem! It is completely replaced by ordinary flour - be sure to sift it before use, so as not to get lumps that can ruin the slime.

Necessary materials and tools:

water (hot and cold);
any food coloring;
flour (grade does not matter) - about 2 full glasses;
utensils for preparing a mixture of components;
spatula or spoon.

Cooking method:

Sift flour through a fine sieve into a mixing bowl.
Add cold water (1/4 cup), mix well.
Add 1/4 cup of hot water (but not boiling water!).
Knead the mixture until it thickens.
If you want, add dye.
Send the mass to the refrigerator, where it will spend 2 hours.

When the specified time passes, take it out of the refrigerator and give it to the children for tearing - they will appreciate the quality and functionality of the resulting toy!

A toy prepared according to this recipe will more resemble a jumper than a lizun, as its consistency is much denser.

Necessary materials and tools:

hydrogen peroxide (ordinary pharmacy);
water - 100 gr.;
pVA glue - 100 gr.;
soda or starch - 100 gr.;
container for mixing ingredients;
spatula.

Cooking method

Mix starch or soda with water in a prepared container.
Pour in PVA glue and mix, after pouring in the dye.
Add a little hydrogen peroxide - the mass will become light, airy.
Continue to knead until smooth, taut.

To prepare this slime, you will need a special alcohol - polyvinyl. In no case should you replace it with medical alcohol or vodka! Also in this recipe is sodium tetraborate already familiar to us.

Necessary materials and tools:

polyvinyl alcohol powder;
water;
sodium tetraborate;
container for mixing components;
scapula.

Cooking method:

Dilute polyvinyl alcohol powder with water according to the instructions, cook over low heat for about 40 minutes. The mixture should be constantly stirred to prevent sticking.
Mix sodium tetraborate (two tablespoons) with one glass of water, achieving complete dissolution.
Strain the resulting sodium tetraborate solution and slowly pour it into polyvinyl alcohol.
If necessary, add dye and thoroughly knead the resulting mass.

Do you want to surprise children by preparing them a slime that glows in a dark room, and is even attracted by a magnet? Proceed!
Necessary materials and tools:

iron oxide;
sodium tetraborate
plain water;
phosphoric paint or dye;
pVA glue;
magnets (neodymium),
utensils for cooking mass.

Cooking method:

Dissolve 1/2 teaspoon of sodium tetraborate in a glass of water.
In the prepared container, mix PVA glue (30 gr.) And 1/2 cup of water. Add phosphoric paint to this mixture (it provides the glow in the dark) or a regular dye to give color.
Pour a solution of sodium tetraborate into the water-glue mixture in a thin stream, constantly mixing the mixture to the desired consistency. As soon as the necessary mass density is reached, stop adding the solution.
The slime is ready, now it is necessary to make it so that it is attracted by a magnet. To do this, smooth the mass and sprinkle with a small amount of iron oxide powder. Knead well so that the powder is evenly distributed throughout the mass.

The slime is ready!

Try to choose the ideal consistency of the created mixture, focusing on your own feelings. A correctly made slime is one continuous clot, a homogeneous mass, moderately viscous and sticky.
If you feel that the mass does not meet expectations, add the necessary amount to correct the situation in larger quantities. If the mass is liquid, dry components should be added, if, on the contrary, it is thick, then dilute the mixture with water or glue.
To give the lizun a more original appearance in the cooked mass, you can add sparkles, pearlescent powder dyes.
Keep cooked lizunov in a tightly sealed container, placing it in the refrigerator.
It is necessary to warn children that it is impossible to lick lizuny, bite them, as if this would not be desirable.
Before playing with lizuns and after, you need to wash your hands well.

Be sure to try making lizuna at home with your children. Bright, original handgam - great fun for the whole family! Have fun and have fun with your kids!

The toy Lizun became popular after the release of the artwork Ghostbusters. She got the name thanks to one of the heroes of the film the ghost, which the hunters nicknamed Lizun.

Scene from the movie "Ghostbusters" 1989. left Lizun, thanks to which the toy lizun became popular among children

The toy quickly gained popularity among children around the world, as a result of which it began to be released on an industrial scale. It can be purchased at the store, but it will be more interesting for children if their parents make Lizuna with their own hands, which can take a variety of forms, spread out, and stretch.

There are many ways to independently make a toy from various materials. In the article, we will consider several common and affordable methods, thanks to which you can give a certain color to the toy and density.

Below, the top 9 ways to make a slime at home are shown. And before you start reading, take a look video from youtubewhich have the most views. We found them like this:

Video 1. 3 slizun from two ingredients

Video 2. Toothpaste slime without glue

And now, let's try to make this funny toy with our own hands. Choose your preferred method:

How to make a slime without glue

If you do not want the child to have a toy that contains glue, then it can be made from other materials.

For example, you can use clay. In this case, the mass can be given any shape that is retained. To do this, prepare:

Plasticine.
Gelatin.

In a metal bowl, dilute food gelatin in water, according to the instructions on the package. Set aside for 1-2 hours. After that, the bowl should be put on the stove and after boiling the mass, remove from heat.

Mash 100 g of plasticine in your hands to make it warm, and mix it in a separate bowl with 50 ml of water, stir and add gelatin. Mix all the ingredients thoroughly until a homogeneous mass is formed and send the lizun to the refrigerator. After a couple of hours, you can give the children a toy.

How to make a slime from PVA glue

Most often, a slime is made from PVA glue. There are many ways, using various ingredients, we will consider one of them. For this we need:

200 ml of warm water.
1-2 bottles of white PVA glue.
Food coloring.
2 bottles of borax (salt of weak boric acid).

Before starting work, you need to shake the bottle with glue, and then pour it into a deep container. An ordinary glass jar is suitable for this. In a separate bowl in water, mix the dye and pour it into a jar of glue. Mix all ingredients until smooth.

Then boric acid should be gradually added to the mass with glue. As a result, the mixture will begin to acquire a viscous and dense consistency. When the necessary ductility and density of the mass are achieved, it must be carefully kneaded with rubber gloves or in a plastic bag. Leave the finished lizun on paper for about 30-60 minutes, after which it can be given to children.

DIY slime from shampoo and soda

Consider another option for making a do-it-yourself slime. In this case, we will use shampoo, so the child should play in the presence of adults. They need to ensure that he does not lick his hands, and after the game he thoroughly washed them with soap. We need to prepare the following ingredients:

Shampoo.
Baking soda.
Water.
Natural or food coloring.

There is no exact dosage, so you need to gradually add all the ingredients in order to achieve the necessary consistency of the mass. To begin with, in any container you need to mix shampoo with water and dye. Then add soda, and stir again.

If there is too much soda, then you will need to add some more water. Therefore, see for yourself what might be lacking for the necessary density of the future toy.

From the first time, a lizun may not work out, but a little practice and you will already be able to determine the required amount of ingredients by eye.

How to make a lizun without sodium tetraborate and without PVA glue

The store toy contains chemical elements that can harm the health of the child. Therefore, it is recommended to make the toy yourself without glue and sodium tetraborate. If you want to make absolutely safe slime, then you can use flour. To do this, we will need to prepare the following ingredients:

Dye.
Cold and hot water.
Flour.

You need to sift 2 cups flour into a small bucket, add about 60-70 ml of cold water, after which, in the same amount of hot water, but do not use boiling water, as the toy will not work. Now mix everything thoroughly until smooth. No lumps should remain in the mixture.

In the next step, add a small amount of natural or food coloring. The mixture needs to be mixed well. After that, it should become sticky. Send the mass to the refrigerator for 3-4 hours. After this time, the child can enjoy the new toy.

Toothpaste slime

You can make a lizun from regular toothpaste. There are many recipes, but we will consider two ways.

No. 1 in a water bath

Squeeze out the amount of any toothpaste into a bowl.
Put a frying pan with water on the stove and wait for the liquid to boil.
Put a bowl of pasta in a water bath.
Cook for 15 minutes, while the toothpaste must be constantly mixed.
As a result, a dry, non-flowing mass should be obtained. Leave it to cool completely.
Lubricate hands with vegetable oil and mash lizun for several minutes.
After such procedures, the lysun should stretch well, become elastic, but not tear.

The whole process took about 20 minutes.

No. 2 in the microwave

A bowl of toothpaste should be put in the microwave for about 2 minutes.
Remove the plate, mix thoroughly, and return to the microwave for 3 minutes.
The result should be a dry and shriveled mass.
Apply cosmetic oil to lizun and rinse thoroughly.

If necessary, sparkles can be added to the mass, which girls will really like.

Simple lizun from the water

There is a very simple way to make a toy. It does not contain any toxic or chemical substances. In order to make a slime you need to prepare:

200 ml of water.
200 g of starch.

It is necessary to mix the ingredients in equal proportions. To do this, it is recommended to use an ordinary glass. Mix the mass thoroughly, if necessary add one or another ingredient to achieve the necessary consistency. Crumple well and the slime is ready.

Of course, such a toy is significantly different from the store counterpart, but it is absolutely safe. If necessary, you can add a little food coloring to get the desired color.

Shaving foam slime

Consider another option. The base of the toy will be a regular shaving foam. To make an elastic slime, you need to prepare the following ingredients:

Shaving foam.
Borax.
PVA glue.
Dye.
Water.

Now we begin to manufacture:

In a bowl, mix warm water (50 ml) with borax (1.5 tsp).
Stir thoroughly to completely dissolve the crystals.
In a separate bowl, mix glue with shaving foam well.
Add 2 tsp of prepared solution from borax.
Mash the mass with a spatula. As a result, a sticky lump should turn out.
Then again add a small amount of borax.
Mix the mass until it lags behind the walls of the dishes.
Crumple in hands, and the slime is ready.

To add color to the toy, you can add a small amount of food coloring.

DIY starch slime

Now try to make the toy the most popular way. Such a lizun practically does not differ from the store counterpart. To make it, we need:

100 g of PVA. It is important to note that the glue must be fresh.
Sodium tetraborate. You can use the powder, it is sold in a pharmacy.
Dye necessary color.

Stages of creation:

Add 50-60 ml of warm water to the container.
Add PVA glue. The density of the mass will depend on this ingredient, so during the process, you can change its amount.
Add 1 vial of sodium tetraborate. And if you decide to use the powder, then it must be dissolved in water.
After that add the selected dye.

Now you need to pour the whole mixture into a plastic bag and mash it for several minutes. The child will be pleased with the new toy.

How much does a lizun cost in a store?

Modern manufacturers offer to purchase a toy in different versions:

Glowing.
Solid.
Liquid.
In the form of animals or insects.
In the grids.
In the banks.
In packages.
Transparent.
Other.

It is from this that the price will depend. The minimum price is 15-20 rubles. You can buy a lizun in a store or on the Internet. Today you will find a large number of offers.

In the late 90s of the twentieth century, the cartoon "Ghostbusters" was released. The most interesting hero was Lizun - a pretty green ghost. It was small, but very gluttonous.

The viewer liked the slime so much that it became the prototype of an interesting toy, which children and adults are delighted with. The toy has become very popular, and many craftsmen already know how to make a slime at home.

During fun with a lizun, the vestibular apparatus, fine motor skills and motor activity develop well. This will help little owners of toys in development, and adults - in a warm-up.

Playing with a lizun is fun, but you need to remember that you can’t throw it on a surface that is painted with water-based emulsion paint, or on any other surfaces that do not wash. A bold mark remains.

A toy can not only be amused, but also grown, and even propagated. Lizuns can become pregnant. Their “pregnancy” looks like a bubble a few millimeters inside. In order for the reproduction to be successful, the lizun must be removed to a dark place until a descendant appears.

A simple recipe for making lizun

One of the simplest and easiest recipes is making a toy from water and starch. To do this, take the ingredients in the same amount and mix. Color can be given with brilliant green, food coloring or gouache. Before you make a slime from water and starch, you should think again - the simplicity of manufacture affects its appearance and jumping ability.

Temporary toy

Before you make a slime from soda, you need to pay attention to the fact that it loses its plasticity after 3 days, but it can be made very quickly. Such a toy is good if the child quickly gets bored. The slime from soda will not have time to get tired, but if the children do not have time to play enough, it can be quickly built again.

How to make a slime from soda? First, the necessary materials and utensils are prepared. For manufacturing you will need:

capacity (you can use the bottom of the plastic bottle);
stick for stirring;
glass;
soda - 1 tbsp. l .;
water - 100 g;
glue (better PVA) - 50 g;
dye.

The glue is mixed with half the water. The mixture should be homogeneous and thick. It resembles milk or cream in color. To make the toy color, add dye. It is better to take food colors - so the lizun will turn out translucent. Separately, in a glass, dilute soda in the remaining part of the water. Pour the soda solution into the colored glue mixture and mix well. After the substance begins to thicken, it is removed from the container and checked to see how soft it is. The toy is ready, and now it can be used for its intended purpose.

Toy made of water and borax

Many people ask the question "How to create a dense toy, what components will be needed?" So, how to make a slime? Sodium tetraborate for its manufacture will need a little, but you can find it in almost any pharmacy. Making a toy at home with your own hands will not be difficult if there are such components:

sodium tetraborate or, as it is also called, borax (can be purchased at a pharmacy without a prescription, you will need a powder or solution of 4%);
pVA glue - it is important that it is not dried;
water at room temperature - a little more than a glass;
dye - food coloring, zelenka or gouache;
mixing bowl and stick.

In a quarter glass of water at room temperature, the same amount of PVA glue is poured. Then you need to add dye. Gently mixing, sodium tetraborate is introduced. The solution will need half a glass. If you use powder for cooking, then first 1 tablespoon of the component is dissolved in water.

Dyeless Slime

You can make a toy without the use of dye. How? Make a slime from shampoo. The color will be the same as the shampoo.

For cooking you will need:

Glue "Titan" (300 g) - you can buy it in construction stores.
Shampoo (200 g) - you can use cheap shampoo, it’s not necessary to take expensive.

The ingredients are thoroughly mixed until the substance becomes the necessary consistency.

To make a toy in this way is very simple and quick, in addition, it has a good appearance and is convenient during the game. Before making a lizun from shampoo, select its color. Get creative - add glitter!

Alcohol lick

A beautiful and interesting toy is obtained from alcohol and borax. To create it you will need:

polyvinyl alcohol (sold in powder form);
borax or borax;
dye;
water.

To begin with, the alcohol powder is mixed with water and put on fire. Boil a solution of polyvinyl alcohol for 45 minutes over low heat. While alcohol is brewing, it should be constantly stirred so that it does not burn.

When the alcohol is ready, you need to put it to cool to room temperature. In the meantime, you can do the rest of the components. Borax is dissolved in water. A glass of water will need 1-2 tablespoons of powder. The crystals should dissolve well in water.

Now you can mix polyvinyl alcohol and borax solution. They are combined in a ratio of 3 to 1 - for 3 parts of alcohol, 1 part of a solution of borax is taken.

Plasticine slime

How to make a slime without glue? One solution will be this method. You will need food gelatin, plasticine and water. You need to mix 1 tablespoon of gelatin with a glass of water. Bring gelatin with water to a boil and cool.

The disadvantage of this lizun is that it is not very elastic and has a specific smell of plasticine.

A simple version of starch

Before you make a slime from water, starch and glue, prepare all the ingredients and appliances. You will need:

water;
liquid starch (use not food, but one that bleaches things);
glue;
dye;
bag.

First, water and glue are mixed. They add liquid starch and dye for color. All is well mixed and sent to a plastic bag. In the bag, the whole mixture mixes well. Water may remain during cooking. This is not scary. You need to get a well-mixed slime from the package, after which it will flow and will be ready for games. By the way, this recipe is good for those who are looking for how to make slizun without sodium.

Edible lizun

For the sweet tooth, there’s an edible slime recipe. To prepare it, you will need the following ingredients:

condensed milk - 1 can of 400 grams;
corn starch - 1 tablespoon;
food coloring.

The cooking process begins with the fact that the condensed milk is poured into the pan. Corn starch is added to it. A pan with condensed milk and starch is put on fire. The mixture is boiled, stirring constantly.

When milk with starch thickens, it is removed from the heat. Food coloring is added to the mixture. The amount of dye depends on how saturated the color is to be obtained (approximately 10-15 drops).

After this, the lizun must be cooled. Now you can play or eat with him. If the slime was prepared for food, it is not worth decorating it with spangles or other inedible materials.

How to decorate a lizun

Making a lizun with your own hands is a great pleasure, and if it is beautiful and not the same as everyone else, the child will also be proud of his abilities.

You can decorate it by adding spangles of various sizes, shapes and colors, small beads and different figures to the mass during cooking. Gives individuality and the use of several colors.

Before making a slime from water and other materials, think over its appearance and start cooking. Decoration ideas may come to mind during its creation, embody them!

In addition to appearance, the toy may differ in smell. To do this, add a few drops of perfume or essential oils to it. Imagine and embody these fantasies, making a toy. Making a lizun at home is not just using template recipes. This is the embodiment of their creative ideas.

How to extend the life of a toy

It is better to store a “ghost” in a box or a jar; you can use a regular plastic bag if there is no suitable place.
Protect the lizun from sunlight and heat. It is better to store it in a dark and cool place.
The lizun does not like to lie idle. The more they play with him, the longer he will live.
You can’t wash a homemade slime. It can lose its properties and deteriorate.

Liquid lizun and its recovery

Liquid lizun, or chewing gum for hands, is easily stretched over the whole hand, like a glove. In addition, such a slime can be transfused. If you know how to make a slime from water and soda or starch, it will not be difficult. You just need to experiment with consistency.

A hardened toy is also renewed with water. To do this, the water is carefully added dropwise and knead the lizun well. You can only restore a toy in this way with water in it.

Before you make a homemade slime, you need to consider that the toy may not work the first time. But this is not a reason to be upset.

Experiment with the components and their quantity and be sure to succeed! Of course, you can buy a ready-made toy, but playing with your work is much more interesting.

Provide your child with positive emotions by giving him a lizun - a toy whose prototype is a ghost from the popular film of the end of the last century “Ghostbusters”. Like that funny cast, slim stretches, spreads and does not have a constant shape.

Although this toy can be bought at any children's store, it is also easy to make it yourself. You decide what density and color to make a slime. There are tons of options without PVA glue. Below we consider a few of these.

We make a slime from detergents

How to make a slime from shampoo without It’s really easy. To make it, you will need the components that are found in every home:

shampoo;
shower gel or dishwashing liquid.

First, select a container where you mix shampoo and (dishwashing liquid) in equal proportions. It is important that the funds do not contain granules, then the lizun will turn out to be transparent. After mixing, until you get a homogeneous mass, and then put the container with the mixture in the refrigerator.

The very next day, the toy can be handed over to the child. But it is necessary to ensure that he does not pull the slime in his mouth, and after the game he washed his hands. Such a lizun should be stored in a refrigerator in a closed container. It should also be thrown away when a lot of debris sticks to it. Because it is because of it, the lizun loses its properties. In addition, the maximum shelf life is one month.

Flour lick

This is a relatively safe slime that is suitable for even small children to play. Moreover, if natural dyes are used instead of food colors. Although in this case the toy will not be so bright.

Now we will consider how to make a slime without glue PVA and tetraborate. As for the previous recipe, you will need materials that are at hand for any hostess:

flour;
hot water;
cold water;
dyes.

How to make a slime without glue PVA? First take a bowl or any other deep container. Sift into it two glasses of flour, so the mass will be uniform and easier to cook. Then add cold water, and then hot, but not boiling water, about a quarter cup each. Now you need to mix the mixture to a uniform consistency, it is important that there are no lumps in it.

Then add a few drops of dye: food or natural - it depends on your desire. Mix the sticky mixture again. Then put the container in the refrigerator for several hours. When the slime has completely cooled, it can be handed over to the child for the game.

Lizun from the water

How to make a slime from water without PVA glue? Consider another option for creating a toy. It is incredibly easy to manufacture and is considered the most environmental. For this you will need:

warm water;
starch (may be corn);
dye.

Making toys

How to make a slime without glue PVA? In equal proportions, mix warm water and starch until a homogeneous (without lumps) mass. Add dye and mix thoroughly again, after which form balls from the resulting mass. And now - the slime is ready.

It is important to remember that the temperature of the water should not be room or cold - then it is more difficult to knead the slime. In addition, do not put too much starch, because of this the slim can become hard.

Plasticine Lizun

How to make a slime without sodium and PVA glue? There are tons of ways. Now let's get acquainted with the next of them. The advantage of plasticine slim is that it does not blur, keeping the look that you gave it. Use such materials for its manufacture:

edible gelatin;
plasticine.

How to make a slime without PVA? First you need a metal bowl. Type cold water into it. There, dissolve the gelatin in the proportion indicated on its packaging. Next, leave it to infuse for an hour. After the specified time, put the bowl on the fire - the liquid should begin to boil. As soon as this happens, it must be removed from the fire.

Next, you need to warm up plasticine in your hands (about 100 grams). Then you need to pour water (50 ml) into a plastic container. Then use a spatula to mix it with plasticine. Now pour gelatin into plasticine and knead until you get a homogeneous mass. And the final stage of manufacturing - put the mixture in the refrigerator until it cools completely.

We figured out how to make a slime without PVA glue and starch, but it does not always turn out right away right away. Therefore, we will further consider the options and reasons for why and what should be done if the slim turned out to be wrong.

Naturally, much depends on the quality of the materials used in the manufacture of the slime, their proportions are also important. In the recipes they are indicated with approximately no accuracy, and therefore you have room here for experiments with the consistency of lizun.

What to do if the uniformity of the slime is broken? In this case, it is worth kneading it well for several minutes. After which it will become viscous and uniform.

If it is too sticky - it reaches for a spoon with threads, and sticks to the fingers so that it just does not lag behind - it means that the mixture needs to be a little liquefied. Here, a small amount of ordinary water will help you, depending on your chosen method of making a slime.

Maybe vice versa, the mass stretches, but it does not stick to the fingers. The reason in this case is an excess of fluid in the slime. If this happens, then you should drain the excess powder solution, starch or water. Or you can add some binding material, such as flour. Then again knead the resulting mass.

Little conclusion

Now you know how to make a slime without PVA. After you have made the toy, you should make sure that your beloved child does not throw a lizun into the wall, otherwise there will be greasy spots on the wallpaper. And from playing slim on fleecy surfaces, hairs will stick to the toy.

It is important to know that its shelf life is an average of one and a half to two weeks. And in between games, the lizun should be stored in the refrigerator, but not in the freezer. At the same time, do not forget to place it in a container and close it with a lid or in a plastic bag. This is done so that it does not dry out due to contact with open air.

Also, to extend the service of the slim, you can wipe it with alcohol, removing the adhering debris. Do not wash it in the sink - you risk washing the lizun down the drain. But if he began to lose his properties, just add a little water to it.

And the main thing to remember: always after playing with a lizun, you need to wash your hands and those parts of the body with which it came into contact with soap. So that the child does not have an allergic reaction.